1,720,962 research outputs found
NLOS Localization Exploiting Frequency-selective Metasurfaces
No full textThis paper introduces a new approach to localize user devices located in non-line-of-sight (NLOS) areas using a passive, non-reconfigurable, and frequency-selective metasurface called metaprism. By analyzing the spatial filtering of subcarriers in the orthogonal frequency division multiplexing (OFDM) signal transmitted by each user device, the base station can estimate the device's angle of view, distance, and subsequently its position. Two different criteria are proposed for designing the frequency response of the metaprism, depending on whether the users operate in the far-field or near-field region of the metaprism. Simulation results in the millimeter-wave band demonstrate that the system can achieve an accuracy of less than 2 degrees in angle estimation and in the order of decimeters in position estimation
Effect of Implant Angulation, Connection Length, and Impression Material on the Dimensional Accuracy of Implant Impressions: An In Vitro Comparative Study
No full textBACKGROUND:
With regard to implant-supported prostheses, to date no technique has been proven to guarantee a completely passive fit of prosthetic frameworks. Several clinical variables may affect the precision of impressions, particularly in the presence of implants.
PURPOSE:
To compare the accuracy of implant impressions made with different materials, lengths of impression coping connections, and not parallel position of the implants.
MATERIALS AND METHODS:
A calibrated testing device allowing reproducible standardized positions was used. Two control groups of master models and eight experimental groups with predetermined undercuts were used to make addition silicon and polyether implant impressions by means of the open-tray pick-up technique. Four reference distances were evaluated on each study cast by using a profile projector and a standardized measurement protocol. The data were statistically analyzed by means of three-factor analysis of variance.
RESULTS:
The impressions made in the presence of angulated implants were significantly less accurate than the ones made with parallel implants. The tested addition silicon resulted advantageous in presence of nonparallel implants whereas the polyether achieved the best results with parallel implants and standard impression copings.
CONCLUSIONS:
The angulation of the implants may cause strains of impressions, probably because of the higher forces required for the impression removal. Moreover, undercuts negatively affected the impression accuracy. More accurate casts were obtained using the tested addition silicon in the presence of nonparallel implants and using a standard length connection of the copings in the presence of parallel implants, respectively
Effect of 2 impression techniques on the dimensional accuracy of working implant prosthesis models: an in vitro study.
No full textPURPOSE:
Implant impressions and working models form integrated precision systems for registration and transmission of clinical data. The components of implant systems have a dimensional tolerance capable of introducing inaccuracies in the impression, thus in the prosthetic framework. This article aimed at comparing 2 repositioning impression techniques: one using impression copings (conventional technique) and the other using the final abutments as impression copings (interceptive technique).
MATERIALS AND METHODS:
Two experimental models, one with 4 parallel implants and the other with 4 nonparallel implants, were used to make silicone impressions. Twenty impressions were made with the conventional technique, and a further 20 were made with the interceptive technique. Three-dimensional images acquired with a three-dimensional scanner were measured using a three-dimensional image analysis software, comparing models obtained from the impressions with the experimental models. Data were statistically analyzed by means of confidence intervals calculated with the mean (α = 0.05), descriptive (box plot), and bivariate analyses.
RESULTS:
Statistic analysis highlighted significant differences among models obtained using both techniques: the interceptive technique generated working models with less distortion and variability.
CONCLUSIONS:
For internal-connection implants, the interceptive technique provided significantly more precise working models than did the conventional technique
Effect of 2 impression techniques on the dimensional accuracy of working implant prosthesis models: an in vitro study.
No full text
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Effect of implant angulation, connection length, and impression material on the dimensional accuracy of implant impressions: An in vitro comparative study
No full textBackground: With regard to implant-supported prostheses, to date no technique has been proven to guarantee a completely passive fit of prosthetic frameworks. Several clinical variables may affect the precision of impressions, particularly in the presence of implants. Purpose: To compare the accuracy of implant impressions made with different materials, lengths of impression coping connections, and not parallel position of the implants. Materials and Methods: A calibrated testing device allowing reproducible standardized positions was used. Two control groups of master models and eight experimental groups with predetermined undercuts were used to make addition silicon and polyether implant impressions by means of the open-tray pick-up technique. Four reference distances were evaluated on each study cast by using a profile projector and a standardized measurement protocol. The data were statistically analyzed by means of three-factor analysis of variance. Results: The impressions made in the presence of angulated implants were significantly less accurate than the ones made with parallel implants. The tested addition silicon resulted advantageous in presence of nonparallel implants whereas the polyether achieved the best results with parallel implants and standard impression copings. Conclusions: The angulation of the implants may cause strains of impressions, probably because of the higher forces required for the impression removal. Moreover, undercuts negatively affected the impression accuracy. More accurate casts were obtained using the tested addition silicon in the presence of nonparallel implants and using a standard length connection of the copings in the presence of parallel implants, respectively. © 2009, Copyright the Authors. Journal Compilation © 2010, Wiley Periodicals, Inc
- …
