1,720,959 research outputs found
Development of a Solution Method to Promote Proper Bandaging Techniques for Transfemoral Amputees
Get PDFPost-operative care for lower limb amputees focuses on reducing swelling and promoting healing of the residual limb. Healing and desired residual limb maturation is necessary to achieve a conical shape suitable for prosthesis integration. Elastic bandaging is applied to the residual limb to achieve this conical shape. Bandaging requires skill and frequent reapplication. In many cases, the amputee is unable to bandage the residual limb effectively following surgery and professional assistance may not be readily available, increasing the risk of permanent damage due to improper bandaging. Transfemoral amputees are often confined to a wheelchair and spend the most time without a prosthesis fitted compared to any other lower limb amputee. An effective method in achieving the optimum residual limb shape, while promoting proper bandaging is therefore required. The aim of this study was to develop a solution method to assist transfemoral amputees with proper bandaging to achieve a shorter healing period and promote faster prosthesis integration through residual limb re-shaping. An overall solution method comprising of three sub-systems was designed to instruct bandaging. This included the development of a bandaging template, a mobile application and an elastic bandage dispenser. A printable bandaging template generated by a Python script based on the measurements of the patient's residual limb circumferences was developed to instruct bandaging. Development of a mobile application allowed for the design of an interface to control the dispensing device and instruct bandaging steps. The developed Bandage Utility Dispenser (BUD) transmits unrolled bandage length measurements to the mobile application using Bluetooth, to meet the target bandage lengths. Target bandage lengths are calculated by a second Python script to recommend sufficient bandage lengths. Target bandage lengths are expected to apply adequate pressure, while covering the exposed area of the residual limb for the current bandaging step. Testing occurred on an anatomically correct residual limb model (ACM) and five constructed models (CM) assembled by altering proximal and distal ACM circumferential measurements in increments of 5 cm. Measurement and pressure testing were performed after successfully validating the use of the CMs using a Bland-Altman analysis on the ACM and a CM of equal dimensions. Measurement testing utilised a chi-square goodness of fit test to compare observed and expected bandage length measurements for each model. Results for all models indicated that observed and expected measurements did not differ significantly. Pressure testing was performed by measuring the pressure application along the perimeter of the models with assembled pressure pads. Readings were analysed using a one sample t-test to compare differences between sample means and the recommended pressure application from literature. Testing results indicated that pressure application for five of the six models were in an acceptable range. Future recommendations have been established to potentially improve design, functionality and testing of the current iteration of the BUD solution method
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Design and Development Towards a Novel Prosthesis for Total Shoulder Arthroplasty to Reduce Aseptic Glenoid Loosening
Get PDFTotal shoulder arthroplasty (TSA) is the most common surgical solution, that helps in restoring the structural and functional integrity of a diseased glenohumeral (GH) joint with intact rotator-cuff. A 300% increase in the usage of TSA has been observed since 2007, along with 2.5% increase in revision rate. Aseptic glenoid loosening accounts for 37% of postsurgical failures in TSA. Eccentric loading of the prosthetic glenoid cup, leading to the “rocking horse” effect, is one of the prevalent causes of aseptic glenoid loosening. Current anatomical total shoulder prosthesis (ATSP) geometry does not consider all the GH morphometric features, for example the elliptical shape of the humeral head. Moreover, the morphometric studies leading to the initial ATSP design did not consider the GH morphology of any sub-Saharan population. Hence, there exists a gap in understanding of the implications of certain morphometric features on the functionality of a post-TSA GH joint. This thesis had two primary aims to address this gap in knowledge. Firstly, to study the GH morphometric variations between cohorts representing native European (Swiss) and native sub-Saharan (South African) populations. Secondly, to develop anatomically inspired ATSP design concepts and test them using biomechanical and finite element (FE) models, insilico, under standardised testing protocols. The morphometric analysis suggested that an average Swiss humeral head radius of curvature was larger (P28mm or <19mm. Considering both the populations, the inherent shape of an average humeral head was found to be elliptical. The thickest region of the head was found to lie in the posterior region and not at the geometric center. Hertzian contact theory was applied to calculate the GH stresses produced by symmetric and asymmetric elliptical heads. Higher concentric stresses (P<0.001), within the acceptable limit for polyethylene, were observed to be imparted by the asymmetric heads. Population-specific musculoskeletal models were developed to study the post-TSA kinematic variation. When an identical range of motion (RoM) was performed by these models, population-specific variation in muscle moment arms was observed. The novel glenoid designs were not found to alter the post-surgical kinematics. FE models of the biradial, compartmental and pear-shaped glenoid implant designs were subjected to compressive and shear loading according to the American Society for Testing and Materials (ASTM). Using the bi-radial the glenoid cup, with thickened posterior-superior surface, anatomically relevant force distribution patterns could be replicated. Compartmentalising the glenoid prosthesis into concentric and eccentric regions with the gaps, proved to be highly beneficial. When compared to a commercially available glenoid prosthesis, the compartmental prosthesis was able to contain the GH forces to the concentric region for longer, delaying the eccentric loading and therefore potentially reducing the “rocking horse” effect. In the light of the above observations, two conclusions can be drawn from this thesis. Firstly, it would be beneficial if population-specific ATSP were made available for natives of certain geographic locations. Secondly, glenoid prosthesis designs could be compartmentalised to contain the GH joint forces within the concentric regions of the cup which might aid in the reduction of post-TSA complications
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
- …
