1,720,971 research outputs found
Physical properties of phase-change emulsions
No full textPhase-change emulsions (PCE) are important in a variety of applications, from ultrasound imaging to the explosive material used in the mining industry, but until now there has been no adequate theory to describe their activation properties. The PCE consists of a low-boiling-point liquid, known as the volatile phase, dispersed in an aqueous phase. The volatile phase boils as a result of an increase in the temperature of the emulsion. The volume of the emulsion will increase during this phase transition, with the transition temperature and final volume of the emulsion highly dependent on the initial radius of the liquid droplets. Here a description of the change in boiling point and freezing point of the volatile phase, as well as the volume change of a droplet in the emulsion as a function of the initial droplet radius, is presented. The influence of volatile phase solubility, liquid-liquid interfacial tension, and final temperature are explored, accounting for the influence of confinement on the properties of the volatile phase. Beyond this, a means by which the diffusivity of the gas in the continuous liquid phase can be measured is derived
Measurement of long range attractive forces between hydrophobic surfaces produced by vapor phase adsorption of palmitic acid
No full textExtensive research into the surface forces between hydrophobic surfaces has produced experimentally measured interaction forces that vary widely in range and in magnitude. This variability is attributed to interference from surface nanobubbles and the nature of the hydrophobic surface. Whilst the effects of nanobubbles are now recognised and can be addressed, the precise nature of the surface remains a confounding factor in measurements between hydrophobic surfaces. Here we show that a monolayer coating with hydrophobic properties is formed by exposing metal oxide surfaces to palmitic acid vapour. Surface forces measured between these smooth hydrophobic surfaces exhibited an exponential attraction. Neither patchy surface charges, nor surface nanobubbles could explain the measured forces. However, the observed interaction may be explained by the interaction of a single patch of bilayered palmitic acid molecules interacting with an exposed patch of the hafnia surface. Such an interaction is consistent with the observed exponential nature of the attraction and the agreement between the measured decay of the exponential attraction with the Debye length of the solution
Surface forces: Surface roughness in theory and experiment
No full textA method of incorporating surface roughness into theoretical calculations of surface forces is presented. The model contains two chief elements. First, surface roughness is represented as a probability distribution of surface heights around an average surface height. A roughness-averaged force is determined by taking an average of the classic flat-surface force, weighing all possible separation distances against the probability distributions of surface heights. Second the model adds a repulsive contact force due to the elastic contact of asperities. We derive a simple analytic expression for the contact force. The general impact of roughness is to amplify the long range behaviour of noncontact (DLVO) forces. The impact of the elastic contact force is to provide a repulsive wall which is felt at a separation between surfaces that scales with the root-mean-square (RMS) roughness of the surfaces. The model therefore provides a means of distinguishing between "true zero," where the separation between the average centres of each surface is zero, and "apparent zero," defined by the onset of the repulsive contact wall. A normal distribution may be assumed for the surface probability distribution, characterised by the RMS roughness measured by atomic force microscopy (AFM). Alternatively the probability distribution may be defined by the histogram of heights measured by AFM. Both methods of treating surface roughness are compared against the classic smooth surface calculation and experimental AFM measurement
Surface forces in particle technology: Wet systems
No full textSurface forces play a fundamental role in particle processing as they control the stability, adhesion, friction and rheology of particulate systems and information on all of these can be obtained from an analysis of the normal forces measured between particles. Therefore particle processing at all stages can be informed by knowledge of the forces between the constituent particles. For wet particles systems, the interaction forces between two particles can rarely be predicted from theory, but rather requires experimentation or direct measurement. This requires that the surfaces used have the same as surface properties as the particles. In practice this is rarely possible, as surface force measurements require surfaces with extremely low roughness and precise geometry and the majority of materials do not conform to these requirements. To address these challenges we produce surfaces of low roughness and controlled chemistry using Atomic Layer Deposition (ALD) and are developing methods to calculate and understand the influence of surface roughness on the measured forces. Here we report the forces between hafnia surfaces produced by ALD and show that like ALD produced titania surfaces and silica surfaces, the expected van der Waals forces at high pH are not manifest, suggesting that most real surfaces have unexpectedly repulsive surface forces at high pH and small separations. This will fundamentally alter how these particulate systems behave when being processed, reducing the adhesion and the friction and enhancing the stability compared to the expected interaction from DLVO theory
Direct measurement of van der Waals and diffuse double-layer forces between titanium dioxide surfaces produced by atomic layer deposition
No full textThe van der Waals forces between titanium dioxide surfaces produced by atomic layer deposition (ALD) at the isoelectric point have been measured and found to agree with the calculated interaction using Lifshitz theory. It is shown that under the right conditions very smooth ALD surfaces are produced. At pH values slightly below and above the isoelectric point, a repulsive diffuse double-layer repulsion was observed and is attributed to positive and negative charging of the surfaces, respectively. At high pH, it was found that the forces remained repulsive up until contact and no van der Waals attraction or adhesion was evident. The absence of an attraction cannot be explained by the presence of hydration forces
The Role of Citric Acid in the Stabilization of Nanoparticles and Colloidal Particles in the Environment: Measurement of Surface Forces between Hafnium Oxide Surfaces in the Presence of Citric Acid
No full textThe interactions between colloidal particles and nanoparticles determine solution stability and the structures formed when the particles are unstable to flocculation. Therefore, knowledge of the interparticle interactions is important for understanding the transport, dissolution, and fate of particles in the environment. The interactions between particles are governed by the surface properties of the particles, which are altered when species adsorb to the surface. The important interactions in the environment are almost never those between the bare particles but rather those between particles that have been modified by the adsorption of natural organic materials. Citric acid is important in this regard not only because it is present in soil but also as a model of humic and fulvic acids. Here we have studied the surface forces between the model metal oxide surface hafnia in the presence of citric acid in order to understand the stability of colloidal particles and nanoparticles. We find that citric acid stabilizes the particles over a wide range of pH at low to moderate ionic strength. At high ionic strength, colloidal particles will flocculate due to a secondary minimum, resulting in aggregates that are dense and easily redispersed. In contrast, nanoparticles stabilized by citric acid remain stable at high ionic strengths and therefore exist in solution as individual particles; this will contribute to their dispersion in the environment and the uptake of nanoparticles by mammalian cells
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
- …
