1,720,965 research outputs found
Numerical analysis of the effects of fire with cooling phase on reinforced concrete members
No full textFire exposed structures may collapse during or after the fire decay phase, with risks for building occupants and firefighters; yet, understanding of the effects of the fire decay phase on structural loadbearing capacity remains limited. This paper describes a numerical investigation on the behavior of reinforced concrete columns, beams, and walls under natural fires including cooling down phases. Finite element models are benchmarked against experiments capturing the behavior during heating. The models are then used to simulate the structural response of the concrete members under fires with various cooling rates and load ratios. The analyses capture the irreversibility of material properties through tracing of the temperature history in the structure. The results show that temperatures and deformations continue increasing after the end of the fire heating phase. As a result, concrete columns, beams, and walls may fail during the cooling phase. Faster cooling rates reduce the likelihood of failure in cooling. For beams, failure can be inferred from the maximum reinforcement temperature reached throughout the fire, but for columns and walls a thermal–mechanical analysis of the member throughout the fire history is needed. A relationship is proposed to evaluate the burnout resistance from the fire resistance rating and cooling rate. The presented numerical method allows assessing the structural stability throughout a fire event, an important requirement for designing a fire resilient built environment
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Experimental investigation of structural failure during the cooling phase of a fire: Timber columns
No full textThis paper describes fire tests on loaded glued laminated timber columns in which the structural response was measured during the heating and cooling phases. Identi- cal columns with 280  280 mm2 cross-section and 3.7 m length were tested under various heating durations in a standard furnace to investigate integrity to full burn- out. Two of the columns were subjected to ISO 834 heating until failure and their measured fire resistance was 55 and 58 min, respectively. Two columns were sub- jected to 15 min of ISO 834 heating followed by controlled cooling; these columns failed during the cooling phase, respectively after 98 and 153 min. Flame self- extinction occurred after approximately 40 min while smoldering continued locally. Two columns tested under 10 min of ISO 834 heating both survived the defined heating–cooling exposure. Thermocouples inside the columns show sustained tem- perature increases for hours after the end of the heating phase. These full-scale fur- nace experiments show that timber columns may fail during the cooling phase after exposure to standard heating for about 25% of the standard fire resistance duration. These results, in line with previous numerical predictions, highlight the need for fur- ther investigation into fire safety until full burnout for timber structures
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Experimental investigation of structural failure during the cooling phase of a fire: concrete columns
No full textStructures may collapse during the cooling phase of a fire, yet standard furnace tests only measure the response under heating. There lacks experimental test protocols and design methods to assess resistance until burnout. This paper describes a new experimental approach for burnout resistance evaluation, reports experimental data on loaded reinforced concrete columns in furnace tests with cooling down phases, and presents numerical models of the tests. The test results show that columns designed for a standard fire resistance of 60 min exhibited a fire resistance of 83 min in the furnace but failed during the cooling phase when the burners were shut off after 72 min while the load was maintained. Two other specimens survived exposure to heating of 45 and 55 min, respectively, and their residual capacity was measured. Finite element analyses show agreement with the tests, showing applicability of numerical methods for evaluating burnout resistance of concrete columns. These findings demonstrate experimentally that delayed thermal-mechanical effects can jeopardize structural stability in real fires, and provide a framework to measure these effects. Moving beyond fire resistance to quantify the response until burnout will support designs for safety of occupants and firefighters throughout the fire and promote repairability and resilience
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
