1,720,988 research outputs found
Can TKA design affect the clinical outcome? Comparison between two guided-motion systems.
No full textIn a retrospective comparative analysis in patients undergoing primary guided-motion total knee arthroplasty (TKA), the authors have evaluated whether different TKA implant design would influence the clinical and functional outcomes.
METHODS:
Between 2007 and 2009, 227 computer-assisted primary TKAs were performed in 219 consecutive patients. Patients received one of the two different fixed-bearing guided-motion TKA designs assisted by navigation surgery: the Scorpio Non-Restrictive Geometry (NRG) knee system and the Journey Bi-Cruciate Stabilized (BCS) knee systems.
RESULTS:
Data were available for 180 patients (187 knees). No significant differences were observed between the two groups with respect to preoperative demographic characteristics, range of motion (ROM) and radiographic knee alignment. At a mean follow-up of 29 months, the Journey BCS group had higher mean Knee Injury and Osteoarthritis Outcome Score (KOOS) in all subscales and a greater ROM than the Scorpio NRG group. This difference was statistically significant for the KOOS subscales of pain (p = 0.007) and knee-related quality of life (p = 0.045), as well as for postoperative ROM (p = 0.018). Considering the overall complications, 1 patient of Scorpio NRG group (0.5%) and 5 in Journey BCS (2.7%) had stiffness. Anterior knee pain was reported in 4 cases of Scorpio NRG group (2.1%). In the Journey BCS group were observed 2 cases (1.1%) of frontal plane instability and 1 case (0.5%) of synovitis pain.
CONCLUSIONS:
The bearing geometry and kinematic pattern of different guided-motion prosthetic designs can affect the clinical-functional outcome and complications type in primary TKA.
LEVEL OF EVIDENCE:
Clinical study, Level III
Navigation-assisted total knee arthroplasty in knees with osteoarthritis due to extra-articular deformity.
No full textPURPOSE:
Extra-articular post-traumatic deformity may make difficult the implantation of total knee arthroplasty (TKA). Staged surgical procedures, including femoral or tibial osteotomy, can be required to restore proper alignment. These procedures may be inappropriate because of high rate of complications. Intra-articular resection is an alternative procedure, but it is limited by the potential compromise of collateral knee ligaments. Conventional instrumentation cannot be used in patients with previous trauma and residual bone deformity. We want to assess whether computer-assisted surgery may be a good alternative to traditional techniques.
METHODS:
Twenty consecutive TKAs were performed in 20 patients (12 men and 8 women) with knee arthritis due to extra-articular deformity. The mean age was 52 years. According to Moreland method, the mean (± standard deviation) of the pre-operative hip-knee-ankle angle was 10.4° ± 8.3° in varus. In all cases, an image-free knee navigation system was used because of the severe deformity or the presence of retained hardware that prevented the use of the intramedullary rod. The average follow-up was 3.1 years.
RESULTS:
One month after surgery, the mean hip-knee-ankle angle was 0.8° ± 1.2° in varus. At follow-up, the Knee Society Score increased from an average of 48 pre-operatively to 91 (P < 0.05) post-operatively, with over 90% of excellent and good results. Mean range of motion improved from a 7°-74° mean range pre-operatively to 0°-94° post-operatively.
CONCLUSIONS:
The general value of navigation systems in achieving accurate bone cuts and restoring the mechanical axis has been established in the literature for standard TKA but not yet for extra-articular deformity. Our findings at mid-term follow-up on a large cohort of these patients showed that these systems used for intra-articular resection are a very effective alternative to previous techniques
Early migration of the cemented tibial component of unicompartmental knee arthroplasty: a radiostereometry study.
No full textPurpose: Unicompartmental knee arthroplasty has good clinical results but high revision rates. A unicompartmental knee arthroplasty design features an all-polyethylene and conforming tibial component, and we hypothesized that this may put at risk its fixation. Implant-to-bone micromotion was measured together with relevant clinical outcomes. Methods: The migration of the tibial component in twenty patients was measured at 3, 6, 12 and 24 months, using standard radiostereometry, along with the relevant clinical outcomes using the IKS scoring system. Results: The eighteen arthroplasties at 24 months were found successful, with very good functional (mean 87.7; SD 15.4) and knee scores (mean 94.8; SD 10.1). The means and the standard deviations of the maximum total point motion (MTPM) for the four follow-ups were, respectively, as small as 0.4 ± 0.1 mm, 0.6 ± 0.2 mm, 0.6 ± 0.3 mm and 0.7 ± 0.3 mm, an average over all patients but one. In this knee, these were 1.6, 2.1, 2.4 and 2.2 mm, therefore not at high risk of aseptic loosening according to the literature. Only one knee was found at this risk, having the MTPM from 12 to 24 months of 0.5 mm, and the component moving and sinking medially, and rising laterally. Conclusion: At 2-year follow-up, a successful implant-to-bone fixation can be achieved in conforming all-polyethylene cemented tibial component together with excellent clinical outcomes. Level of evidence: Prognostic studies, Level
Prognostic factors in lower limb joint arthroplasty
No full textA study was carried out to determine the influence of prosthesis design on fixation and to detect patients at high risk of mechanical aseptic loosening. The migration of implant in-vivo was quantified. Subsidence of hip arthroplasty was not found while the greater displacement was found in the tip of the stem
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Does component placement affect short-term clinical outcome in robotic-arm assisted unicompartmental knee arthroplasty?
Full text linkAims The purpose of this multicentre observational study was to investigate the association between intraoperative component positioning and soft-tissue balancing on short-term clinical outcomes in patients undergoing robotic-arm assisted unicompartmental knee arthroplasty (UKA). Patients and Methods Between 2013 and 2016, 363 patients (395 knees) underwent robotic-arm assisted UKAs at two centres. Pre- and postoperatively, patients were administered Knee Injury and Osteoarthritis Score (KOOS) and Forgotten Joint Score-12 (FJS-12). Results were stratified as “good” and “bad” if KOOS/FJS-12 were more than or equal to 80. Intraoperative, post-implantation robotic data relative to CT-based components placement were collected and classified. Postoperative complications were recorded. Results Following exclusions and losses to follow-up, 334 medial robotic-arm assisted UKAs were assessed at a mean follow-up of 30.0 months (8.0 to 54.9). None of the measured parameters were associated with overall KOOS outcome. Correlations were described between specific KOOS subscales and intraoperative, post-implantation robotic data, and between FJS-12 and femoral component sagittal alignment. Three UKAs were revised, resulting in 99.0% survival at two years (95% confidence interval (CI) 97.9 to 100.0). Conclusion Although little correlation was found between intraoperative robotic data and overall clinical outcome, surgeons should consider information regarding 3D component placement and soft-tissue balancing to improve patient satisfaction. Reproducible and precise placement of components has been confirmed as essential for satisfactory clinical outcome
- …
