1,721,168 research outputs found
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Controlling Light in Organic Microcavities
Full text linkThis thesis deals with the use of microcavity resonators for the control of light in organic active materials. In addition to the vertical confinement provided by highly reflecting mirrors in a vertical cavity surface emitting laser (VCSEL), in-plane patterning facilitates additional ways to manipulate the cavity dispersion and enables the observation of novel photonic modes in highly confined systems and an improved performance of organic solid state lasers. Furthermore, organic microcavities are employed for efficient spectrally sensitive photodetection in the near infrared.
In microcavities comprising two dielectric distributed Bragg reflectors sandwiching an organic active blend of the matrix molecule Alq3 and the laser dye DCM, optically pumped lasing is investigated, exhibiting a broad spectral tunability over 90 nm due to the large gain bandwith of the laser dye. To directly influence the microcavity dispersion, different interlayers are introduced into the system, facilitating a red-shift of the cavity resonance due to the formation of Tamm-plasmon-polariton states (when using plasmonic Ag interlayers) or an increase of the optical cavity thickness (when using non-absorbing layers such as SiO2). Both concepts are explored and enable strong spectral shifts on the order of 10 meV-100 meV when using interlayers of only few tens of nm in thickness. In order to enhance the optical quality of metal-organic microcavities, the growth of noble metal layers on top of organic films can be improved by the use of diffusion barriers, stopping the diffusion of metal atoms into the organics, and seed layers which provide an improved surface wetting. Both concepts in total lead to an enhancement of the quality factor of such devices by a factor of two.
The manipulation of the cavity resonance using different interlayers provides the ability to structure the photon energy landscape in the device plane on the microscale. Using photolithography, photonic wires and dots are fabricated to laterally restrict the photons in potential wells, leading to the observation of discretised energy spectra in two and three dimensions. To facilitate an in-depth investigation, dispersion tomography is utilised and yields the angle resolved emission of multi-dimensionally confined photons in all directions. In metal-organic photonic dots and triangular wedges, such three-dimensional trapping is exploited to reduce parasitic modes, leading to reduced thresholds of an organic microlaser by one order of magnitude. Complex transversal modes are observed in the device emission as a result of the strong lateral confinement that is achieved by such patterning.
The manipulation of the photon energy landscape can not only be utilised for enhanced confinement but also for the introduction of photonic lattices. By adding periodic stripes of either Ag or SiO2 into an organic microcavity, an optical Kronig-Penney potential is realised, directly showing the formation of photonic Bloch states in the microcavity dispersion. Utilising a modified Kronig-Penney theory, photons are assigned a polarisation-dependent effective mass, facilitating a quantitative allocation of calculated and observed modes and explaining the emergence of zero and pi-phase coupling of spatially extended supermodes. Finally, by utilising an two-beam excitation geometry, direct control over lasing from multiple discretised states can be exerted, enabling spectral and angular tunability of devices on the microscale.
In an alternative concept, a full microcavity stack is deposited onto a periodic grating which couples the waveguided (WG) modes in the active cavity layer to the vertical emission. Coherent interaction between linear WG and parabolic vertical modes is indicated by anti-crossing points where the dispersion of both overlaps. In this hybrid system, novel lasing modes arise not only at the position of the VCSEL parabola apex but also at points of hybridization, showing a drastically enhanced in-plane spatial coherence of at least 50 micrometer.
Finally, the concept of organic microcavities is applied towards efficient and spectrally sensitive photodetectors. Making use of the intermolecular charge transfer (CT) state in donor-acceptor blends of organic solar cells, the strong field enhancement of a microcavity is exploited to significantly increase the external quantum efficiency of the initially weak CT absorption at resonance. Consequently, near-infrared photodetection is enabled by cavity-enhanced CT state absorption, leading to devices showing competitive specific detectivities without the need of an external voltage and an EQE above 20% (18% at 950 nm) with a full width at half maximum of significantly below 50 nm. The detectors are shown to be tunable in a broad spectral range via the angular dispersion of the optical microcavity or a thickness variation of the electron and hole transport layers in the solar cell. These findings not only facilitate interesting applications but also enable the direct excitation and observation of the CT state that is integral to the working principles of organic solar cells.Die vorliegende Dissertation beschäftigt sich mit der Kontrolle über Emission und Absorption organischer aktiver Materialien mittels Mikrokavitätsresonatoren. Zusätzlich zum vertikalen Einschluss der Photonen zwischen hochreflektierenden Spiegeln in oberflächenemittierenden Mikrokavitäten (VCSEL, s.o.) werden Strukturierungen in der Bauteilebene hinzugefügt, um eine direkte Manipulation der Photonendispersion zu ermöglichen. Resultierend aus diesen Ergebnissen sind die Beobachtung neuartiger photonischer Moden sowie verbesserte Betriebseigenschaften von organischen Festkörperlasern. Desweiteren wird das Konzept der organischen Mikrokavität zur effizienten und spektral sensitiven Detektion von Nahinfrarot-Photonen angewendet.
