1,721,027 research outputs found
Adsorption of aromatic sulfur compounds on metal-organic frameworks (MOFs)
No full textLarge-ring aromatic sulfur compounds, e.g., benzothiophene (BT), dibenzothiophene (DBT), present in petroleum and liquid fuels are harmful to human health and the environment. These compounds cause acid rain due to SO2 formation upon combustion of liquid fossil fuels. We studied the use of Metal Organic Frameworks (MOFs), e.g., Cu-MOF Basolite C300, to remove aromatic sulfur compounds from model liquid fossil fuels selective way and in a non-destructive fashion. The kinetics of adsorption of aromatic sulfur compounds on Cupper-MOF (Cu-MOF) was investigated under ambient conditions. The adsorption capacity of Cu-MOF with respect to large-ring aromatic sulfur compounds was examined under thermodynamic equilibrium at different temperatures. The chemical analysis of the liquid phase was performed by UV/VIS spectroscopy (quantitative determination) and high performance liquid chromatography HPLC (qualitative chemical analysis). Quantum chemical simulations of the structure of the aromatic sulfur compound DBT and its molecular spectra were conducted. Evidence of molecular interaction between MOFs and aromatic sulfur compounds was shown by fluorescence spectroscopy.M.S.Includes bibliographical referencesby Muslum Demi
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
RENEWABLE CARBON FROM LIGNIN BIOMASS AND ITS ELECTRODE AND CATALYST APPLICATIONS IN BATTERIES, SUPERCAPACITORS, AND FUEL CELLS
Get PDFOver the last century, almost all of the carbon materials developed for the energy industry are derived from fossil fuels. The growing global concerns about energy needs, fossil fuels consumption, and the related environmental issues have motived scientists to find new, green and sustainable energy resources such as the wind, solar and biomass energy. Essentially, biomass-derived materials can be utilized in energy storage and conversion devices such as Li-ion batteries, fuel cells, and supercapacitors. Among the biomass resources, lignin is a high volume byproduct from the pulp and paper industry and is currently burned to generate electricity and steam. The pulp and paper industry has been searching for high value-added uses of lignin to improve its overall process economics.
The importance of manufacturing valuable materials from lignin is, discussed in Chapter 2, demonstrating the need for a facile, green and scalable approach to synthesize bio-char and porous carbon for use in Li-ion batteries. From this context, lignin is first carbonized in water at 300 °C and 103 bar to produce bio-char, which is then graphitized using a metal nitrate catalyst at 900-1100 °C in an inert gas at 1 bar. Graphitization effectiveness of three different catalysts, iron, cobalt and manganese nitrates was examined. The obtained materials were analyzed for morphology, thermal stability, surface properties, and electrical conductivity. Both annealing temperature and the catalyst affects the degree of graphitization. High-quality graphitization is obtained by using Mn(NO3)2 at 900 °C or Co(NO3)2 catalysts at 1100 °C.
Research on various energy storage materials for supercapacitors has grown rapidly in the recent years. Various advanced materials have been shown as a promising candidate for future’s high-energy supercapacitor electrodes. For a material in a supercapacitor electrode to be considered, it must show promising results for its specific power and energy density, electrical conductivity, surface properties, durability, surface area and pore-size distribution in order to design and develop high-performance supercapacitor devices. The industrial applications of supercapacitors have not been satisfied due to the low energy density (the commercially available supercapacitors have between 5 to 10 times less energy density than that of batteries) and moderate charge-discharge rate of supercapacitor electrode. Thus, chapter 3 was aimed to design and synthesize nitrogen-doped carbon materials that show the characteristic of high-energy and high-power density supercapacitor electrodes with a long cycle life. With this aim, organosol lignin was successfully converted into N-doped carbon materials using a two-step conversion process. The nitrogen content in the carbon was up to 5.6 wt.%. The synthesize materials exhibit high surface area up to 2957 m2/g with micro/meso porosity and a sheet-like structure. The N-doped carbon produced at 850 oC exhibited a high capacitance value of 440 F g-1 at a 1 mV s-1 scan rate and demonstrated excellent cyclic stability over 30,000 cycles in 1 M KOH. In addition, the NC-850 delivers a high energy density of 15.3 W h kg-1 and power density of 55.1 W kg−1 at 1 mV s-1. Therefore, this study suggests that N-doped carbon materials synthesized from a pulp and paper byproduct, lignin, are promising environmentally-sustainable candidates for supercapacitor applications.
Challenges for commercialization of fuel cells include high operation cost, inadequate operational stability, and poisoning by H2O2. To address the challenge, costly Pt-based catalysts are needed in order to facilitate the oxygen reduction reaction (ORR) at the cathode and the hydrogen oxidation reaction (HOR) at the anode. In chapter 4, alternative metal-free ORR catalyst materials derived from lignin are studied in order to simultaneously enhance the catalytic activity, lessen the Pt dependency and reduce the excessive costs associated. Calcium sulfonate lignin was successfully converted into sulfur self-doped carbons via in-situ hydrothermal carbonization and followed by post-annealing treatment. The sulfur content in the as-prepared porous carbons is up to 3.2 wt.%. The resulting materials displayed high surface areas (up to 660 m2 g-1) with micro/meso porosity and graphitic/amorphous carbon structure. The as-prepared sulfur self-doped electrode materials (SC-850) were tested as a potential cathodic material for ORR. The number of electrons transferred per molecule was measured to be ~ 3.4 at 0.8 V, which approaches the optimum 4 electron pathway. Additionally, S-doped materials were also applied as a supercapacitor electrode material. The SC-850 electrode exhibited a high specific and volumetric capacitance values of 225 F g-1 and 300 F cm-3 at a scan rate of 0.5 A g-1. The SC-850 electrode also exhibited consistent response over 10,000 cycles at harsh conditions. It was shown that the metal-free SC-850 is a promising electrode material for supercapacitors and ORR applications.
All of the studies presented in this dissertation involve the development and application of carbon-based materials derived from lignin and its application towards the Li-ion batteries, supercapacitor, and fuel cell. Insight into the applicability of lignin-derived carbon materials towards electrochemical applications is made readily available, supplemented by detailed physical, chemical and electrochemical characterization, to examine the specific factors influencing the Li-ion batteries, supercapacitor, and electrocatalysis of fuel cell activity
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
- …
