169,749 research outputs found
Exploring the elasticity and adhesion behavior of cardiac fibroblasts by atomic force microscopy indentation
Get PDFAFM was used to collect the whole force–deformation cell curves. They provide both the elasticity and adhesion
behavior of mouse primary cardiac fibroblasts. To confirm the hypothesis that a link exists between the membrane
receptors and the cytoskeletal filaments causing therefore changing in both elasticity and adhesion behavior,
actin-destabilizing Cytochalsin D was administrated to the fibroblasts. From immunofluorescence
observation and AFM loading/unloading curves, cytoskeletal reorganization as well as a change in the elasticity
and adhesion was indeed observed.
Elasticity of control fibroblasts is three times higher than that for fibroblasts treated with 0.5 μMCytochalasin. Moreover,
AFM loading–unloading curves clearly show the different mechanical behavior of the two different cells analyzed:
(i) for control cells the AFM cantilever rises during the dwell time while cells with Cytochalasin fail to show
such an active resistance; (ii) the maximumforce to deform control cells is quite higher and as far as adhesion is concern
(iii) the maximum separation force, detachment area and the detachment process time are much larger for
control compared to the Cytochalasin treated cells. Therefore, alterations in the cytoskeleton suggest that a link
must exist between the membrane receptors and the cytoskeletal filaments beneath the cellular surface and inhibition
of actin polymerization has effects on the whole cell mechanical behavior as well as adhesion
Atomic force microscopy of 3T3 and SW-13 cell lines: an investigation of cell elasticity changes due to fixation
No full textMechanical properties of single cells are of increasing interest both from a fundamental cell biological perspective and in the context of disease diagnostics. In this respect, atomic force microscopy (AFM) has become a powerful tool for imaging and assessing mechanical properties of biological samples. However, while these tests are typically carried out on chemically fixed cells, the most important data is that on living cells. The present study applies AFM technique to assess the Young’s modulus of two cells lines: mouse embryonic fibroblasts (NIH/3T3) and human epithelial cancer cells (SW-13). Both living cells and those fixed with paraformaldehyde were investigated. This analysis quantifies the difference between Young’s modulus for these two conditions and provides a coefficient to relate them. Knowing the relation between Young modulus of living and fixed cells, allows carrying out and comparing data obtained during steady-state measurements on fixed cells that are more frequently available in the clinical and research settings and simpler to maintain and probe
Design, Prototyping and Testing of a Rotating Electrical Machine with Linear Geometry for Shipboard Applications
Get PDFConventional rotating electrical machines are characterized by stator and rotor structures featuring a cylindrical geometry around the shaft rotational axis. Although advantageous for mechanical reasons, the cylindrical geometry results in overall machine shapes and dimensions that may be unsuitable for installation. This particularly occurs in shipboard applications, where electric motors and generators are subject to stringent room constraints and need to be fit in unusually shaped compartments. This paper presents the development and test of a dual-shaft rotating permanent-magnet electric machine prototype having a linear structure that facilitates its onboard use for such applications as electric propulsion and rudder actuation. In fact, the proposed machine topology has overall dimensions which can be adjusted to fit the space available for installation. The operating concept and the detailed electromechanical design of the machine are first described. Then the manufacturing and factory test of the prototype under inverter supply are illustrated. Finally, the validation of the prototype as a boat propulsion variable-speed inverter-fed motor is presented. It is proved that, despite of its highly non-conventional electromechanical design, the machine can be effectively fed from a general-purpose inverter for permanent magnet motors
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Mitomycin C in highly myopic eyes - Author reply
No full textOphthalmology. 2005 Feb;112(2):208-18; discussion 219.
Mitomycin C modulation of corneal wound healing after photorefractive keratectomy in highly myopic eyes.
Gambato C, Ghirlando A, Moretto E, Busato F, Midena E.
SourceRefractive Surgery Service and Antimetabolite Therapy Research Unit, Department of Ophthalmology, University of Padova, Padova, Italy.
Abstract
PURPOSE: To evaluate the role of topical mitomycin C in corneal wound healing (CWH) after photorefractive keratectomy (PRK) in highly myopic eyes.
DESIGN: Prospective, double-masked, randomized clinical trial.
PARTICIPANTS: Seventy-two eyes of 36 patients affected by high (>7 diopters) myopia.
