206,694 research outputs found
Intern experience at CH���M Hill, Inc.: an internship report
No full textIncludes author's vita"Submitted to the College of Engineering of Texas A&M University in partial
fulfillment of the requirement for the degree of Doctor of Engineering."Includes bibliographical referencesA review of the author's internship experience with CH���M HILL, Inc.
during the period September 1975 through May 1976 is presented. During this nine month
internship the author worked as an Engineer II in the Industrial Processes discipline of this
large consulting engineering firm... The author's prime responsibility was as one of three
lead design engineers on the design of a large wastewater treatment facility for a pulp mill
in Hoquiam, Washington owned by ITT Rayonier Inc. The work generally consisted of the design
of individual treatment units and associated piping and pumping. The purpose of the project
was to provide wastewater treatment capabilities that would satisfy the effluent limitations
(standards) imposed upon the mill by the State of Washington Department of Ecology and the
U.S. Environmental Protection Agency. The author's assignment also entailed necessary
interaction with the project manager and other CH���M HILL design engineers and support staff
members, the client's representatives, and representatives of two other consulting engineering
firms working on the project. Thus, the internship position at CH���M HILL provided considerable
experience coordinating the author's work with the work of other engineers, guiding the design
and administrative efforts of a support staff, and interacting regularly with the client and
other consulting firms. This broad exposure to a variety of engineering and organizational
problems provided a valuable educational experience
Butt, Mrs D M & 3 Children & P-O Butt, [No Service Number]
No full textThis record was harvested from a previous catalogue system and will be withdrawn in 2025. Information in this record may be superseded or incomplete. Visit this record in UMA's new catalogue at: https://archives.library.unimelb.edu.au/nodes/view/375188Surname: BUTT
Given Name(s) or Initials: MRS D M & 3 CHILDREN & P-O BUTT
Military Service Number or Last Known Location: No Service Number
Missing, Wounded and Prisoner of War Enquiry Card Index Number: 13668187811
Item: [2016.0049.07496] "Butt, Mrs D M & 3 Children & P-O Butt, [No Service Number]
Simulation of thermal plant optimization and hydraulic aspects of thermal distribution loops for large campuses
No full textFollowing an introduction, the author describes Texas A&M University and its utilities system. After that, the author presents how to construct simulation models for chilled water and heating hot water distribution systems. The simulation model was used in a $2.3 million Ross Street chilled water pipe replacement project at Texas A&M University. A second project conducted at the University of Texas at San Antonio was used as an example to demonstrate how to identify and design an optimal distribution system by using a simulation model. The author found that the minor losses of these closed loop thermal distribution systems are significantly higher than potable water distribution systems. In the second part of the report, the author presents the latest development of software called the Plant Optimization Program, which can simulate cogeneration plant operation, estimate its operation cost and provide optimized operation suggestions. The author also developed detailed simulation models for a gas turbine and heat recovery steam generator and identified significant potential savings. Finally, the author also used a steam turbine as an example to present a multi-regression method on constructing simulation models by using basic statistics and optimization algorithms. This report presents a survey of the author??s working experience at the Energy Systems Laboratory (ESL) at Texas A&M University during the period of January 2002 through March 2004. The purpose of the above work was to allow the author to become familiar with the practice of engineering. The result is that the author knows how to complete a project from start to finish and understands how both technical and nontechnical aspects of a project need to be considered in order to ensure a quality deliverable and bring a project to successful completion. This report concludes that the objectives of the internship were successfully accomplished and that the requirements for the degree of Degree of Engineering have been satisfied
Morphological and physiological interactions of NG2-glia with astrocytes and neurons
No full textModels of central nervous system (CNS) function have historically been based on neurons and their synaptic contacts - the neuronal doctrine. This doctrine envisages glia as passive supportive cells. However, electrophysiological and imaging studies in brain slices show us that astrocytes, the most numerous cells in the brain, express a wide range of neurotransmitter receptors that are activated in response to synaptic activity. Furthermore, astrocytes communicate via calcium signals that are propagated over long distances by the release of 'gliotransmitters', the most abundant being adenosine triphosphate (ATP). This has led to the concept of the neuron-astroglial functional unit as the substrate of integration in the CNS. Recently, a novel glial cell type has been characterized by expression of the proteoglycan NG2. These NG2-glia receive presynaptic input from neurons and responds to neurotransmitters released at synapses. Now, studies on transgenic mice in which fluorescent proteins are specifically expressed by subclasses of glia are helping to address the question of where NG2-glia fit in the neuron-astroglial model of integrated brain function. NG2-glia, as well as astrocytes, have been shown to respond to neuronal and astroglial signals by raised intracellular calcium, which is a potential communications mechanism by which NG2-glia may be active partners in neuron-glial circuits. Moreover, a current concept of NG2-glia considers them to be 'neural stem cells' and an exciting prospect is that neuron-glial signalling may regulate the differentiation capacity of NG2-glia and their response to injury.</p
"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States" By M. Carey.
