196,011 research outputs found
A Cutting Force and Hole Geometry Study for Precision Deep-Hole Microdrilling of Magnesium
No full textSize effects, high thrust forces, limited heat dissipation, and tool deterioration are just some of the challenges that deep microdrilling poses, underscoring the importance of effective process control to ensure quality. In this paper, an investigation performed on a microdrilling process on pure magnesium using a 0.138 mm diameter microdrill to achieve an aspect ratio equal to 36 is proposed. The effect of the variation of the cutting parameters feed per tooth (Formula presented.) and cutting speed (Formula presented.) was studied on thrust force, supporting hole quality evaluation in terms of burr height, entrance, and inner diameters. The results showed that (Formula presented.) significantly influences the hole quality. In fact, as (Formula presented.) increases, the burr height decreases and the inner diameter approaches the nominal diameter. However, optimizing the hole geometry with high feed per tooth values increases the thrust forces, compromising tool life. In fact, a significant dependence of the thrust force on both cutting parameters was found. In this scenario, increasing (Formula presented.) can mitigate the high thrust forces by inducing material softening. The study results improve precision manufacturing by refining parameters, ensuring the quality and reliability of magnesium-based microcomponents
Determinants and Trends of Adherence to a Gluten-Free Diet in Adult Celiac Patients on a Long-term Follow-up (2000–2020)
No full textGluten-sensitive enteropathy of the irish setter and similarities with human celiac disease
No full textGluten-sensitive enteropathy of the Irish Setter is an immune-mediated intolerance to gluten, the protein found in wheat, barley, rye, and oats, reminiscent of human celiac disease. Intestinal histological lesions include partial villous atrophy, infiltration of the lamina propria by lymphocytes and plasma cells, and an increased intraepithelial lymphocyte count. Gluten-sensitive enteropathy is transmitted via autosomal recessive inheritance and its pathogenesis appears to involve cell-mediated immunity but not humoral immunity. In comparison to healthy dogs, levels of antigliadin antibodies in diseased Irish Setters are lower, although the significance of this finding is unclear. Irish Setters affected by gluten-sensitive enteropathy present with chronic intermittent diarrhea and weight loss. The use of a gluten-free diet is indispensable both for diagnosis of the disease and for therapy. In this review we discuss the similarities between gluten-sensitive enteropathy of the Irish Setter and human celiac disease
Dr. Duane M. Jackson, Morehouse College, July 2011
No full textThis video is a conversation with Dr. Duane M. Jackson. Dr. Jackson talks about his paper, "Recall and the Serial Position Effect: The Role of Primacy and Recency on Accounting Students' Performance." Jackie Daniel, AUC Woodruff Library, is the interviewer
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States" By M. Carey.
No full text"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States: containing bried sketches of the moral and political character of those states.
By M. Carey, member of the American philosophical, and of the American Antiquarian Society, and author of The Olive Branch, Cindiciae Hibernicae, essays on banking, on political economy, and on internal improvement.
To which are now added the English editor's comments on the subject; together with Important Advice to Emigrants, and Cautions Against Impositions Practiced in the Outports
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
Dr. Glendon Swarthout
No full textHosted by Roger M. Busfield, MSU Assistant Professor of Speech and Theater, Meet the Author is designed to introduce a general audience to a contemporary author and their work through in-depth interviews. This episode features a conversation between Dr. Glendon Swarthout, prolific author and English professor at MSU, and assistant professors Sam S. Baskett and Theodore B. Strandness
PROGRESSIVE ALTERATIONS IN SYSTEMIC AND CARDIOPULMONARY HEMODYNAMICS OCCUR IN PATIENTS WITH CIRRHOSIS AND PREDICT DEATH IN DECOMPENSATED CIRRHOSIS
No full textBackground and Aims: The main stages of cirrhosis (compensated and decompensated) have been substaged based on clinical, endoscopic, and portal pressure (determined by the hepatic venous pressure gradient, HVPG) features. Vasodilation leading to a hyperdynamic circulatory state is central in the development of a late decompensated stage with inflammation being currently considered a key driver. We aimed to assess hepatic/systemic hemodynamics and inflammation (by C reactive protein, CRP) among the different substages of cirrhosis and to investigate their interrelationship and prognostic relevance.
