1,721,004 research outputs found
The Cold Waters in the Port of Genoa (NW Mediterranean Sea) during the Marine Heatwave in Summer 2022
Extreme weather phenomena have become more frequent and intense in recent decades in the context of climate change, and these include heat waves that affect both the atmosphere and seawater masses. In 2022, a summer marine heatwave (MHW) affected the entire Mediterranean Sea, and temperatures up to 5 °C above seasonal mean were reached in the Ligurian Sea in the NW part of the Mediterranean basin. In this scenario, the waters of the Port of Genoa (at the northern apex of the Ligurian Sea) distinguished themselves by maintaining lower temperatures than those of the open sea (a maximum gradient of −6.1 °C on 9 August 2022) after the passage of a fast-moving storm. In this study, the weather and sea parameters of the period (June–December 2022) are analysed to determine the phenomenon that caused the drop in temperatures in the water masses of the Port of Genoa. The sudden cooling of the water masses inside the port was caused by a heavy rainfall event in early August. Moreover, the isolation of the port water masses due to the weak dynamics of the period kept them stationary and locked inside the port. Seawater temperatures inside the port slowly rose again after the event, remaining cooler than outside temperatures throughout August (−0.3 °C on 31 August), reaching and exceeding outside temperatures on 3 September (26.4 °C), and remaining warmer until 3 November 2022 (21.5 °C)
Settling velocity of microplastics exposed to wave action
Microplastic (MP) debris is recognized to be one of the most serious threats to marine environments. They are found in all seas and oceanic basins worldwide, even in the most remote areas. This is further proof that the transport of MPs is very efficient. In the present study, we focus our attention on MPs’ transport owing to the Stokes drift generated by sea waves. Recent studies have shown that the interaction between heavy particles and Stokes drift leads to unexpected phenomena mostly related to inertial effects. We perform a series of laboratory experiments with the aim to directly measure MPs’ trajectories under different wave conditions. The main objective is to quantify the inertial effect and, ultimately, suggest a new analytical formulation for the net settling velocity. The latter formula might be implemented in a larger scale transport model in order to account for inertial effects in a simplified approach
The nepheloid bottom layer and the dynamics of the water masses at the shelf break of the western Ross Sea (Antarctica). .
In the austral summers of 2000/2001 and 2002/2003 the Italian CLIMA Project carried out two oceanographic cruises along the northwestern margin of the Ross Sea, where the Antarctic Bottom Water forms. Here there is an interaction between the water masses on the sea floor of the outer shelf and slope with a consequent evolution of benthic nepheloid layers and an increase in total particulate matter. We observed three different situations: (a) the presence of triads (bottom structures characterized by a concomitant jump in turbidity, temperature, and salinity data) and high resuspension phenomena related to the presence of the Circumpolar DeepWater and its mixing with cold, salty shelf waters associated with gravity currents; (b) the absence of triads with high re-suspension, implying that when the gravity currents are no longer active the benthic nepheloid layer may persist until the suspended particles settle to the sea floor, suggesting that the turbidity data can be used to study recent gravity current events; and (c) the absence of turbidity and sediment re-suspension phenomena supports the theory that a steady situation had been re-established and the current interaction no longer occurred or had finished sometime before
Considerations on salts used for density separation in the extraction of microplastics from sediments
Environmental contamination by plastics and microplastics is a recognised problem worldwide, and it is the focus of many research teams. In the quantification of microplastics in the environment (plastic items with dimensions between 1 μm and 5 mm), the search for shared and universally recognised protocols and methodologies is still ongoing. In this study, the use of a method for extracting microplastics from marine sediments based on density separation has been considered. Fifty studies were analysed to investigate the scenario of salts exploited during microplastic extraction. The most commonly used salts are NaCl (45.6%), ZnCl2 (19.3%) and NaI (17.5%). Considerations related to cost, availability, hazards of the salts and thus the repeatability of the related extraction method are reported. In light of the findings, NaCl remains the most readily usable, economical and effective salt for the extraction of microplastics from marine sediments
Baseline of distribution and origin of Rare Earth Elements in marine sediment of the coastal area of the Eastern Gulf of Tigullio (Ligurian Sea, North-West Italy)
A study on the Rare Earth Element (REE) distribution in the bottom sediments of the Gulf of Tigullio (north-west
Italy) was conducted. The results constitute a baseline for this zone of the Ligurian Sea and enabled the obtaining
of valuable information on the origin and transport of sediments in the gulf. The distribution of REEs is con-
trolled by phosphates, mainly monazite, and is generally homogeneous in the study area, reflecting the
homogeneous distribution of the minerals. Some differences in REE and Sc distribution allow us to identify two
sub-basins (Entella and Gromolo torrent sub-basins) characterised by slightly different geological frameworks.
The “hat-shaped” observed patterns seem to indicate an overprinting of the original REE patterns due to ex-
changes between phosphates and seawater. REEs seem to be related with the rocks outcropping in the area,
although an indirect effect of anthropic activity could be seen near a fish farm
Sediment distribution on the continental shelf in relation to stream inputs and contamination: hydrodynamic, chemical, mineralogical, and sedimentological characteristics (Ligurian Sea, Italy)
River estuaries, continental shelf, and sediment contamination are closely linked from the point of view of sediment transport and diffusion that is governed by different factors such as sea waves and currents, river flows and floods, and sediment characteristics. Taking these factors into consideration, we have examined marine environmental and marine bottom sediments off the mouth of a stream to highlight the main ways of sediment and contaminant transport and diffusion on the continental shelf. For this purpose, we followed a multidisciplinary approach, studying circulation of water masses, hydrological characteristics of water column, distribution and main characteristics of sediment grain size, sediment mineralogical composition, and metal concentrations of bottom sediments. Our results allowed identifying the presence of preferential ways of sediment deposition and areas of sediment spread for the Entella Stream, as well as the origin of some metals
First Attempt to Study Sedimentological Characteristics and Contamination Levels of Bottom Sediments in the Faanu Mudugau Blue Hole (Ari Atoll, Maldives)
Environmental contamination is ubiquitous and even in the ocean, signs of contamination of different types (chemical, biological, or plastic) are detected in all kinds of environments. In this study, a sediment core was sampled at the bottom of the Blue Hole of the Maldives (Ari Atoll) to make a first characterization of the sediment in terms of its grain size and organic–inorganic matter composition and to assess the sediment contamination levels in terms of trace elements (by ICP-MS analysis) and the eventual presence of microplastics (by optical classification and microRaman analysis of items). High concentrations of Hg (a maximum value of 0.145 ppm at the bottom layer of the core), Cd (a maximum value of 0.65 ppm at the core surface layer), and As (9.4 ppm at the top of the core) were highlighted at different layers of the sediment core. Plastic polymers were not detected in the sediment core, but 51 fibers characterized by the presence of artificial dyes or additives were found in the core (a mean of 5.7 fibers for each slice). The results confirmed the sediment contamination of the Maldivian Blue Hole, supporting the hypothesis of contamination due to ineffective waste management within the archipelago and mass tourism affecting the atolls
Going Beyond Counting First Authors in Author Co-citation Analysis
The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
- …
