169,876 research outputs found
Evaluation of physicochemical characteristics, color and volatile profile of low alcohol beverage based on concentrated white wine produced by NF and RO membranes
No full textMembrane-based technologies have emerged as vital methods for reducing or removing ethanol in winemaking. This study evaluates the efficacy of nanofiltration (NF-DK) and reverse osmosis (RO-SG) membranes in ethanol reduction for white wine, focusing on permeate flux behavior, fouling index, permeability, ethanol rejection rates, and retention of essential wine components. Experiments were conducted at 21 degrees C, achieving a weight reduction factor (WRF) of 4. The RO-SG membrane experienced a significant decline (78.2 %) in flux over 247 min to achieve WRF 4, whereas the NF-DK membrane exhibited a lesser flux decline of 49.2 %, reaching WRF 4 in just 40 min. Despite the higher ethanol rejection achieved by RO-SG (16.3 %) compared to NF-DK (1.8 %), ROSG demonstrated greater retention of critical compounds, including citric acid, tartaric acid, lactic acid, total acidity, glycerol, dry extract, and key volatile compounds. The produced low-alcohol wines, RO(B) (3.07 % v/v) and NF(B) (2.50 % v/v), showed significant physicochemical changes. Colorimetric analysis revealed deeper red hues and greater color intensity in RO(B) (0.28) compared to NF(B) (0.19) and the original wine (0.23), with a Delta E of 3.26 for RO(B), indicating pronounced visual deviations. Moreover, the retention of volatile compounds was substantially higher in RO(B) (55 %) compared to NF(B) (28 %), highlighting substantial differences in aroma and flavor. These findings highlight the potential of membrane-based approaches for ethanol reduction while emphasizing their impact on key quality parameters, providing valuable insights for the scalable production of low-alcohol wines with controlled compositional attributes
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Characterization of olive mill wastewater fractions treatment by integrated membrane process
No full textBACKGROUND: Up to now, the management of olive mill wastewaters, a three-phase mill by-product, remains an unsolved problem, in particular for those regions where huge quantities of vegetable water are produced. Olive mill wastewaters were therefore treated to evaluate the characteristics of permeate and retentate fractions produced by an integrated membrane systemworking at two different volume concentration factors.
RESULTS: The effect of two membrane-based filtration steps (microfiltration and nanofiltration) on the content of chemical oxygen demand, dry matter, sensory quality, phenolic compounds and antioxidant activity of permeate and retentate samples was evaluated. Furthermore, the effect of two different volume concentration factors (VCF), in the nanofiltration step, were investigated. At high VCF values, the total phenolic content in the retentate fraction was found to be 3.7-fold higher than the starting one, while the reduction of chemical oxygen demand in the permeate fraction was greater than 97%also at lower VCF values.
CONCLUSION: Each filtration step has provided useful information concerning the utility and appropriateness of the processes chosen, suggesting a sustainable hypothesis of ‘normal industrial practice’ that can be included in current processes of oil extraction, in order to purify water and recover phenolic compounds with high added value
Enhancing Ethanol Removal from Wine: A Comparative Study of Reverse Osmosis, Nanofiltration and Osmotic Distillation
No full textMitomycin C in highly myopic eyes - Author reply
No full textOphthalmology. 2005 Feb;112(2):208-18; discussion 219.
Mitomycin C modulation of corneal wound healing after photorefractive keratectomy in highly myopic eyes.
Gambato C, Ghirlando A, Moretto E, Busato F, Midena E.
SourceRefractive Surgery Service and Antimetabolite Therapy Research Unit, Department of Ophthalmology, University of Padova, Padova, Italy.
Abstract
PURPOSE: To evaluate the role of topical mitomycin C in corneal wound healing (CWH) after photorefractive keratectomy (PRK) in highly myopic eyes.
DESIGN: Prospective, double-masked, randomized clinical trial.
PARTICIPANTS: Seventy-two eyes of 36 patients affected by high (>7 diopters) myopia.
METHODS: In each patient, one eye was randomly assigned to PRK with intraoperative topical 0.02% mitomycin C application, and the fellow eye was treated with a placebo. Postoperatively, mitomycin C-treated eyes received artificial tears (3 times daily, tapered in 3 months), whereas the fellow eye was treated with fluorometholone sodium 2% and artificial tears (3 times daily, tapered in 3 months).