In Mikrokavitäten aus zwei dielektrischen Bragg-Spiegeln (DBR), welche eine organische aktive Schicht aus dem Matrixmaterial Alq3 und dem Laserfarbstoff DCM einschliessen, wird optisch gepumptes Lasing beobachtet. Dabei ist die Emission spektral über einen weiten Bereich von 90 nm stufenlos einstellbar, was durch die hohe optische Gewinnbandbreite des Laserfarbstoffs ermöglicht wird. Um die Dispersion von Photonen in Mikrokavitäten direkt beeinflussen zu können, werden verschiedene Zwischenschichten in den Laser eingebracht, welche eine Rotverschiebung der Emission nach sich ziehen. In metall-organischen Kavitäten kann dieser Effekt durch die Bildung von Tamm-Plasmon-Polariton Quasiteilchen erklärt werden, die durch die Interaktion der optischen Moden mit den Plasmonen in einer dünnen Silberschicht entstehen. Alternativ werden nichtabsorbierende SiO2-Zwischenschichten eingefügt, welche die optische Kavitätsdicke vergrössern und ähnliche starke Rotverschiebungen der Emission von 10 meV-100 meV nach sich ziehen. Um die optische Qualität metall-organischer Kavitäten zu verbessern, wird das Wachstum der edlen Ag-Schicht auf amorphen organischen Schichten mithilfe von Diffusionsbarrieren und Keimschichten kontrolliert. Die Kombination beider Konzepte ermöglicht eine Verbesserung des Qualitätsfaktors solcher Bauteile um den Faktor 2.
Durch die Manipulation der Photonendispersion mithilfe dielektrischer und plasmonischer Zwischenschichten wird eine Strukturierung der photonischen Potentiallandschaft in der Bauteilebene auf Mikrometer-Skala ermöglicht. Mittels Photolithographie werden Photonische Drähte und Punkte hergestellt, welche das Licht auch lateral in Potentialtöpfen einschliessen und zur Beobachtung von diskretisierten Emissionspektren in zwei und drei Dimensionen führen. Um diese Untersuchungen zu erweitern, wird eine tomographische Methode entwickelt, um die winkelaufgelöste Dispersion dieser mehrdimensional eingeschlossenen Photonen in allen Richtungen aufzunehmen. Die Ergebnisse dieser Untersuchung werden in metall-organischen photonischen Punkten und Dreieck-Strukturen ausgenutzt und führen dabei zu einer Verringerung der Laserschwelle von bis zu einer Grössenordnung. Die dabei entstehenden komplexen Transversalmoden sind ein Zeichen für die starke Konzentration des Lichts in solchen Strukturen.
Die laterale Strukturierung organischer Mikrokavitäten kann nicht nur für den vollständigen Einschluss von Licht ausgenutzt werden, sondern ermöglicht weiterhin die Beobachtung von photonischen Bandstrukturen in periodischen Gittern. Solch periodische Strukturen bestehend entweder aus Silber oder SiO2 ermöglichen die Realisierung eines optischen Kronig-Penney Potentials in Mikrokavitäten was schlussendlich zur Beobachtung optischer Bloch-Zustände in der Dispersion führt. Durch eine Modifizierung der Kronig-Penney Theorie, bei der unter anderem den Photonen eine polarisationsabhängige effektive Masse zugewiesen wird, ist eine quantitative Berechnung der Modenpositionen in solchen Systemen möglich. In Theorie und experimentellen Untersuchungen wird dabei das Auftreten von 0- oder pi-phasengekoppelten räumlich ausgedehnten Supermoden erklärt. Mithilfe der Anregung durch zwei interferierende Laserstrahlen kann desweiteren eine direkte Kontrolle über die Wellenlänge sowie den Auskopplungswinkel der stimulierten Emission ausgeübt werden.
