1,720,957 research outputs found

    Indagini idrogeochimiche per la caratterizzazione degli acquiferi e proposta di un nuovo protocollo di trasmissione per il monitoraggio chimico fisico.

    No full text
    Questa tesi presenta i risultati di uno studio idrogeochimico sulla falda acquifera della pianura alluvionale nella provincia di Ferrara, come strumento per una migliore conoscenza del territorio. Le caratteristiche chimiche delle falde acquifere sono state indagare attraverso 343 analisi chimiche dei campioni di acqua (253 dal campionamento delle acque freatiche e 90 dal database regionale raccolti negli anni 2003-2015). La maggior parte delle acque hanno facies Ca-HCO3; pochi sono di tipi di NaCl, CaCl e NaHCO3. L'applicazione di analisi fattoriale alle analisi chimica ha permesso di identificare tre diversi gruppi di fattori che riducono il numero di attributi utili alla definizione dei raggruppamenti. Gruppo 1: comprendono campioni affetti da processi di scambio ionico; Gruppo 2: acque con pH basso e arricchite in metalli pesanti. Gruppo 3: campioni con alta concentrazione di HCO3. I cambiamenti climatici come l'aumento delle temperature e la diminuzione delle precipitazioni sono causate da anomalie climatiche che si riflettono in composizione isotopica di acque sotterranee. Questi cambiamenti climatici possono essere convalidate mediante la presenza di isotopi pesanti nelle acque sotterranee (2H e 18O). L’ interpretazione dei parametri climatici e un approccio statistico-idrogeochimico per lo studio dei dati su acque sotterranee sono i metodi adottati in questa ricerca. Un approccio multidisciplinare è necessario per comprendere le alterazioni alle quali le acque sono sottoposte. La composizione isotopica delle acque è nel range -10,75; -6,03 per Delta-O-18 e, -71 3 - 43, 71 per δ2H. Ciò suggerisce un origine meteorica per l'acqua ricarica. Gli approcci combinati di idrogeochimica e climatologia ci hanno permesso di rilevare i processi climatici che influenzano le risorse idriche del terreno in modo più preciso, e questi approcci rappresenteranno eccellenti strumenti di valutazione necessari per il comando bilancio idrico nella ricerca futura. I modelli geochimici sono stati usati per comprendere meglio le reazioni geochimiche che avvengono e spiegare la composizione delle acque. I maggiori cambiamenti nella composizione geochimica possono essere attribuiti a cambiamenti nella mineralogia e petrografia dei sedimenti: le acque profonde sono caratterizzate da una marcata presenza di HCO3 e basso Mg, l'acqua di superficie da un marcatore di Mg. Le acque freatiche a contatto con minerali argillosi ricevono il magnesio attraverso la lisciviazione di smectite / clorite dei sedimenti i quali hanno una capacità di scambio cationico in rapporto alla loro struttura cristallina (Ca, Na e Mg). Nelle reazioni osservate svolge un ruolo determinante scambio ionico tra Ca e Na e la risalita di acque provenienti da settori profondi le quali risalgono lungo faglie e fratture grazie alla diminuzione di densità dovuta a CH4 in soluzione. Il metano può derivare da fonti profonde e localmente dalla presenza di materiale organico che svolge un ruolo importante nello scambio di cationi da acqua / suolo il quale è stato osservato in un aumento della (capacità di scambio cationico) CEC. Per facilitare le pratiche di acquisizione dei dati di monitoraggio nell’ambito di questo lavoro è stato messo a punto un nuovo sistema di trasmissione basato su ARDUINO. Questa scheda è stata connessa ad un antenna GSM che invia i dati direttamente a un database nel cloud in cui è possibile leggere i dati in tempo reale. Il lavoro geochimici ha rappresentato uno strumento utile alla identificazione dei siti in cui sarà interessante posizionare il sistema di monitoraggio in continuo per espandere quello esistente con l'introduzione di nuove tecnologie. L'uso di questo strumento di gestione a basso costo e di facile utilizzo permetterà di migliorare la gestione delle risorse idriche.This thesis presents the results of a hydrogeochemical study on the aquifer Po floodplain, as a tool for the knowledge and definition of the best location of the new continuous monitoring system. The chemical characteristics of the aquifers have been investigate through 343 chemical analysis of water samples (253 from phreatic water sampling and 90 from the regional database collected in the years from 2003 to 2015). Most of the waters have Ca-HCO3 facies; few are of NaCl, CaCl and NaHCO3 types. The application of Factorial Analysis to the chemical analysis allowed identifying three different groups of water. Group 1: comprise samples affected by ion exchange processes; Group 2: waters with low pH and enriched in heavy metals. Group 3: samples with high concentration in HCO3. Climate changes such as increasing temperatures and decreasing precipitations are caused by climatic anomalies which are mirrored in groundwater’s isotopic composition. These climatic changes can be validated by means of the presence of heavy isotopes in ground water (2H and 18O) . The heavy isotopes can bring to the enrichment or the impoverishment of waters. A multidisciplinary approach is required to understand the alterations the waters are undergoing. The main effects of the climatic anomalies, which are reflected on ground water resources, are isotopic ratio depletion and increasing evaporation . They can be spotted in the isotopic ratio change and in the grade line comparing it to the North Meteoric Water Line (NMWL). The isotope composition of the waters is in the range -10.75; -6.03 for δ18O and, -71, 3 - 43, 71 for δ2H. This suggest a meteoric origin for the recharging water. The combined approaches of hydrogeochemistry and climatology have enabled us to detect those climatic processes affecting ground water resources in a more accurate way, and these approaches will represent excellent assessment tools required for controlling water balance in future research. Modelling has been use to better understand the geochemical reactions that take place and explain the groundwaters composition. The biggest changes in the geochemical composition can be attributed to changes in mineralogy and petrography of the sediment: deep waters are characterized by a marked presence of HCO3 and low Mg, the phreaticwater from an Mg marker. The phreaticwater being in contact with clays minerals and receive the magnesium through the leaching of smectite/chlorite of the sediments and then characterized in reason of their crystalline structure have a high cation exchange capacity (for Ca, Na and Mg). In the observed reactions play a determinant role ion exchange between Ca and Na and the rise of deep water rich in salt along faults and fractures thanks the decrease of density due to CH4 in solution. The methane may arise from deep sources and by locally presence of organic matter which play an important role in exchange of cations from water/soil as has been observe in an increase of the CEC (cation exchange capacity) A new monitoring transmission protocol have been create using the microcontroller ARDUINO to facilities the monitoring groundwaters practices. This card has been connect to a GSM antenna which sends data directly to a database in the cloud where is possible to read real-time data recorded. The geochemical work have represent a tool to identify sites where will be interesting to place the continuously monitoring system to expand the existing one with the introduction of new technologies. The use of this low cost and easy management tool will allow an improvement in the water resource management

