1,720,992 research outputs found
Comparison of simple models for total nitrogen removal from agricultural runoff in FWS wetlands
Get PDFFree water surface (FWS) wetlands can be used to treat agricultural runoff, thereby reducing diffuse pollution. However, as these are highly dynamic systems, their design is still challenging. Complex models tend to require detailed information for calibration, which can only be obtained when the wetland is constructed. Hence simplified models are widely used for FWS wetlands design. The limitations of these models in full-scale FWS wetlands is that these systems often cope with stochastic events with different input concentrations. In our study, we compared different simple transport and degradation models for total nitrogen under steady- and unsteady-state conditions using information collected from a tracer experiment and data from two precipitation events from a full-scale FWS wetland. The tanks-in-series model proved to be robust for simulating solute transport, and the first-order degradation model with non-zero background concentration performed best for total nitrogen concentrations. However, the optimal background concentration changed from event to event. Thus, to use the model as a design tool, it is advisable to include an upper and lower background concentration to determine a range of wetland performance under different events. Models under steady- and unsteady-state conditions with simulated data showed good performance, demonstrating their potential for wetland design
Numerical modelling: A tool for better constructed wetland design
No full textABSTRACT There is a need for a simplified computer-based design tool for subsurface flow constructed wetlands (CWs) which is based on process-based numerical models. Parameters of existing design guidelines and rules have been derived from experiments under specific conditions. Therefore designing CWs using these parameters is limited to these conditions (i.e. temperature, wastewater composition, filter material, etc.). Process-based numerical models describe the main processes in CWs in detail. If the design of CWs is based on these models it will be possible to design CWs for a variety of different boundary conditions and therefore the main limitation of existing design guidelines and rules could be overcome. The use of process-based models is currently limited mainly due to their complexity in structure and use. To make numerical modelling a useful and applicable tool for design, a simplified computer-based design tool that does not require special knowledge of numerical modelling is needed. Additionally, simple models for pre-and post-treatments are also required. Besides allowing designs for various boundary conditions, design tools based on processbased models can also predict the dynamic behaviour of the designed system thus showing e.g., the higher robustness of CWs against fluctuating inflows and peak loads compared to other treatment solutions. Such a tool could increase the quality of CW design and the acceptance and use of CW simulation in practice
Applying Process-Based Models for Subsurface Flow Treatment Wetlands: Recent Developments and Challenges
No full textTo date, only few process-based models for subsurface flow treatment wetlands have been developed. For modelling a treatment wetland, these models have to comprise a number of sub-models to describe water flow, pollutant transport, pollutant transformation and degradation, effects of wetland plants, and transport and deposition of suspended particulate matter. The two most advanced models are the HYDRUS Wetland Module and BIO-PORE. These two models are briefly described. This paper shows typical simulation results for vertical flow wetlands and discusses experiences and challenges using process-based wetland models in relation to the sub-models describing the most important wetland processes. It can be demonstrated that existing simulation tools can be applied for simulating processes in treatment wetlands. Most important for achieving a good match between measured and simulated pollutant concentrations is a good calibration of the water flow and transport models. Only after these calibrations have been made and the effect of the influent fractionation on simulation results has been considered, should changing the parameters of the biokinetic models be taken into account. Modelling the effects of wetland plants is possible and has to be considered when important. Up to now, models describing clogging are the least established models among the sub-models required for a complete wetland model and thus further development and research is required
Numerical modelling: a tool for better constructed wetland design?
No full textThere is a need for a simplified computer-based design tool for subsurface flow constructed wetlands (CWs) which is based on process-based numerical models. Parameters of existing design guidelines and rules have been derived from experiments under specific conditions. Therefore designing CWs using these parameters is limited to these conditions (i.e. temperature, wastewater composition, filter material, etc.). Process-based numerical models describe the main processes in CWs in detail. If the design of CWs is based on these models it will be possible to design CWs for a variety of different boundary conditions and therefore the main limitation of existing design guidelines and rules could be overcome. The use of process-based models is currently limited mainly due to their complexity in structure and use. To make numerical modelling a useful and applicable tool for design, a simplified computer-based design tool that does not require special knowledge of numerical modelling is needed. Additionally, simple models for pre- and post-treatments are also required. Besides allowing designs for various boundary conditions, design tools based on process-based models can also predict the dynamic behaviour of the designed system thus showing e.g., the higher robustness of CWs against fluctuating inflows and peak loads compared to other treatment solutions. Such a tool could increase the quality of CW design and the acceptance and use of CW simulation in practice.</jats:p
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
- …
