42 research outputs found
RD53 Collaboration and CHIPIX65 Project for the development of an innovative Pixel Front End Chip for HL-LHC
Full text linkBulk damage in proton irradiated JFET transistors and charge preamplifiers on high resistivity silicon
No full textNovel active signal compression in low-noise analog readout at future X-ray FEL facilities
No full textThis work presents the design of a low-noise front-end implementing a novel active signal compression technique. This feature can be exploited in the design of analog readout channels for application to the next generation free electron laser (FEL) experiments. The readout architecture includes the low-noise charge sensitive amplifier (CSA) with dynamic signal compression, a time variant shaper used to process the signal at the preamplifier output and a 10-bit successive approximation register (SAR) analog-to-digital converter (ADC). The channel will be operated in such a way to cope with the high frame rate (exceeding 1 MHz) foreseen for future XFEL machines. The choice of a 65 nm CMOS technology has been made in order to include all the building blocks in the target pixel pitch of 100 mu m. This work has been carried out in the frame of the PixFEL Project funded by the Istituto Nazionale di Fisica Nucleare (INFN), Italy
First measurements of a prototype of a new generation pixel readout ASIC in 65 nm CMOS for extreme rate HEP detectors at HL-LHC
No full textA first prototype of a readout ASIC in CMOS 65 nm for a pixel detector at High Luminosity LHC is described. The pixel cell area is 50x50 μm^2 and the matrix consists of 64x64 pixels. The chip was designed to guarantee high efficiency at extreme data rates for very low signals and with low power consumption. Two different analogue front-end designs, one synchronous and one asynchronous, were implemented, both occupying an area of 35x35 μm^2. ENC value is below 100 e- for an input capacitance of 50 fF and in-time threshold below 1000 e-. Leakage current compensation up to 50 nA with power consumption below 5 μW. A ToT technique is used to perform charge digitization with 5-bit precision using either a 40 MHz clock or a local Fast Oscillator up to 800 MHz. Internal 10-bit DAC's are used for biasing, while monitoring is provided by a 12-bit ADC. A novel digital architecture has been developed to ensure above 99.5% hit efficiency at pixel hit rates up to 3 GHz/cm2, trigger rates up to 1 MHz and trigger latency of 12.5 μs. The total power consumption per pixel is below 5 μW. Analogue dead-time is below 1%. Data are sent via a serializer connected to a CMOS-to-SLVS transmitter working at 320 MHz. All IP-blocks and front-ends used are silicon-proven and tested after exposure to ionizing radiation levels of 500-800 Mrad. The chip was designed as part of the Italian INFN CHIPIX65 project and in close synergy with the international CERN RD53 and was submitted in July 2016 for production. Early test results for both front-ends regarding minimum threshold, auto-zeroing and low-noise performance are high encouraging and will be presented in this paper
CHIPIX65: Developments on a new generation pixel readout ASIC in CMOS 65 nm for HEP experiments
No full textPixel detectors at HL-LHC experiments or other future experiments are facing new challenges, especially in terms of unprecedented levels of radiation and particle flux. This paper describes the progress made by the CHIPIX65 project of INFN for the development of a new generation readout ASIC using CMOS 65 nm technology
Results from CHIPIX-FE0, a small-scale prototype of a new generation pixel readout ASIC in 65 nm CMOS for HL-LHC
Full text linkA prototype of a new-generation readout ASIC targeting High-Luminosity (HL) LHC pixel detector upgrades has been designed and fabricated as part of the Italian INFN CHIPIX65 project using a commercial 65 nm CMOS technology. This demonstrator, hereinafter referred to as CHIPIX-FE0, is composed of a matrix of 64 × 64 pixels with 50 μm × 50 μm pixel size embedding two different architectures of analog front-ends working in parallel. The final layout of the chip was submitted and accepted for fabrication on July 2016. Chips were received back from the foundry on October 2016 and successfully characterized before irradiation. Several irradiation campaigns with X-rays have been accomplished during 2017 at Padova INFN and CERN EP/ESE facilities under different uniformity and temperature conditions up to 630 Mrad Total Ionizing Dose (TID). These studies corfirmed negligible degradation of analog front-ends performance after irradiation. First sample chips have been also bump-bonded to 50 μm × 50 μm and single readout electrode 25 μm × 100 μm 3D sensors provided by Trento FBK. This represented a major milestone for the entire CHIPIX65 project, offering to the pixel community the first example of a complete readout chip in 65 nm CMOS technology coupled to such a kind of silicon detectors. Extensive characterizations with laser and radioactive sources have started. This paper briefly summarizes most important pre- and post-irradiation results, along with preliminary results obtained from chips bump-bonded to 3D sensors. Selected components of the CHIPIX65 demonstrator have been finally integrated into the large-scale RD53A prototype submitted at the end of summer 2017 by the CERN RD53 international collaboration on 65 nm CMOS technology