In einem alternativen Konzept der lateralen Strukturierung werden organische Mikrokavitäten auf periodische Gitter aufgedampft, was zu einer kohärenten Kopplung von Wellenleitermoden der aktiven Schicht in die vertikale Emission führt. Diese Moden treten als lineare Dispersion in winkelaufgelösten Spektren auf und zeigen eine direkte Interaktion mit der parabolischen Dispersion der VCSEL-Mode an (Anti-)Kreuzungspunkten. In diesem hybriden System lassen sich neuartige Lasermoden beobachten, welche nicht nur am Scheitelpunkt der Kavitätsparabel auftreten, sondern auch an Punkten, die durch die Hybridisierung beider Systeme entstehen. Diese Kopplung von vertikalen und lateralen Lasermoden zeigt eine drastisch erhöhte Kohärenzlänge von mindestens 50 Mikrometern in der Probenebene.
Schließlich wird das Konzept einer organischen Mikrokavität noch in absorbierenden Systemen eingesetzt. Durch das Einbringen einer organischen Solarzelle in eine optische Kavität wird eine starke Erhöhung des Felds im spektralen Bereich des sonst nur schwach absorbierenden intermolekularen Ladungstransferzustands in Donator-Akzeptor Mischschichten ermöglicht. Die Ausnutzung dieses Zustands ermöglicht eine spektral scharfe (Halbwertsbreite deutlich unter 50 nm) Detektion von Nahinfrarotphotonen mit einer externen Quanteneffizienz von über 20% (18% für 950 nm) und einer konkurrenzfähigen spezifischen Detektivität. In weiteren Untersuchungen zeigen sich diese Detektoren als spektral durchstimmbar, zum Einen durch die parabolische Dispersion der Mikrokavität, zum Anderen durch die Variation der Dicken der Elektron- und Lochtransportschichten. Diese Ergebnisse ermöglichen nicht nur interessante Anwendungen, sondern auch die direkte Beobachtung und Anregung des Ladungstransferzustandes, welcher eine zentrale Rolle in der Funktion organischer Solarzellen spielt
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Directed Interface Modifications by Genetically Engineered Surface Active Proteins
Full text linkThis work was performed in the framework of an interdisciplinary graduate program that focuses on the establishment and extension of innovative compounds for the packaging of electronic systems. Such chemically or biotechnologically tailored compounds can be used for the direct patterning of optically, magnetically or biologically functional structures in nano- and biotechnical products. In order to organize matter at the nanometer scale, imprinting litho-graphy techniques or self-organization processes are appropriate. Fine-tuning of numerous engineering processes requires continuous and high precision monitoring as well as control of diverse parameters. These demands are only partially met by physical or chemical components since they use surrogate parameters, measure off-line, or provide insufficient performances. Biological compounds, in particular protein-based feedback systems, fulfill certain system requirements to a considerable degree.
Hydrophobins and S-layer proteins are surface active proteins, produced by filamentous fungi or bacteria. In nature, these (self )assembly proteins form highly ordered and robust structures. In addition, their tolerance for different sequence manipulations and chemical modifications allows extensive functionalization of these nanometer-sized proteins. Hence, these surface active proteins can also be fused with other protein domains to create chimera, which retain function of both original proteins. In conclusion, both hydrophobins and S-layer proteins represent a versatile tool in numerous fields of applied biotechnology, medicine or diagnostics. But until now, efficient in vitro operation in molecular designed protein coatings is strongly restricted due to their complex assembly mechanism.
In the first phase of this work, it was demonstrated, that representatives of class I and class II hydrophobins tend to form multilayered structures on solid surfaces. It was found that only two protein orientations seems to be preferentially formed. In the process of assembly, the orientation of the first hydrophobin layer strictly depends on the substrate wettability. Consequently, each of the following hydrophobin layers is inverse oriented to the layer before. This alternating assembly mechanism has to be taken into account, when working with functionalized hydrophobins, because a hydrophobin-fused functional protein domain is exclusively located on one side of the protein. Due to the densely packed structure of surface active proteins, a fused functional domain, embedded between two hydrophobins is barely available for external reagents. Basically, the simultaneous existence of a broad spectrum of ordered and disordered assembly structures, demonstrated the need of an uniform protein film assembly for applications in fine-diagnostics or biomedicine.