Methods: Single center, prospective cohort of patients with cirrhosis undergoing per protocol hepatic and right-heart catheterization and CRP measurement, classified into recently defined prognostic stages (PS) of compensated (PS1: HVPG ≥6mmHg but 4.2).
Results: 238 patients, 151 compensated (PS1=25; PS2=36; PS3=90), 87 decompensated (PS4=48; PS5=39). Mean arterial pressure decreased progressively from PS1 to PS5, cardiac index increased progressively from PS1-to-PS4 but decreased in PS5. HVPG, MELD, and CRP increased progressively from PS1-to-PS5. Among compensated patients, age, HVPG, relatively-hypodynamic/hyperdynamic state and CRP were predictive of decompensation. Among patients with ascites, MELD, relatively-hypodynamic/hyperdynamic state, post-capillary pulmonary hypertension, and CRP were independent predictors of death/liver transplant.
Conclusions: Our study demonstrates that, in addition to known parameters, cardiopulmonary hemodynamics and CRP are predictive of relevant outcomes in patients with both compensated and decompensated cirrhosis
Simulation of thermal plant optimization and hydraulic aspects of thermal distribution loops for large campuses
No full textFollowing an introduction, the author describes Texas A&M University and its utilities system. After that, the author presents how to construct simulation models for chilled water and heating hot water distribution systems. The simulation model was used in a $2.3 million Ross Street chilled water pipe replacement project at Texas A&M University. A second project conducted at the University of Texas at San Antonio was used as an example to demonstrate how to identify and design an optimal distribution system by using a simulation model. The author found that the minor losses of these closed loop thermal distribution systems are significantly higher than potable water distribution systems. In the second part of the report, the author presents the latest development of software called the Plant Optimization Program, which can simulate cogeneration plant operation, estimate its operation cost and provide optimized operation suggestions. The author also developed detailed simulation models for a gas turbine and heat recovery steam generator and identified significant potential savings. Finally, the author also used a steam turbine as an example to present a multi-regression method on constructing simulation models by using basic statistics and optimization algorithms. This report presents a survey of the author??s working experience at the Energy Systems Laboratory (ESL) at Texas A&M University during the period of January 2002 through March 2004. The purpose of the above work was to allow the author to become familiar with the practice of engineering. The result is that the author knows how to complete a project from start to finish and understands how both technical and nontechnical aspects of a project need to be considered in order to ensure a quality deliverable and bring a project to successful completion. This report concludes that the objectives of the internship were successfully accomplished and that the requirements for the degree of Degree of Engineering have been satisfied
Intern experience at CH���M Hill, Inc.: an internship report
No full textIncludes author's vita"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirement for the degree of Doctor of Engineering."Includes bibliographical referencesA review of the author's internship experience with CH���M HILL, Inc.
during the period September 1975 through May 1976 is presented. During this nine month
internship the author worked as an Engineer II in the Industrial Processes discipline of this
large consulting engineering firm... The author's prime responsibility was as one of three
lead design engineers on the design of a large wastewater treatment facility for a pulp mill
in Hoquiam, Washington owned by ITT Rayonier Inc. The work generally consisted of the design
of individual treatment units and associated piping and pumping. The purpose of the project
was to provide wastewater treatment capabilities that would satisfy the effluent limitations
(standards) imposed upon the mill by the State of Washington Department of Ecology and the
U.S. Environmental Protection Agency. The author's assignment also entailed necessary
interaction with the project manager and other CH���M HILL design engineers and support staff
members, the client's representatives, and representatives of two other consulting engineering
firms working on the project. Thus, the internship position at CH���M HILL provided considerable
experience coordinating the author's work with the work of other engineers, guiding the design
and administrative efforts of a support staff, and interacting regularly with the client and
other consulting firms. This broad exposure to a variety of engineering and organizational
problems provided a valuable educational experience
- …