RD53 Collaboration and CHIPIX65 Project for the development of an innovative Pixel Front End Chip for HL-LHC
Full text linkPixel detectors at HL-LHC experiments will be exposed to unprecedented level of radiation and particle flux. This paper describes the program of development of an innovative pixel chip using a CMOS 65nm technology for the first time in HEP community, for experiments with extreme particle rates and radiation at future High Energy Physics colliders. The RD53 collaboration effort is described together with the CHIPIX65 INFN project
A Prototype of a new generation readout ASIC in 65 nm CMOS for pixel detectors at HL-LHC
Full text linkThe foreseen High-Luminosity upgrade at the CERN Large Hadron Collider (LHC) will constitute a new frontier for particle physics after year 2024, demanding for the installation of new silicon pixel detectors able to withstand unprecedented track densities and radiation levels in the inner tracking systems of current general-purpose experiments. This paper describes the implementation of a new-generation pixel chip demonstrator using a commercial 65 nm CMOS technology and targeting HL-LHC specifications. It was designed as part of the Italian INFN CHIPIX65 project and in close synergy with the international CERN RD53 collaboration on 65 nm CMOS. The prototype is composed of a matrix of 64×64 pixels with 50 μm × 50 μm cells featuring a compact design, low-noise and low-power performance. The pixel array integrates two different analogue front-end architectures working in parallel, one with asynchronous and one with synchronous hit discriminators. Common characteristics are a compact layout able to fit into half the pixel size, low-noise performance (ENC < 100 e- RMS for 50 fF input capacitance), below 5 μW/pixel power consumption, linear charge measurements up to 30 ke- input charge using Time-over-Threshold (ToT) encoding and leakage current compensation up to 50 nA per pixel. A novel region-based digital architecture has been designed in order to ensure > 99% efficiency for expected 3 GHz/cm2 hit rate, 1 MHz trigger rate and 12.5 μs trigger latency at HL-LHC. Pixels have been organized into regions of 4×4 cells and a common synthesized logic shared among all pixels provides a centralized memory for latency buffering, performs the trigger matching and handles the local configuration. The simulated particle inefficiency for this architecture is below 0.1% under nominal HL-LHC conditions. All global biases and voltages required by analogue front-ends are generated on-chip using 10-bit programmable DACs. Bias currents and voltages can be monitored by a 12-bit ADC. A bandgap voltage reference circuit provides a stable reference voltage for all these blocks. The readout of triggered data is based on replicated FIFOs placed at the chip periphery. Data are finally sent off-chip with 8b/10b encoding using a high-speed serializer. Triggerless and debug operating modes are also supported. Chip configuration and slow-control are performed through fully-duplex synchronous Serial Peripheral Interface (SPI) master/slave transactions. The digital I/O interface uses custom-designed JEDEC-compliant SLVS transmitters and receivers. All blocks and analogue front-ends have been silicon-proven during a previous prototyping phase and were demonstrated to be radiation tolerant up to 580 Mrad Total Ionizing Dose (TID) or beyond. The CHIPIX65 demonstrator was submitted for fabrication on July 2016. It was received back from the foundry on October 2016 and preliminary experimental characterizations started
Design of analog front-ends for the RD53 demonstrator chip
Full text linkThe RD53 collaboration is developing a large scale pixel front-end chip, which will be a tool to evaluate the performance of 65 nm CMOS technology in view of its application to the readout of the innermost detector layers of ATLAS and CMS at the HL-LHC. Experimental results of the characterization of small prototypes will be discussed in the frame of the design work that is currently leading to the development of the large scale demonstrator chip RD53A to be submitted in early 2017. The paper is focused on the analog processors developed in the framework of the RD53 collaboration, including three time over threshold front-ends, designed by INFN Torino and Pavia, University of Bergamo and LBNL and a zero dead time front-end based on flash ADC designed by a joint collaboration between the Fermilab and INFN. The paper will also discuss the radiation tolerance features of the front-end channels, which were exposed to up to 800 Mrad of total ionizing dose to reproduce the system operation in the actual experiment
The SuperB silicon vertex tracker
No full textThe SuperB asymmetric e+e− collider, to be built near the INFN National Frascati Laboratory in Italy, has been designed to deliver a luminosity greater than 1036 cm−2 s−1 with moderate beam currents, allowing precision measurements in the flavour sector sensitive to New Physics. The conceptual design of the Silicon Vertex Tracker for the SuperB Detector is presented, based on double-sided silicon strip detectors for the outer layers, with the addition of an innermost Layer 0 close to the interaction point, with low material budget and capable of sustaining a background rate of several MHz/cm2