With regard to molecular designed protein coatings, this work further aimed at establishing conditions to develop a method for a ‘layer-by-layer’ assembly of protein chimeras. Based on their amphiphilic character, self-assembly behavior of surface active proteins can be influenced by conventional ionic surfactants. In order to study the effect of surfactants on the composition and morphology of adsorbed protein films, contact angle measurements, nulling ellipsometry, SEM, AFM and AFAM were performed. It was found that the layer thickness of assembled protein films is strictly dependent on the amount of added surfactant. At certain threshold surfactant concentrations, hydrophobins and S-layer proteins assemble in uniform layers, which are as thick as expected for a protein monolayer or a bilayer. Assembled protein films are covered by a smooth surfactant layer, which prevents further protein assembly. AFAM measurements reveal the formation of well defined lattice structures under the coverage of surfactants. Even the removal of the surfactant layer is possible without inter-fering with protein specific secondary structures. Solvent accessibility and functionality of protein-fused domains was successfully demonstrated. As compared to conventional assembly techniques, this novel protein deposition method offers a possibility for a ‘directed’ protein coating on solid surfaces. In addition, it guarantees broadly ranged homogeneous assembly of protein chimeras on non-planar or even porous surfaces independent of their position.
Finally, a prototype for an interfacial FRET was developed in a close collaboration with the Institute of Physical Chemistry (TUD). This innovative FRET between semiconducting nano-particles and illuminating protein chimeras takes place across an oil/water interface. Hydro-phobins were used to stabilize artificial oil droplets in aqueous solution. These small proteins possess the ability to attach fused functional domains very close to an oil/water interface. When, in addition to this, an optically active nanostructure directly docks to the hydrophobin, the distance of a protein-fused domain and the nanostructure are in the range of the FÖRSTER radius. It was successfully demonstrated that quantum dots and fluorescent proteins fulfill the spectroscopic requirements of such a donor/acceptor pair. The FRET performance of these excitable oil droplets was examined as a ‘proof of concept’. Due to its modular design, this signal amplification setup could be exploited in numerous fields of technical application ranging from quantification of micronutrient to photothermal cancer therapy
Advances in Organic Microcavities: Electrical Tunability and High Current Density Excitation
Full text linkThere is a huge demand for low-cost and compact laser devices in particular for point-of-care diagnostic, sensing, or optical communication. Organic solid-state lasers (OSLs) have a great potential to fill that gap due to their specific properties such as high optical gain, low lasing threshold, and spectral tunability. To miniaturize OSLs for micro-optical circuits two aspects are required: The spectrum of the laser should be easily tunable, and the pumping energy should be provided in a simple and compact method, in the best case electrically.
In this work, we developed a simple, compact, easy to manufacture, and electrically tunable laser resonator using electroactive polymers. The cavity is formed between a highly reflecting distributed Bragg reflector (DBR) and a highly reflecting silver layer sandwiching a soft elastomer layer. A transparent electrode made by indium tin oxide is placed on the glass substrate below the DBR. If an external voltage between the transparent bottom electrode and the metal layer is applied, the elastomer layer is compressed by the electrostatic pressure, which leads to a blue shift of the optical modes of the microcavity. If an active material with a broad emission spectrum, such as organic molecules, is included inside the cavity layer, it enables the development of an electrically tunable OSL. Hence, we demonstrate a cost-effective approach towards an electrically tunable organic
laser source particularly suitable for easily processable lab-on-chip devices.
