1,720,957 research outputs found
Effect of triphenylsulfonium triflate addition in wide band-gap polymer light-emitting diodes: improved charge injection, transport and electroplex-induced emission tuning
No full textThe presence of mobile anions in the emitting layer of polymer-based OLEDs has been proven to influence substantially the injection characteristics of the diode. In this work we report on the improvement of both injection and transport of charge carriers in blue emitting poly[2-(6-cyano-6-methyl-heptyloxy)-1,4- phenylene] (CN-PPP) based OLEDs upon insertion of the all-organic triphenylsulfonium (TPS) triflate salt in the emitting layer. On one hand, the anion displacement influences the energetics at the polymer/anode interface facilitating hole injection, whereas, on the other hand, the triphenylsulfonium cations act as electron transporting sites. The OLEDs exhibit significantly reduced turn-on voltage to half their initial value and increased luminance at low operating voltage. Moreover, the large energetic mismatch of the polymer and the triphenylsulfonium salt as well as the polarity induced by the ions result in simultaneous dual emission originating from the polymer exciton and from an electroplex, which is proposed to be formed at the triphenylsulfonium salt/polymer interfaces in the bulk. These results show that triphenylsulfonium salts represent an attractive class of materials that can be blended with conjugated polymers and can modify their electrical and/or emissive characteristics.</p
Influence of the anion on the optoelectronic characteristics of triphenylsulfonium salts modified polymer light emitting devices
No full textTriphenylsulfonium salts addition in the emitting layer of polymer light emitting diodes (PLEDs) has been shown to be beneficial for charge injection and transport due to both ionic effects and π-conjugation in the phenyl rings of the cation. In some cases the emission profile can be also modified through an electroplex formation. Herein we investigate the effect of four TPS-salts with different counter anions on the overall PLED performance upon blending each salt with the conjugated polymer poly[2-(6-cyano-6-methyl-heptyloxy)-1,4-phenylene] (CN-PPP). In particular, three perfluoroalkanesulfonate organic anions of increasing size (triflate, nonaflate, PFOS) and a perfluorinated inorganic anion (SbF6) are compared. It is shown that the anion size affects primarily the turn-on and operational voltage, whereas its chemical nature is crucial for achieving high luminance values. The counteranion exerts also a direct impact on the dispersion properties of the salt in the polymer matrix, and thus, the film morphology, which in turn influences the emission colour and efficiency of an electroplex that is proposed to be formed at the sulfonium salt/polymer interfaces in the bulk. This study highlights the importance of properly selecting the counterions of the salts added in the emitting layer of PLEDs, which, in addition to their various functionalities, significantly influence device performance.</p
Incorporating triphenyl sulfonium salts in polyfluorene PLEDs: An all-organic approach to improved charge injection
No full textAll-organic sulfonium salts are introduced as a class of ionic compounds that show high compatibility with conjugated polymers and may form blends with attractive luminescent properties leading to significant improvement in single-layer polymer light emitting diodes' (PLEDs') performance. We demonstrate that triphenylsulfonium (TPS) triflate:polyfluorene-co-benzothiadiazole (F8BT)-blend based PLEDs show a lower turn-on voltage, an increased luminous efficiency and higher peak luminance values. These results are being rationalized in terms of anionic accumulation and space charge formation at the anode side, which facilitates hole injection, leading to more balanced injection and subsequently to a higher recombination rate. Moreover, we find that the salt anion size plays a critical role in the device operating characteristics. The judicious choice of both the salt and the emitting polymer by considering relative energy level alignment, salt electrochemical stability and acquired thermodynamic stability of blend morphology is important for the achievement of high performance PLEDs without requiring elaborate device architectures.</p
All-organic sulfonium salts acting as efficient solution processed electron injection layer for PLEDs
No full textHerein we introduce the all-organic triphenylsulfonium (TPS) salts cathode interfacial layers (CILs), deposited from their methanolic solution, as a new simple strategy for circumventing the use of unstable low work function metals and obtaining charge balance and high electroluminescence efficiency in polymer light-emitting diodes (PLEDs). In particular, we show that the incorporation of TPS-triflate or TPS-nonaflate at the polymer/Al interface improved substantially the luminous efficiency of the device (from 2.4 to 7.9 cd/A) and reduced the turn-on and operating voltage, whereas an up to 4-fold increase in brightness (∼11 250 cd/m2 for TPS-triflate and ∼14 682 cd/m2 for TPS-nonaflate compared to ∼3221 cd/m2 for the reference device) was observed in poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-2, 1′,3-thiadiazole)] (F8BT)-based PLEDs. This was mainly attributed to the favorable decrease of the electron injection barrier, as derived from the open-circuit voltage (Voc) measurements, which was also assisted by the conduction of electrons through the triphenylsulfonium salt sites. Density functional theory calculations indicated that the total energy of the anionic (reduced) form of the salt, that is, upon placing an electron to its lowest unoccupied molecular orbital, is lower than its neutral state, rendering the TPS-salts stable upon electron transfer in the solid state. Finally, the morphology optimization of the TPS-salt interlayer through controlling the processing parameters was found to be critical for achieving efficient electron injection and transport at the respective interfaces.</p
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
