1,720,978 research outputs found
Overturning of the facade in single-nave churches under seismic loading
No full textThe out-of-plane collapse of the facade represents one of the major threats and the most frequent cause of damages of churches due to strong earthquakes. Due to the slenderness of the facade and the lack of adequate connections to the side walls and the wooden roof, the seismic action can trigger the overturning. A detailed assessment is therefore required to judge whether or not to intervene. This paper presents an approach for the seismic assessment of the stability of the facade, through a discrete element model based on a photographic survey, with the aim of representing the actual geometry and arrangement of the stone units and their effects on the kinematics of the overturning. The collapse mechanism is simulated with both, quasi-static pushover and dynamic pulse-based analyses and the results compared to those of conventional rigid-body kinematics. The proposed approach is then applied to seven masonry churches that suffered severe damages during the 2009 L'Aquila (Italy) earthquake and the failure mode provided by the analyses is compared to the damages caused by the earthquake. The method is able to give a reliable estimate of the expected failure mechanism, taking into account the quality of the masonry and the connections to the side walls, while also providing the seismic acceleration required to trigger the motion and the ultimate displacement beyond which collapse occurs
A Discrete Element Model for Masonry Vaults Strengthened with Externally Bonded Reinforcement
No full textThe paper investigates the effectiveness of two-dimensional Discrete Element Method as a tool for structural analysis of arches provided with buttresses and backfill and strengthened with externally bonded reinforcement. Masonry vault and buttresses are modelled as an assembly of 2D rigid blocks interacting through non-linear contact joints, the backfill is discretized into deformable elastic-plastic triangular elements, while the reinforcement is modelled by means of truss elements bonded to the substrate through non-linear springs. A parametric analysis on the influence of material parameters and the effect of the discretization of the backfill is carried out, and the outcome of different reinforcement systems, consisting of Steel Reinforced Grout applied either at the intrados or at the extrados, are analysed. The comparison with experimental full-scale tests proved the ability of the numerical approach to capture hinges position, load bearing capability, as well as the increase in deflection and load capacity provided by the reinforcement
Cold Consolidation of Pharmaceutical Waste Glass Powders Through Alkali Activation and Binder Jet 3D Printing
Full text linkThe recent COVID-19 emergency has led to an impressive increase in the production of pharmaceutical vials. This has led to a parallel increase in the amounts of waste glass; manufacturers typically recover material from faulty containers by crushing, giving origin to an unrecyclable fraction. Coarse fragments are effectively reused as feedstock for glass melting; on the contrary, fine powders (<100 microns), contaminated by metal and ceramic particles due to the same crushing operations, are landfilled. Landfilling is also suggested for pharmaceutical containers after medical use. This study aims at proposing new opportunities for the recycling of fine glass particles, according to recent findings concerning alkali activation of pharmaceutical glass, combined with novel processing, i.e., binder jetting printing. It has already been shown that pharmaceutical glass, immersed in low-molarity alkaline solution (not exceeding 2.5 M NaOH), undergoes surface dissolution and hydration; cold consolidation is later achieved, upon drying at 40–60 °C, by a condensation reaction occurring at hydrated layers of adjacent particles. Binder jetting printing does not realize a full liquid immersion of the glass powders, as the attacking solution is selectively sprayed on a powder bed. Here, we discuss the tuning of key parameters, such as the molarity of the attacking solution (from 2.5 to 10 M) and the granulometry of the waste glass, to obtain stable printed blocks. In particular, the stability depends on the formation of bridges between adjacent particles consisting of strong T-O bonds (Si-O-Si, Al-O-Si, B-O-Si), while degradation products (concentrating Na ions) remain as a secondary phase, solubilized by immersion in boiling water. Such stability is achieved by operating at 5 M NaOH
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Additive manufacturing of inorganic components using a geopolymer and binder jetting
No full textA large volume binder jetting printer was employed to fabricate prism-shaped geopolymer components. A two parts system was used, comprising: 1) a highly alkaline solution, which was jetted on a powder bed containing aggregates (sand particles), and 2) a reactive solid component (pure metakaolin or metakaolin plus fast setting cement), present in the powder bed. In order to be able to generate appropriate, defect-free powder layers and suitably discharge the powders from the hopper feeding the layer forming system, a granulation approach was employed. The jetted alkaline solution effectively reacted with the metakaolin powders present in the granules, forming a geopolymer. Printed geopolymer parts, fabricated with the addition of 30 wt% metakaolin, possessed a compressive strength of ~20 MPa, even with ~30 vol% of residual porosity, and no significant variation in the compressive strength was observed after leaving the printed parts submerged in water for 1 week
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Distinct element modelling of the seismic response of historical masonry constructions: insight on the out-of-plane collapse of façades.
No full text- …