MAIN OUTCOME MEASURES: Uncorrected visual acuity (UCVA) and best-corrected visual acuity (BCVA), contrast sensitivity, manifest refraction, and biomicroscopy. Contrast sensitivity was determined using the Pelli-Robson chart. Corneal confocal microscopy documented CWH.
RESULTS: Mean follow-up was 18 months (range, 12-36). No side effects or toxic effects were documented. At 12-month follow-up examination, UCVAs (logarithm of the minimum angle of resolution) were 0.4+/-0.48 and 0.5+/-0.53 (P = .03) in mitomycin C-treated eyes and corticosteroid-treated eyes, respectively. At 1 year, corneal haze developed in 20% of corticosteroid-treated eyes, versus 0% of mitomycin C-treated eyes. At 12, 24, and 36 months, corneal confocal microscopy showed activated keratocytes and extracellular matrix significantly more evident in untreated eyes (Ps = 0.004, 0.024, and 0.046, respectively).
CONCLUSION: Topical intraoperative application of 0.02% mitomycin C can reduce haze formation in highly myopic eyes undergoing PRK.
Comment in
Ophthalmology. 2006 Feb;113(2):357; author reply 357-8
A new physical-chemical process for the efficient production of cellulose fibers from Spanish Broom (Spartium junceum L.)
No full textA novel and efficient method for the extraction of cellulose fibers from Spanish broom(Spartium junceum L.)
is presented. The method is based on the sequential combination between an initial chemical stage (alkaline
digestion) and a subsequent physical–chemical stage, consisting of compression with hot air in an
autoclave followed by rapid decompression (DiCoDe process, digestion–compression–decompression).
The alkaline mother liquor deriving from the initial digestion step can be conveniently recycled after centrifugation
followed by ultrafiltration. The process is characterized by the production of fibers with excellent
physical–chemical properties, such as high mechanical resistance and high elasticity, and rapid
production times. The fibers obtained after the DiCoDe process can be further softened and whitened
by means of enzymatic digestion.
Fibers were morphologically characterized by scanning electron microscopy (SEM), while their composition
and physical–chemical properties were determined by conventional methods, including colorimetry,
TAPPI protocols, IR spectroscopy, and X-ray diffractometry
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
A Multi-Language Comparison of Influences on Author Verification using Character N-Grams
No full textWe create a new multi-language corpus for author verification based on Wikipedia talkpages, and evaluate the influence that differences in topic and time have on character n-gram author profiles. Topic alignment between two texts is found to increase author verification precision, and an authors writing style is found to change over time, but not more significantly after 3 years than after 1 year.Information ArchitectureWISElectrical Engineering, Mathematics and Computer Scienc
A 0.12mm<sup>2</sup> Wien-Bridge Temperature Sensor with 0.1°C (3σ) Inaccuracy from -40°C to 180°C
No full text Resistor-based temperature sensors can achieve much higher resolution and energy efficiency than conventional BJT-based sensors [1], but they typically occupy more area (> 0.25 mm 2 ) and have lower operating temperatures (le 125 {circ} {C}) [2]-[4]. This work describes a 0.12mm 2 resistor-based sensor that uses a Wien-bridge (WB) filter to achieve 0.1 {circ} {C} (3 sigma) inaccuracy from - 40 {circ} {C} to 180 {circ} {C}. Compared to a state-of-the-art WB sensor [4], it occupies 6 × less area and achieves comparable relative accuracy over a 76% wider operating range. Session 10.3 Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
A ±25A Versatile Shunt-Based Current Sensor with 10kHz Bandwidth and ±0.25% Gain Error from -40°C to 85°C Using 2-Current Calibration
No full textAccurate current sensing is critical in many industrial applications, such as battery management and motor control. Precise shunt-based current sensors have been reported with gain errors of less than 1% over the industrial temperature range (-40°C to 85°C) [1]–[4]. However, since they are intended for coulomb counting, their bandwidth is limited to a few tens of Hz, making them unsuitable for battery impedance or motor-current sensing. This paper presents a current sensor with a wide (10kHz) bandwidth and a tunable temperature compensation scheme (TCS), which allows it to be flexibly used with different types of shunts while maintaining high accuracy. A low-cost room-temperature calibration scheme is proposed to optimize gain flatness over temperature by exploiting the shunt's self-heating at large currents. Over the industrial temperature range and a ±25A current range, it achieves state-of-the-art gain error (±0.25%) with both low-cost PCB and stable metal-alloy shunts.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
- …
