144,026 research outputs found
Going Beyond Counting First Authors in Author Co-citation Analysis
No full textThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
B-c meson production at the Tevatron revisited
No full text[[abstract]]CDF recently measured the quantity sigma(B-c(+))/sigma(B+) BR(B-c(+)-->J/psi l(+) upsilon)/BR(B+-->J/psi K+), from which we determine the ratio sigma(B+)/sigma((b) over bar) to be (2.08(-0.95)(+1.06)) X 10(-3). In this note, we show that the ratio sigma(B-c(+))/sigma((b) over bar) obtained by dividing the sigma(B-c(+)) by the leading order sigma((b) over bar) is consistent with this derived CDF measurement. We calculate the cross section sigma(B-c(+)) using the perturbative QCD fragmentation functions of Braaten, Cheung, and Yuan and the corresponding induced gluon fragmentation functions, with the charm-quark mass m(c) as a parameter. We also estimate the parameter m(c) from the CDF data and then predict the production rate at RunII.[[fileno]]2010134010034[[department]]物理
Dispelling the Myths Behind First-author Citation Counts
No full textWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
2016 ACR: B cell metabolism
No full text2016 ACR poster by Cheung et al describing the immunometabolism of CpG-stimulated mouse B cells
A systematic approach to atomicity decomposition in Event-B
No full textEvent-B is a state-based formal method that supports a refinement process in which an abstract model is elaborated towards an implementation in a step-wise manner. One weakness of Event-B is that control flow between events is typically modelled implicitly via variables and event guards. While this fits well with Event-B refinement, it can make models involving sequencing of events more difficult to specify and understand than if control flow was explicitly specified. New events may be introduced in Event-B refinement and these are often used to decompose the atomicity of an abstract event into a series of steps. A second weakness of Event-B is that there is no explicit link between such new events that represent a step in the decomposition of atomicity and the abstract event to which they contribute. To address these weaknesses, atomicity decomposition diagrams support the explicit modelling of control flow and refinement relationships for new events. In previous work, the atomicity decomposition approach has been evaluated manually in the development of two large case studies, a multi media protocol and a spacecraft sub-system. The evaluation results helped us to develop a systematic definition of the atomicity decomposition approach, and to develop a tool supporting the approach. In this paper we outline this systematic definition of the approach, the tool that supports it and evaluate the contribution that the tool makes
Pragmatic Case Studies as a Source of Unity in Applied Psychology
No full textTo unify or not to unify applied psychology: that is the question. In this article we review pendulum swings in the historical efforts to answer this question—from a comprehensive, positivist, “top-down,” deductive yes between the 1930s and the early 60s, to a postmodern no since then. A rationale and proposal for a limited, “bottom-up,” inductive yes in applied psychology is then presented, employing a case-based paradigm that integrates both positivist and postmodern themes and components. This paradigm is labeled “pragmatic psychology” and, its specific use of case studies, the “Pragmatic Case Study Method” (“PCS Method”). We call for the creation of peer-reviewed journal-databases of pragmatic case studies as a foundational source of unifying applied knowledge in our discipline. As one example, the potential of the PCS Method for unifying different angles of theoretical regard is illustrated in an area of applied psychology, psychotherapy, via the case of Mrs. B. The article then turns to the broader historical and epistemological arguments for the unifying nature of the PCS Method in both applied and basic psychology.Peer reviewe
Supplementary Table S3. Orthologous gene identification by blastp in B. deweyae B1 of the 24 most studied virulence factors reported by Nicholas Cheung et al. in 2020.
No full textSupplementary Table S3. Orthologous gene identification by blastp in B. deweyae B1 of the 24 most studied virulence factors reported by Nicholas Cheung et al. in 2020
A Review of silicon carbide development in MEMS applications
No full textDue to its desirable material properties, Silicon Carbide (SiC) hasbecome an alternative material to replace Si for MicroelectromechanicalSystems (MEMS) applications in harsh environments. To promote SiC MEMSdevelopment towards future cost-effective products, main technology areas inmaterial deposition and processes have attracted significant interest. Thedevelopments in these areas have contributed to the rapid emergence of SiCMEMS prototypes. In this paper, we give an overview of the importantdevelopments in SiC material formation and fabrication processes in recentyears. Some of the most interesting state-of-the-art SiC MEMS devices arereviewed. This highlights the major progresses in SiC MEMS developed thusfar. This paper also looks into the prospect of SiC MEMS drawing attention topotential issues
A comparative cradle-to-gate life cycle assessment of three concrete mix designs
No full textPurpose:
The concrete industry faces challenges to create concrete mix designs that reduce negative environmental impacts but also maintain high performance. This has led to ‘greener’ cementitious materials being developed which can decrease the use of traditional Portland cement (PC). This study intended to carry out a ‘cradle-to-gate’ life cycle assessment (LCA) on concrete mix designs containing different cementitious blends.
Methods:
The aim of this study was to obtain the overall environmental impact, with a particular focus on carbon dioxide (CO2) emissions of three concrete mix designs: CEM I (100 % PC content), CEM II/B-V (65 % PC content, 35 % Fly Ash (FA) content) and CEM III/B (30 % PC content, 70 % ground granulated blast furnace slag (GGBS) content). Evaluations of the three concrete mixes were performed using ‘SimaPro 8’ LCA software. A comparative cradle-to-gate LCA of these mixes has not currently been explored and could present a new insight into improving the environmental impact of concrete with the use of secondary materials. Recommendations from this work would help the industry make key decisions about concrete mix designs.
Results and discussion:
Results show that Mix 2 (CEM II/B-V) and Mix 3 (CEM III/B) could potentially be taken forwards to improve their environmental impacts of concrete production. With respect to optimum mix design, it is strongly recommended that GGBS is selected as the addition of choice for reducing CO2 emissions. FA does still considerably improve sustainability when compared to PC, but this work proved that inclusion of GGBS environmentally optimises the mix design even further. Advantages of using GGBS include lower CO2 emissions, a substantial reduction of environmental impacts and an increased scope for sustainability due to the higher PC replacement levels that are permitted for GGBS. Due to mix designs enabling a higher contribution of GGBS additions, it would also indicate an increased positive effect regarding waste scenarios.
Conclusions and recommendations:
The main contribution of this work demonstrated that concrete can be produced without loss of performance whilst significantly reducing the negative environmental impacts incurred in its production. The results obtained from this work would help to define the available options for optimising concrete mix design. The only material variations in each mix were the different cementitious blends. So, by determining the best option, a platform to make recommendations can be established based upon cementitious materials
Dr. Edwin Wright Collection: Author Unknown
No full textNotes - The author relates several short stories about his neighbours including Alex McDonell, homesteading and life around Meanook and Athabasca (1 page
- …
