1,720,972 research outputs found
Using Optimization's Algorithms by Designing of Structures
No full textThe application of optimization algorithms in the design of many economical and industrial problems currently represents a significant assignment. The development of high-powered computers allows an application of difficult mathematical techniques and physical phenomena to simulate real problems with sufficient accuracy. The optimization techniques used in engineering designs are mostly represented by modified mathematical programming methods with extension of their usability. The aim of the presented thesis "Using Optimization´s Algorithms by Designing of Structures" is to analyze the applicability of optimization procedures which are available in the widely used computing system ANSYS in civil and mechanical engineering practice. The numerical analyses were performed within the frame of multi-extreme, one to three dimensional optimization problems, multi-dimensional problems expressed by minimizing the weight of a truss beam and efficient design of air gap location in wooden studs from the point of view of thermal features of the structure. The analyzed optimization processes are in plurality verified with accurate manual computing and graphical solutions and the accent is put on optimization methods´ possibilities to improve robustness, efficiency and accuracy of the optimization algorithms in civil engineering problems´ designs. The optimization methods represent a suitable approach to improve the efficient design of a wide range of civil and mechanical engineering structures and elements. By combination of their advantages and FEM/FEA method it is possible to achieve very good results, although robustness of the solutions is not guaranteed. The robustness and accuracy of the procedure could be increased by competent exploration of design space and suitable selections of optimization methods´ features
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Using Optimization's Algorithms by Designing of Structures
No full textThe application of optimization algorithms in the design of many economical and industrial problems currently represents a significant assignment. The development of high-powered computers allows an application of difficult mathematical techniques and physical phenomena to simulate real problems with sufficient accuracy. The optimization techniques used in engineering designs are mostly represented by modified mathematical programming methods with extension of their usability. The aim of the presented thesis "Using Optimization´s Algorithms by Designing of Structures" is to analyze the applicability of optimization procedures which are available in the widely used computing system ANSYS in civil and mechanical engineering practice. The numerical analyses were performed within the frame of multi-extreme, one to three dimensional optimization problems, multi-dimensional problems expressed by minimizing the weight of a truss beam and efficient design of air gap location in wooden studs from the point of view of thermal features of the structure. The analyzed optimization processes are in plurality verified with accurate manual computing and graphical solutions and the accent is put on optimization methods´ possibilities to improve robustness, efficiency and accuracy of the optimization algorithms in civil engineering problems´ designs. The optimization methods represent a suitable approach to improve the efficient design of a wide range of civil and mechanical engineering structures and elements. By combination of their advantages and FEM/FEA method it is possible to achieve very good results, although robustness of the solutions is not guaranteed. The robustness and accuracy of the procedure could be increased by competent exploration of design space and suitable selections of optimization methods´ features
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
HAM and mould growth analysis of a wooden wall
No full textAbstractThe aim of engineers is to design structures, while minimising their energy dependence and create a suitable environment for living. Some of the most important factors for maintaining the indoor environment are temperature and humidity. Unsuitable combinations of heat and moisture (HAM) could indicate a danger of mould growing. The mould’s existence influences the reliability and lifespan of a structure. Some materials, for example wood, are very sensitive to mould growth. To analyse a structure for mould growth risk it is necessary to know the values of temperature and relative humidity on the surfaces and inside of structures. There are two possibilities to acquire these quantities; taking measurements at a construction site or in a laboratory, or applying numerical solutions using an accessible programme. One such programme is Wufi, which has been developed especially for HAM analysis. An advantage of measuring at the construction site is the reality, which is not affected by numerical errors. On the other hand, numerical analysis usually needs lower costs and does not demand so much time to simulate long term periods. From the point of view of accuracy, it is suitable to verify the numerical solution with measurements. The aim of this paper is threefold. First, to analyse the risk of mould growth. Second, it presents a verification of numerically calculated data using Wufi 2D against actual measurement data acquired from a real structure, which is presented by a low-energy house located in Oulu/Finland. Third, to prove that the form of low-energy building structures do not increase mould growth risk. After carrying out the verification, the received outcomes are utilised for mould growth analysis. For an expression of reality in the numerical solution, a transient simulation was needed. The received outcomes were then used for mould growth analyses. There is a possibility to predict real mould growth risk inside the structure and on its surfaces, corresponding to the critical relation between temperature and relative humidity, which separates favourable and unfavourable areas for mould growth
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