METHODS: In each patient, one eye was randomly assigned to PRK with intraoperative topical 0.02% mitomycin C application, and the fellow eye was treated with a placebo. Postoperatively, mitomycin C-treated eyes received artificial tears (3 times daily, tapered in 3 months), whereas the fellow eye was treated with fluorometholone sodium 2% and artificial tears (3 times daily, tapered in 3 months).
MAIN OUTCOME MEASURES: Uncorrected visual acuity (UCVA) and best-corrected visual acuity (BCVA), contrast sensitivity, manifest refraction, and biomicroscopy. Contrast sensitivity was determined using the Pelli-Robson chart. Corneal confocal microscopy documented CWH.
RESULTS: Mean follow-up was 18 months (range, 12-36). No side effects or toxic effects were documented. At 12-month follow-up examination, UCVAs (logarithm of the minimum angle of resolution) were 0.4+/-0.48 and 0.5+/-0.53 (P = .03) in mitomycin C-treated eyes and corticosteroid-treated eyes, respectively. At 1 year, corneal haze developed in 20% of corticosteroid-treated eyes, versus 0% of mitomycin C-treated eyes. At 12, 24, and 36 months, corneal confocal microscopy showed activated keratocytes and extracellular matrix significantly more evident in untreated eyes (Ps = 0.004, 0.024, and 0.046, respectively).
CONCLUSION: Topical intraoperative application of 0.02% mitomycin C can reduce haze formation in highly myopic eyes undergoing PRK.
Comment in
Ophthalmology. 2006 Feb;113(2):357; author reply 357-8
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
A Multi-Language Comparison of Influences on Author Verification using Character N-Grams
No full textWe create a new multi-language corpus for author verification based on Wikipedia talkpages, and evaluate the influence that differences in topic and time have on character n-gram author profiles. Topic alignment between two texts is found to increase author verification precision, and an authors writing style is found to change over time, but not more significantly after 3 years than after 1 year.Information ArchitectureWISElectrical Engineering, Mathematics and Computer Scienc
A 0.12mm<sup>2</sup> Wien-Bridge Temperature Sensor with 0.1°C (3σ) Inaccuracy from -40°C to 180°C
No full text Resistor-based temperature sensors can achieve much higher resolution and energy efficiency than conventional BJT-based sensors [1], but they typically occupy more area (> 0.25 mm 2 ) and have lower operating temperatures (le 125 {circ} {C}) [2]-[4]. This work describes a 0.12mm 2 resistor-based sensor that uses a Wien-bridge (WB) filter to achieve 0.1 {circ} {C} (3 sigma) inaccuracy from - 40 {circ} {C} to 180 {circ} {C}. Compared to a state-of-the-art WB sensor [4], it occupies 6 × less area and achieves comparable relative accuracy over a 76% wider operating range. Session 10.3 Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
A ±25A Versatile Shunt-Based Current Sensor with 10kHz Bandwidth and ±0.25% Gain Error from -40°C to 85°C Using 2-Current Calibration
No full textAccurate current sensing is critical in many industrial applications, such as battery management and motor control. Precise shunt-based current sensors have been reported with gain errors of less than 1% over the industrial temperature range (-40°C to 85°C) [1]–[4]. However, since they are intended for coulomb counting, their bandwidth is limited to a few tens of Hz, making them unsuitable for battery impedance or motor-current sensing. This paper presents a current sensor with a wide (10kHz) bandwidth and a tunable temperature compensation scheme (TCS), which allows it to be flexibly used with different types of shunts while maintaining high accuracy. A low-cost room-temperature calibration scheme is proposed to optimize gain flatness over temperature by exploiting the shunt's self-heating at large currents. Over the industrial temperature range and a ±25A current range, it achieves state-of-the-art gain error (±0.25%) with both low-cost PCB and stable metal-alloy shunts.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic InstrumentationMicroelectronic
An Article About Albertus C. Van Raalte, Author Unknown, Except for Parts Taken from an Article by Anna C. Post
Get PDFAn article about Albertus C. Van Raalte, author unknown, except for parts taken from an article by Anna C. Post. The author knew first generation persons in the Holland settlement and therefore, the article has some value.https://digitalcommons.hope.edu/vrp_1890s/1012/thumbnail.jp
- …