In the second part, a novel organic light emitting diode (OLED) architecture is realized enabling high current densities with low optical losses in the prospect of the realization of an electrically driven OSL. For this purpose, an additional highly conductive lateral transport layer (LTL) is introduced to achieve expansion of the charge recombination to the electrode-free area. Simulations by equivalent circuit approach allow for an analysis of the lateral distribution of the vertical current density to predict the lateral current density distribution in the high excitation regime (current densities ≈ 1 kA/cm² ). Moreover, the Joule heating of the device is reduced by restructuring the OLED layer stack. Thus, high current densities close to the predicted lasing threshold of 1 kA/cm² could be achieved. The results of the thesis presenting a significant step towards the development of an
electrical pumped OSL.:1 Introduction
2 Theoretical Background
2.1 Optical Cavities
2.1.1 Fabry-Perot Resonator
2.1.2 Transfer Matrix Algorithm
2.1.3 Distributed Bragg Reflector
2.1.4 Optical Microcavities
2.1.5 Tunable Optical Cavities
2.2 Organic Semiconductors
2.2.1 Properties
2.2.2 Electronic Structure
2.2.3 Absorption and Emission Spectra
2.2.4 Electrical Current
2.2.5 Doping
2.3 Organic Light Emitting Diodes
2.3.1 Basic OLED
2.3.2 Pin-OLED
2.3.3 OLEDs at High Excitation
2.4 Organic Lasers
2.4.1 Fundamentals of a Laser
2.4.2 Organic Molecules as Active Medium
2.4.3 Electrical Pumping of Organic Lasers
2.5 Dielectric Elastomer Actuators
2.5.1 Principle of Operation
2.5.2 Silicone-Based Materials
2.5.3 Compliant Electrodes
3 Experimental Methods
3.1 Sample Fabrication
3.1.1 Dielectric Elastomer Actuators
3.1.2 Organic Light Emitting Diodes
3.2 Characterization Techniques
3.2.1 Optical Characterization
3.2.2 Electrical Characterization
4 Tunable Optical Cavities with Dielectric Elastomer Actuators
4.1 Design of the Tunable Optical Microcavity
4.1.1 Tunable Cavity with Thin Metal Electrode .
4.1.2 Compliant Metal Electrodes on Dielectric Elastomer Films
4.1.3 Actuator Performance of Thick Metal Electrode
4.1.4 Electro-mechanical Characteristic
4.2 Tunable Emission of Optical Elastomer Cavities
4.2.1 Incorporation of Organic Laser Dyes in the Elastomer
4.2.2 Tunable Photoluminescence Spectra
4.2.3 Lasing in Elastomer Cavities
5 Novel Architecture for OLEDs at High Excitation
5.1 OLEDs at High Excitations Using Emission from Metal-free Area
5.1.1 Simulation of the Lateral Distribution of the Vertical Current Density
5.1.2 Investigation of the Lateral Emission
5.1.3 Organic Zener Junction
5.1.4 Simulation of High Excitation Behavior
5.2 Reduction of Self-heating for OLEDs at High Excitation
5.2.1 Crossbar-OLED at High Current Densities
5.2.2 Change in Layer Structure
5.3 Fully Transparent Metal-free OLEDs
5.3.1 Highly doped C 60 as a Transparent Electrode
5.3.2 Investigation of the External Quantum Efficiency
6 Conclusion and OutlookInsbesondere durch die wachsende Nachfrage in Point-of-Care-Diagnostik, Sensorik oder optischer Kommunikationstechnologie wird eine große Anzahl von günstigen und kompakten Laserbauteilen benötigt. Aufgrund ihrer spezifischen Eigenschaften, wie hoher optische Verstärkung, niedriger Laserschwelle und spektrale Durchstimmbarkeit, sind organische Festkörperlaser geeignete Kandidaten, um diese Lücke zu schließen. Für die Anwendung als mikrooptische Systeme werden zwei wesentliche Komponenten benötigt: Die spektrale Durchstimmbarkeit sowie das Pumpen des Lasers sollten mit einem einfachen und kompakten Verfahren realisiert werden, im besten Fall durch Anlegen einer elektrischen Spannung. In der vorliegenden Arbeit wurde ein kompakter, elektrisch durchstimmbarer Laserresonator entwickelt, welcher mittels eines dielektrischen Elastomeraktuators in wenigen Prozessschritten realisiert werden kann. Der Resonator besteht aus zwei hochreflektierenden Spiegeln, einem dielektrischen Bragg-Spiegels und einem Metallspiegel, die eine Resonatorschicht aus einem weichen, verformbaren Elastomer umschließen. Für die elektrische Aktuation wird eine Spannung zwischen einer transparenten Bodenelektrode aus Indiumzinnoxid unterhalb des Bragg-Spiegel und der Metallschicht angelegt. Durch die elektrostatische Anziehung beider Elektroden wird die Elastomerschicht zusammengedrückt, wodurch die optischen Moden des Resonators eine Blauverschiebung der Wellenlänge erfahren. Durch die Integration einens Fluoreszenzfarbstoffes mit einem breiten Emissionsspektrum innerhalb der Resonatorschicht, wird die Umsetzung eines elektrisch durchstimmbaren, organischen Festkörperlasers ermöglicht.