    Geochemical and microclimatic characterization of the water resources in the Copparo area (Ferrara, Italy)

    No full text
    The Ferrara province is located in the Po valley, a low plain surrounded by Alps and Apennine. This research was focused on Copparo area, which is characterized by closeness from the sea and by its continental climate [1]. In this work, we have studied the isotopic heavy element composition (δ2H e δ18O) of the meteoric waters picked up in six chosen stations, in order to verify the compositional variability on an extensive province area. The selected stations for this study include several province sectors and they allowed to determine the isotopic range, which characterizes the local meteoric waters. A framing climate, associated with the isotopic study, was conducted to better define the character of the climate and the type of precipitations which affects the area. The measurement methodology is based on the spectroscopy of laser absorption to high solution [2, 3]. The registered isotopic values show a range of -6,95 and -5,19 for the δ 18O and a mean value between -46,21 and -31,82 for the δ D. Considering the concentration of heavy isotopes (δ 18O and δ D values), it was possible to identify the origin of precipitations. The comparison between data obtained by the sample analysis and the Northern Italy meteoric straight line [2, 4] has allowed to define a first characterization of the isotope distribution in meteoric waters concerning this area. In conclusion, the application of the isotopic techniques, as highlighted by the collection of these data, can be considered very useful to create a dataset for rainfall of the Ferrara province and to improve a bigger knowledge of the geochemical zone features

    Going Beyond Counting First Authors in Author Co-citation Analysis

    Full text link
    The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed

    Variations on the Author

    Full text link
    “Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship

    Appropriate Similarity Measures for Author Cocitation Analysis

    Full text link
    We provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis

    Dispelling the Myths Behind First-author Citation Counts

    Full text link
    We conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more sophisticated methods

