1,720,990 research outputs found
Modelling discontinuity control on the development of Hell’s Mouth landslide
This paper focuses on numerical modelling and back analysis of the Hell’s Mouth landslide to provide improved understanding of the evolution of a section of the north coast of Cornwall, UK. Discontinuity control is highlighted through the formation of a ‘zawn’ or inlet, the occurrence of two successive landslides and evidence of ongoing instability through opening of tension cracks behind the cliff top. Several integrated remote sensing (RS) techniques have been utilised for data acquisition to characterise the slope geometry, landslide features and tension crack extent and development. In view of the structural control on the rock slope failures, a 3D distinct element method (DEM) code incorporating a discrete fracture network and rigid blocks has been adopted for the stability analysis. The onset and opening of tension cracks behind the modelled slope failure zones has also been studied by analysing the displacements of two adjoining landslide blocks, between which, a joint-related tension crack developed. In addition, a sensitivity analysis has been undertaken to provide further insight into the influence of key discontinuity parameters (i.e. dip, dip direction, persistence and friction angle) on the stability of this section of the coastline. Numerical modelling and field observations indicate that block removal and preferential erosion along a fault resulted in the formation of the inlet. The development of the inlet provides daylighting conditions for discontinuities exposed on the inlet slope wall, triggering the initial landslide which occurred on 23rd September 2011. Numerical modelling, and evidence from a video of the initial landslide, suggests that the cliff instability is characterised by a combination of planar sliding, wedge sliding and toppling modes of failure controlled by the discrete fracture network geometr
Maximizing Impacts of Remote Sensing Surveys in Slope Stability—A Novel Method to Incorporate Discontinuities into Machine Learning Landslide Prediction
This paper proposes a novel method to incorporate unfavorable orientations of discontinuities into machine learning (ML) landslide prediction by using GIS-based kinematic analysis. Discontinuities, detected from photogrammetric and aerial LiDAR surveys, were included in the assessment of potential rock slope instability through GIS-based kinematic analysis. Results from the kinematic analysis, coupled with several commonly used landslide influencing factors, were adopted as input variables in ML models to predict landslides. In this paper, various ML models, such as random forest (RF), support vector machine (SVM), multilayer perceptron (MLP) and deep learning neural network (DLNN) models were evaluated. Results of two validation methods (confusion matrix and ROC curve) show that the involvement of discontinuity-related variables significantly improved the landslide predictive capability of these four models. Their addition demonstrated a minimum of 6% and 4% increase in the overall prediction accuracy and the area under curve (AUC), respectively. In addition, frequency ratio (FR) analysis showed good consistency between landslide probability that was characterized by FR values and discontinuity-related variables, indicating a high correlation. Both results of model validation and FR analysis highlight that inclusion of discontinuities into ML models can improve landslide prediction accuracy
Weakly-supervised ROI extraction method based on contrastive learning for remote sensing images
ROI extraction is an active but challenging task in remote sensing because of
the complicated landform, the complex boundaries and the requirement of
annotations. Weakly supervised learning (WSL) aims at learning a mapping from
input image to pixel-wise prediction under image-wise labels, which can
dramatically decrease the labor cost. However, due to the imprecision of
labels, the accuracy and time consumption of WSL methods are relatively
unsatisfactory. In this paper, we propose a two-step ROI extraction based on
contractive learning. Firstly, we present to integrate multiscale Grad-CAM to
obtain pseudo pixelwise annotations with well boundaries. Then, to reduce the
compact of misjudgments in pseudo annotations, we construct a contrastive
learning strategy to encourage the features inside ROI as close as possible and
separate background features from foreground features. Comprehensive
experiments demonstrate the superiority of our proposal. Code is available at
https://github.com/HE-Lingfeng/ROI-Extractio
Modelling the Influence of Geological Structures in Paleo Rock Avalanche Failures Using Field and Remote Sensing Data
This paper focuses on the back analysis of an ancient, catastrophic rock avalanche located in the small city of Lettopalena (Chieti, Italy). The integrated use of various investigation methods was employed for landslide analysis, including the use of traditional manual surveys and remote sensing (RS) mapping for the identification of geological structures. The outputs of the manual and RS surveys were then utilised to numerically model the landslide using a 2D distinct element method. A series of numerical simulations were undertaken to perform a sensitivity analysis to investigate the uncertainty of discontinuity properties on the slope stability analysis and provide further insight into the landslide failure mechanism. Both numerical modelling and field investigations indicate that the landslide was controlled by translational sliding along a folded bedding plane, with toe removal because of river erosion. This generated daylighting of the bedding plane, creating kinematic freedom for the landslide. The formation of lateral and rear release surfaces was influenced by the orientation of the discrete fracture network. Due to the presence of an anticline, the landslide region was constrained in the middle-lower section of the slope, where the higher inclination of the bedding plane was detected. The landslide is characterized by a step-path slip surface at the toe of the slope, which was observed both in the modelling and the field. This paper highlights the combined use of a geological model and numerical modelling to provide an improved understanding of the origin and development of rock avalanches under the influence of river erosion, anticline structures, and related faults and fractures
Going Beyond Counting First Authors in Author Co-citation Analysis
The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
We provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
We conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