Im zweiten Teil der Arbeit wird ein neuartiges Design für organische Leuchtdioden (OLED) vorgestellt, um diese bei hohen Stromdichten zu betreiben und gleichzeitig die optischen Verluste, die beim Einbau in einen optischen Mikroresonator auftreten, zu minimieren. Hierfür wird eine zusätzliche hoch leitfähige, organische Schicht, die laterale Transportschicht, in den Schichtaufbau der OLED integriert. Aufgrund des verstärkten lateralen Ladungsträgertransports wird die Rekombinationszone bis außerhalb der Elektroden bedeckten Fläche ausgeweitet. Mithilfe einer Simulation, welche die organischen Schichten mittels eines Ersatzschaltbildes beschreibt, war es möglich, die laterale Verteilung der vertikalen Stromdichte zu bestimmen und damit Vorhersagen über die Stromdichtenverteilung bei hohen Anregungen (≈ 1 kA/cm² ) zu treffen. Darüber hinaus ermöglicht eine geänderte Schichtreihenfolge der OLED, die Joulesche Erwärmung des Bauteils zu reduzieren. Dadurch ist es möglich, hohe Stromdichten überhalb der vorherge sagten Laserschwelle von 1 kA/cm² zu erreichen. Diese Ergebnisse stellen eine wichtige Voraussetzung für die Entwicklung eines elektrisch gepumpten, organischen Festkörperlasers dar.:1 Introduction
2 Theoretical Background
2.1 Optical Cavities
2.1.1 Fabry-Perot Resonator
2.1.2 Transfer Matrix Algorithm
2.1.3 Distributed Bragg Reflector
2.1.4 Optical Microcavities
2.1.5 Tunable Optical Cavities
2.2 Organic Semiconductors
2.2.1 Properties
2.2.2 Electronic Structure
2.2.3 Absorption and Emission Spectra
2.2.4 Electrical Current
2.2.5 Doping
2.3 Organic Light Emitting Diodes
2.3.1 Basic OLED
2.3.2 Pin-OLED
2.3.3 OLEDs at High Excitation
2.4 Organic Lasers
2.4.1 Fundamentals of a Laser
2.4.2 Organic Molecules as Active Medium
2.4.3 Electrical Pumping of Organic Lasers
2.5 Dielectric Elastomer Actuators
2.5.1 Principle of Operation
2.5.2 Silicone-Based Materials
2.5.3 Compliant Electrodes
3 Experimental Methods
3.1 Sample Fabrication
3.1.1 Dielectric Elastomer Actuators
3.1.2 Organic Light Emitting Diodes
3.2 Characterization Techniques
3.2.1 Optical Characterization
3.2.2 Electrical Characterization
4 Tunable Optical Cavities with Dielectric Elastomer Actuators
4.1 Design of the Tunable Optical Microcavity
4.1.1 Tunable Cavity with Thin Metal Electrode .
4.1.2 Compliant Metal Electrodes on Dielectric Elastomer Films
4.1.3 Actuator Performance of Thick Metal Electrode
4.1.4 Electro-mechanical Characteristic
4.2 Tunable Emission of Optical Elastomer Cavities
4.2.1 Incorporation of Organic Laser Dyes in the Elastomer
4.2.2 Tunable Photoluminescence Spectra
4.2.3 Lasing in Elastomer Cavities
5 Novel Architecture for OLEDs at High Excitation
5.1 OLEDs at High Excitations Using Emission from Metal-free Area
5.1.1 Simulation of the Lateral Distribution of the Vertical Current Density
5.1.2 Investigation of the Lateral Emission
5.1.3 Organic Zener Junction
5.1.4 Simulation of High Excitation Behavior
5.2 Reduction of Self-heating for OLEDs at High Excitation
5.2.1 Crossbar-OLED at High Current Densities
5.2.2 Change in Layer Structure
5.3 Fully Transparent Metal-free OLEDs
5.3.1 Highly doped C 60 as a Transparent Electrode
5.3.2 Investigation of the External Quantum Efficiency
6 Conclusion and Outloo
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
