169,868 research outputs found
Wettability of graphene by molten polymers
No full textGraphene wetting by polymers is a critical issue to both the success of polymer-aided transfer of large size sheets onto specific substrates and to the development of well performing nanocomposites. Here we show for the first time that high temperature contact angle measurements can be performed to investigate the wettability of CVD graphene by molten polymers. In particular, poly(methyl methacrylate), a widely used polymer support for CVD graphene transfer, has been adopted herein for this proof-of-concept study and the values of contact angle and work of adhesion have been provided in the temperature range 170–200 °C
Permeability prediction of non-crimp fabrics based on a geometric model
No full textA model to predict the permeability of Non-Crimp Fabrics is proposed. The model is based on the geometrical features of the fabric. The stitches penetrating the uni-directional plies of the NCF induce distortions in the plane of the fabric. The dimensions of these Stitch Yarn induced fibre Distortions (SYD) are analysed for different fabrics in relaxed and sheared configurations. The length and width of the SYDs are found to be distribution values. The averaged value and the distribution change as the fabric is sheared. The SYDs form flow channels, which determine the permeability of the NCF. The channels are connected to each other in overlap regions, allowing the fluid to flow from one channel to another and finally to impregnate the entire preform. A network of SYD flow channels is modelled to account for the statistical variations in the dimensions of the SYDs. The flow resistance of a single channel is calculated using a multigrid solver. The global flow is calculated by solving the effective resistance of all flow channels. Analysis of different networks, with varying spatial distribution of the dimensions of the flow channels, allows the prediction of the variation in the permeability of an NCF
Shape Memory Composite Sandwich Structures with Self-Healing Properties
No full textIn this study, Polyurea/Formaldehyde (PUF) microcapsules containing Dicyclopentadiene (DCPD) as a healing substance were fabricated in situ and mixed at relatively low concentrations (<2 wt%) with a thermosetting polyurethane (PU) foam used in turn as the core of a sandwich structure. The shape memory (SM) effect depended on the combination of the behavior of the PU foam core and the shape memory polymer composite (SMPC) laminate skins. SMPC laminates were manufactured by moulding commercial carbon fiber-reinforced (CFR) prepregs with a SM polymer interlayer. At first, PU foam samples, with and without microcapsules, were mechanically tested. After, PU foam was inserted into the SMPC sandwich structure. Damage tests were carried out by compression and bending to deform and break the PU foam cells, and then assess the structure self-healing (SH) and recovery capabilities. Both SM and SH responses were rapid and thermally activated (120 °C). The CFR-SMPC skins and the PU foam core enable the sandwich to exhibit excellent SM properties with a shape recovery ratio up to 99% (initial configuration recovery). Moreover, the integration of microcapsules (0.5 wt%) enables SH functionality with a structural restoration up to 98%. This simple process makes this sandwich structure ideal for different industrial applications
A mechanical system for tensile testing of supported films at the nanoscale
No full textStandard tensile tests of materials are usually performed on freestanding specimens. However, such requirement is difficult to implement when the materials of interest are of nanoscopic dimensions due to problems related to their handling and manipulation. In the present paper, a new device is presented for tensile testing of thin nanomaterials, which allows tests to be carried out on specimens initially deposited onto a macroscopic pre-notched substrate. On loading, however, no substrate effects are introduced, allowing the films to be freely stretched. The results obtained from a variety of thin metal or polymeric films are very promising for the further development of this technique as a standard method for nanomaterial mechanical testin
Effective EMI shielding behaviour of thin graphene/PMMA nanolaminates in the THz range
No full textThe use of graphene in a form of discontinuous flakes in polymer composites limits the full exploitation of the unique properties of graphene, thus requiring high filler loadings for achieving- for example- satisfactory electrical and mechanical properties. Herein centimetre-scale CVD graphene/polymer nanolaminates have been produced by using an iterative ‘lift-off/float-on’ process and have been found to outperform, for the same graphene content, state-of-the-art flake-based graphene polymer composites in terms of mechanical reinforcement and electrical properties. Most importantly these thin laminate materials show a high electromagnetic interference (EMI) shielding effectiveness, reaching 60 dB for a small thickness of 33 μm, and an absolute EMI shielding effectiveness close to 3·105 dB cm2 g−1 which is amongst the highest values for synthetic, non-metallic materials produced to date
Chemical Vapour Deposition Graphene–PMMA Nanolaminates for Flexible Gas Barrier
No full textSuccessful ways of fully exploiting the excellent structural and multifunctional performance of graphene and related materials are of great scientific and technological interest. New opportunities are provided by the fabrication of a novel class of nanocomposites with a nanolaminate architecture. In this work, by using the iterative lift-off/float-on process combined with wet depositions, we incorporated cm-size graphene monolayers produced via Chemical Vapour Deposition into a poly (methyl methacrylate) (PMMA) matrix with a controlled, alternate-layered structure. The produced nanolaminate shows a significant improvement in mechanical properties, with enhanced stiffness, strength and toughness, with the addition of only 0.06 vol% of graphene. Furthermore, oxygen and carbon dioxide permeability measurements performed at different relative humidity levels, reveal that the addition of graphene leads to significant reduction of permeability, compared to neat PMMA. Overall, we demonstrate that the produced graphene–PMMA nanolaminate surpasses, in terms of gas barrier properties, the traditional discontinuous graphene–particle composites with a similar filler content. Moreover, we found that the gas permeability through the nanocomposites departs from a monotonic decrease as a function of relative humidity, which is instead evident in the case of the pure PMMA nanolaminate. This work suggests the possible use of Chemical Vapour Deposition graphene–polymer nanolaminates as a flexible gas barrier, thus enlarging the spectrum of applications for this novel material
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Assessing micromechanical behaviour of PET cords in rubber matrix composites by laser Raman microscopy
No full textThe mechanical behaviour of PET cord-rubber composites has been investigated by adopting a multi-scale approach by combining standard tensile testing and laser Raman microscopy (LRM). Tensile tests were performed on cord-rubber composite and on its constituents to gain information on the mechanical response at the macro-scale. The behaviour at smaller scales was assessed by means of LRM, which has already been established as a technique that can yield values of stress or strain of reinforcement at the micro-scale. The effects of cord content, composite configuration and sample length have been examined. In particular, the efficiency of stress/ strain transfer to the embedded cord has been evaluated and correlated to the micromechanical behaviour through the ‘finite fibre length effect’ observed at the macro-scale
THz EMI Shielding in Graphene/PMMA Multilayers
No full textThe electromagnetic interference (EMI) shielding mechanisms of graphene/PMMA multilayered structures are experimentally investigated by using time domain spectroscopy (TDS) in the THz range. Stacked plates of similar thickness ( 5μm), starting from a single layer up to 100 layers, were produced by a novel approach combining ultra-thin polymer casting and wet deposition techniques. These nano laminates show enhanced electrical conductivity (100 S/cm) and superior specific shielding effectiveness (2.104 dB cm2 g-1)
- …