    Author Index

    No full text
    Nao informado

    koamabayili/VECTRON-author-checklist: VECTRON author checklist

    No full text
    We have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used

    Mobilità dei gruppi neandertaliani della grotta Ciota Ciara (Borgosesia, VC). Nuovi dati sulle aree di approvvigionamento delle materie prime litiche

    Full text link
    La grotta della Ciota Ciara si apre sul versante occidentale del Monte Fenera (Borgosesia, VC) a una quota di 670 m s.l.m. e il suo interesse archeologico è noto fin dagli anni ’50 del ‘900. Dal 2009 ricerche sistematiche sono iniziate a opera dell’Università degli Studi di Ferrara (Angelucci et al., 2015; Arzarello et al., 2012; Buccheri et al., 2016; Daffara et al., 2014). Gli scavi hanno interessato l’area atriale della grotta mettendo in luce una successione stratigrafica all’interno della quale sono state individuate sei unità stratigrafiche (13, 103, 14, 140, 15 e 16) di cui l’ultima (US 16) poggia direttamente sul substrato dolomitico ed è archeologicamente sterile (Angelucci et al., 2015). Le analisi paleontologiche delle faune e tecnologiche e funzionali delle industrie litiche hanno evidenziato come l’US 13 sia caratterizzata da frequentazioni ripetute ma di breve durata, mentre la successiva US 14 attesta frequentazioni più intense del sito (Buccheri et al., 2016; Daffara et al., 2014). A supporto di questa ipotesi si hanno una maggiore abbondanza di industrie litiche, un aumento nella varietà delle materie prime utilizzate, un incremento nel numero di resti di erbivori introdotti nel sito dall’uomo e su cui sono state rinvenute tracce di macellazione e la presenza di un focolare. Con la successiva US 15, cui corrisponde un generale irrigidimento del clima, si ha un ritorno a frequentazioni più brevi e sporadiche con caratteristiche simili a quanto riscontrato nell’US 13. Guardando in particolare all’insieme litico di ciascuna unità stratigrafica, l’utilizzo del quarzo filoniano per la realizzazione dello strumentario litico è dominante lungo tutta la sequenza. In tutte le unità a esso si affianca la scheggiatura di selce di scarsa qualità (spongolite). Nelle unità 14 e 15 a queste materie prime se ne affiancano altre di qualità migliore che vengono introdotte nel sito sotto forma di strumenti finiti. Una prima determinazione delle aree di approvvigionamento delle materie prime litiche è stato condotto nel 2011 interessando il quarzo filoniano e la spongolite dell’US 13 (Arzarello et al., 2012). Per il quarzo sono state individuate diverse aree di affioramento alla base del Monte Fenera mentre la raccolta di supporti per la scheggiatura avveniva presso aree di deposizione secondaria, con la scelta di ciottoli di dimensioni e morfologia adatta ai metodi di scheggiatura impiegati. Per la spongolite le aree di affioramento si collocano invece all’interno dei calcari che costituiscono la parte sommitale del Monte Fenera. La raccolta anche in questo caso avveniva in deposizione secondaria con la scelta di placchette e blocchi di dimensioni volute. Un nuovo studio delle aree di approvvigionamento delle materie prime ha permesso di delineare più accuratamente la mobilità dei gruppi neandertaliani sul territorio. Le metodologie impiegate si basano sull’esame del materiale archeologico tramite microscopia ottica e elettronica a scansione (SEM) e sul campionamento di affioramenti e di aree di approvvigionamento secondarie sul territorio. In particolare, è stata messa a punto una metodologia specifica che attraverso lo studio delle alterazioni e della morfologia dei neo-cortici ha permesso di individuare con maggiore precisione le aree di approvvigionamento del quarzo in deposizione secondaria. Le materie prime di migliore qualità, che fanno la loro comparsa nell’US 14, sono invece state caratterizzate come una riolite di provenienza sub-locale, reperibile lungo il torrente Sessera (~2,5 Km in linea d’aria) e come una radiolarite rosso-bruna proveniente da affioramenti localizzati lungo la sponda lombarda del Lago Maggiore (Gruppo del Selcifero Lombardo, ~30 km in linea d’aria). I risultati ottenuti consentono per la prima volta di definire le dinamiche di sfruttamento del territorio nonché il comportamento economico dei gruppi neandertaliani che frequentarono Piemonte e Lombardia durante il Paleolitico medio
    corecore