158 research outputs found
Design and Characterization of an RF Applicator for In Vitro Tests of Electromagnetic Hyperthermia
No full textThe evaluation of the biological effects of therapeutic hyperthermia in oncology and the precise quantification of thermal dose, when heating is coupled with radiotherapy or chemotherapy, are active fields of research. The reliable measurement of hyperthermia effects on cells and tissues requires a strong control of the delivered power and of the induced temperature rise. To this aim, we have developed a radiofrequency (RF) electromagnetic applicator operating at 434 MHz, specifically engineered for in vitro tests on 3D cell cultures. The applicator has been designed with the aid of an extensive modelling analysis, which combines electromagnetic and thermal simulations. The heating performance of the built prototype has been validated by means of temperature measurements carried out on tissue-mimicking phantoms and aimed at monitoring both spatial and temporal temperature variations. The experimental results demonstrate the capability of the RF applicator to produce a well-focused heating, with the possibility of modulating the duration of the heating transient and controlling the temperature rise in a specific target region, by simply tuning the effectively supplied power
Design and Validation of Experimental Setup for Cell Spheroid Radiofrequency-Induced Heating
No full textWhile hyperthermia has been shown to induce a variety of cytotoxic and sensitizing effects on cancer tissues, the thermal dose–effect relationship is still not well quantified, and it is still unclear how it can be optimally combined with other treatment modalities. Additionally, it is speculated that different methods of applying hyperthermia, such as water bath heating or electromagnetic energy, may have an effect on the resulting biological mechanisms involved in cell death or in sensitizing tumor cells to other oncological treatments. In order to further quantify and characterize hyperthermia treatments on a cellular level, in vitro experiments shifted towards the use of 3D cell spheroids. These are in fact considered a more representative model of the cell environment when compared to 2D cell cultures. In order to perform radiofrequency (RF)-induced heating in vitro, we have recently developed a dedicated electromagnetic field applicator. In this study, using this applicator, we designed and validated an experimental setup which can heat 3D cell spheroids in a conical polypropylene vial, thus providing a reliable instrument for investigating hyperthermia effects at the cellular scale
Oncologic Thermoradiotherapy: Need for Evidence, Harmonisation, and Innovation
No full textThe road of acceptance of oncologic thermotherapy/hyperthermia as a synergistic modality in combination with standard oncologic therapies is still bumpy. This is partially due to the lack of level I evidence from international, multicentric, randomized clinical trials including large patient numbers and a long term follow-up. Therefore we need more level I EVIDENCE from clinical trials, we need HARMONISATION and global acceptance for existing technologies and a common language understood by all stakeholders and we need INNOVATION in the fields of biology, clinics and technology to move thermotherapy/hyperthermia forward. This is the main focus of this reprint. In this reprintyou find carefully selected and peer-reviewed contributions from Africa, America, Asia, and Europe. The published papers from leading scientists from all over the world covering a broad range of timely research topics might also help to strengthen thermotherapy on a global level
Oncologic Thermoradiotherapy: Need for Evidence, Harmonisation, and Innovation
No full textThe road of acceptance of oncologic thermotherapy/hyperthermia as a synergistic modality in combination with standard oncologic therapies is still bumpy. This is partially due to the lack of level I evidence from international, multicentric, randomized clinical trials including large patient numbers and a long term follow-up. Therefore we need more level I EVIDENCE from clinical trials, we need HARMONISATION and global acceptance for existing technologies and a common language understood by all stakeholders and we need INNOVATION in the fields of biology, clinics and technology to move thermotherapy/hyperthermia forward. This is the main focus of this reprint. In this reprintyou find carefully selected and peer-reviewed contributions from Africa, America, Asia, and Europe. The published papers from leading scientists from all over the world covering a broad range of timely research topics might also help to strengthen thermotherapy on a global level
Overview of bladder heating technology: matching capabilities with clinical requirements.
No full textModerate temperature hyperthermia (40-45°C for 1 h) is emerging as an effective treatment to enhance best available chemotherapy strategies for bladder cancer. A rapidly increasing number of clinical trials have investigated the feasibility and efficacy of treating bladder cancer with combined intravesical chemotherapy and moderate temperature hyperthermia. To date, most studies have concerned treatment of non-muscle-invasive bladder cancer (NMIBC) limited to the interior wall of the bladder. Following the promising results of initial clinical trials, investigators are now considering protocols for treatment of muscle-invasive bladder cancer (MIBC). This paper provides a brief overview of the devices and techniques used for heating bladder cancer. Systems are described for thermal conduction heating of the bladder wall via circulation of hot fluid, intravesical microwave antenna heating, capacitively coupled radio-frequency current heating, and radiofrequency phased array deep regional heating of the pelvis. Relative heating characteristics of the available technologies are compared based on published feasibility studies, and the systems correlated with clinical requirements for effective treatment of MIBC and NMIBC
MR thermometry accuracy and prospective imaging-based patient selection in MR-guided hyperthermia treatment for locally advanced cervical cancer
No full textThe efficacy of a hyperthermia treatment depends on the delivery of well-controlled heating; hence, accurate temperature monitoring is essential for ensuring effective treatment. For deep pelvic hyperthermia, there are no comprehensive and systematic reports on MR thermometry. Moreover, data inclusion generally lacks objective selection criteria leading to a high probability of bias when comparing results. Herein, we studied whether imaging-based data inclusion predicts accuracy and could serve as a tool for prospective patient selection. The accuracy of the MR thermometry in patients with locally advanced cervical cancer was benchmarked against intraluminal temperature. We found that gastrointestinal air motion at the start of the treatment, quantified by the Jaccard similarity coefficient, was a good predictor for MR thermometry accuracy. The results for the group that was selected for low gastrointestinal air motion improved compared to the results for all patients by 50% (accuracy), 26% (precision), and 80% (bias). We found an average MR thermometry accuracy of 2.0 °C when all patients were considered and 1.0 °C for the selected group. These results serve as the basis for comprehensive benchmarking of novel technologies. The Jaccard similarity coefficient also has good potential to prospectively determine in which patients the MR thermometry will be valuable
The potential of adjusting water bolus liquid properties for economic and precise MR thermometry guided radiofrequency hyperthermia
No full textThe potential of MR thermometry (MRT) fostered the development of MRI compatible radiofrequency (RF) hyperthermia devices. Such device integration creates major technological challenges and a crucial point for image quality is the water bolus (WB). The WB is located between the patient body and external sources to both couple electromagnetic energy and to cool the patient skin. However, the WB causes MRT errors and unnecessarily large field of view. In this work, we studied making the WB MRI transparent by an optimal concentration of compounds capable of modifying T2 * relaxation without an impact on the efficiency of RF heating. Three different T2 * reducing compounds were investigated, namely CuSO4, MnCl2, and Fe3 O4. First, electromagnetic properties and T2 * relaxation rates at 1.5 T were measured. Next, through multi-physics simulations, the predicted effect on the RF-power deposition pattern was evaluated and MRT precision was experimentally assessed. Our results identified 5 mM Fe3 O4 solution as optimal since it does not alter the RF-power level needed and improved MRT precision from 0.39◦ C to 0.09◦ C. MnCl2 showed a similar MRT improvement, but caused unacceptable RF-power losses. We conclude that adding Fe3 O4 has significant potential to improve RF hyperthermia treatment monitoring under MR guidance
- …
