1,720,981 research outputs found
Robotic colonoscopy: efficacy, tolerability and safety. Preliminary clinical results from a pilot study
No full textBACKGROUND: Robotic colonoscopy (RC) is a pneumatically-driven self-propelling platform (Endotics System®) able to investigate the colon, in order to reduce pain and discomfort. AIMS: (1) to describe the progress in gaining experience and skills of a trainee in RC; (2) to show the clinical outcomes of RC. METHODS: Pilot study. An experienced endoscopist started a training on RC whose progress was assessed comparing the results of 2 consecutive blocks of 27 (Group A) and 28 (Group B) procedures. CIR (Cecal Intubation Rate), CIT (Cecal Intubation Time) and Withdrawal Time (WT) were measured. Polyp Detection Rate (PDR), Adenoma Detection Rate (ADR) and Advanced Neoplasia Detection Rate (ANDR) were calculated. Possible adverse events were recorded. At the end of the procedure all patients completed a visual analog scale (VAS) to measure their perceived pain during RC and reported their willingness to repeat RC. RESULTS: General CIR was 92.7%, reaching 100% in Group B. Comparing the two groups, CIT significantly decreased from 55 to 22 min (p value 0.0007), whereas procedures with CIT ≤ 20 min increased (p value 0.037). WT significatively reduced from 21 to 16 min (p value 0.0186). PDR was 40% (males 62.5%, females 14.3%). ADR was 26.7% (males 27.5%, females 14.3%). Most of patients judged the procedure as mild or no distress, with high willingness-to-repeat the RC (92.7%). CONCLUSIONS: Our results about RC are encouraging as preliminary experience, with clear individual learning progress, accurate diagnosis in a painless or comfortable procedure and with possibility to remove polypoid lesions. Studies with larger populations are needed to confirm obtained results
Experimental Evaluation of Functional and Energy Performance of Pneumatic Oenological Presses for High Quality White Wines
Full text linkIn this article, experimental tests on two different kinds of pneumatic presses have been carried out in two Apulian wineries to evaluate energy consumption related to yield performance. The presses are employed to process Bombino Nero variety grapes, crushed and transformed in rosé wine though a pomace less process. The pneumatic pressured press realized a 2 h:48 min long process, with a maximum pressure on the product of 1.4 bar and a must moulding of 69% of extracted must. In regard to the vacuum press, the process duration is 3 h:18 min, with a maximum pressure of 0.9 bar and a must moulding of 58%. During the pressing operation, mean values of must flow rate are comparable: 2.1 L min−1 m−2 for the pressured press and 2.9 L min−1 m−2 for the vacuum press. However, a more detailed analysis gives more insight on the behaviour of the two presses. In regard to the pressured press, a compression phase characterized by few steps and at lowest pressure values has proven particularly effective, especially in the first phase (must moulding of 41% with a must flow rate of 4.6 L min−1 m−2), at the lowest pressure values. On the other hand, by analysing vacuum press process, the phases sequence is much more gradual, must moulding decreases as the extraction proceeds (from 28% to 6%), and in the last three phases a very low amount of must is extracted, with must moulding smaller than 10%. The energy consumption of the pressured press during compression is mainly related to the engine power absorption (one of the two in operation), and it is below 4 kW except during start-up, due to the starting currents. The highest power is reached in the last phase in which the maximum pressure is applied and a great amount of must is extracted. On the other hand, energy consumption in the vacuum press gradually decreases. A similar trend was not observed for the specific energy for either press: while it increases along the whole process for the vacuum press, it reaches a maximum value in the second phase of the pressured one. Results show the need to pursue new studies on single component design and on pressing cycles, especially in high-capacity pneumatic vacuum presses. Several advantages on wine production costs could be achieved, even retaining high quality wines
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Comparative Analysis of Ventilation Systems for Aging Salami
Full text linkThe aim of this study was to evaluate the influence of different ventilation systems in two aging cells. One cell featured transverse airflow starting from the top, while the other had a dual-flow
system with vertical air motion from top to bottom and vice versa. In addition to monitoring weight loss during aging, chemical and physical analyses were conducted on various salamis to assess the influence of ventilation both between the two aging cells and among different positions of the salamis within the same cell. It was found that the dual-evaporator (DEV) cell behaved better than transverse flow (TFL) cel
Modelling the Rheology of Olive Paste for Oil Extraction Plant Automation: Effects of the Crushing Process on the Rheology of Olive Pastes
Full text linkIn extra virgin olive oil production, it is essential to obtain a well-prepared olive paste which allows not only the extraction of the oil drops from the olives, but also the achievement of a high-quality oil while maintaining high yields. This work addresses the problem of determining the effect of three crushing machines on the viscosity of the olive paste: a hammer crusher, a disk crusher and a de-stoner were tested. The tests were repeated on both the paste leaving each machine and the paste to which water was added; this was done with the main aim of considering the different dilutions of the paste while entering the decanter. A power law and the Zhang and Evans model were used to analyse the rheological behaviour of the paste. The experimental results allow validation of the two models with a high (more than 0.9) coefficient of determination between experimental and numerical data. The results also show that the pastes obtained with the two classic crushing methods (hammers and disks) are almost identical, with a packing factor of about 17.9% and 18.6%, respectively. Conversely, the paste obtained with the de-stoner entails higher viscosity values and a smaller solid packing factor, of about 2.8%. At 30% dilution with water, the volume of the solid concentration dropped to about 11.6% for the hammer and disc crushers, while for the de-stoner it only reached 1.8%. This behaviour is also reflected in the evaluation of yields, which were 6% lower with the de-stoner. No significant differences regarding the legal parameters of oil quality were found using the three different crushing systems. Finally, this paper establishes some fundamental pillars in the research for an optimal model for identifying the rheological behaviour of the paste as a function of the crusher used. Indeed, since there is an increasing need for automation in the oil extraction process, these models can be of great help in optimizing this process
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