No full text"Reflections on the subject of Emigration from Europe with a view to Settlement in the United States: containing bried sketches of the moral and political character of those states.
By M. Carey, member of the American philosophical, and of the American Antiquarian Society, and author of The Olive Branch, Cindiciae Hibernicae, essays on banking, on political economy, and on internal improvement.
To which are now added the English editor's comments on the subject; together with Important Advice to Emigrants, and Cautions Against Impositions Practiced in the Outports
M-regularity and the fourier-mukai transform
No full textThis is a survey of M-regularity and its applications, expanding on lectures given by the second author at the Seattle conference, in August 2005, and at the Luminy workshop "Geometrie Algebrique Complexe", in October 2005
Butt fusion welding of polyethylene pipes
No full textThis thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The butt fusion process is extensively used in the joining of polyethylene (PE) pipes by the water and gas industries. This welding process although deceptively simple, is rather poorly understood, with much of the initial developments being of a rather empirical nature. The Water Research centre (WRc) have funded the present research in an attempt to optimise the welding of high pressure pipeline (PE100) systems. The main aims of this research were to investigate the effect of different welding conditions on the physical and mechanical properties of the joints produced and to investigate these effects on the micro- and macro-structures
of the joints produced. A series of welds were made using Eltex Tub 124 and Rigidex
002-50 pipes of 180mm diameter. The fusion pressure and heatsoak times were varied. A milling machine witha twin cutter arrangement was used to obtain the test specimens from around the circumference of the pipes. Differential scanning calorimetry was used to study the effect of sample
preparation methodology on the thermo-oxidative stability. Polarised light microscopy and image analysis were used to
study the macro- and micro-structural developments in the weld joint. Joint strength was evaluated via standard and
non-standard tensile test methods. Milling the samples to produce the test specimens was found to decrease significantly the thermo-oxidative resistance of the polymer. Reasons for this behaviour have been proposed. In order to achieve high quality thin films from microtomy, custom-made blades were used. This programme also developed the optimum polishing method for the microtomed blades. The macro-structure of the bead: its shape and dimensions were
found to be a function of temperature and pressure. Correlation was found between the bead geometry and the position around the circumference of the pipe. The macrostructures within the weld zone also showed this dependence on the position along the circumference of the pipe. An examination of the microstructures of each weld had shown the presence of five different zones. The feasibility of using microtomed thin sections in a tensile test was demonstrated. The test method provides a
means to study failure initiation and propagation in the tensile test specimen. Initial deformation was found to occur
in the centre of the melt-affected zone (MAZ) and the final failure occurs at the junction of the weld bead and the bulk
polymer. Tests on films without the weld bead showed that maximum deformation occurred at the centre of the sample
within the MAZ. The presence of the bead and the asymmetry in the test specimens caused by the welding process were found to have a
significant influence on the failure mode and the failure strain. The strain rate was also found to play a significant role in both beaded and debeaded samples. The failure was initiated from the pseudo notches in the beaded samples. In the debeaded sample the failure was within the MAZ
Minnesota State Fair Tickets Available at U of M Crookston Bookstore
No full textButt, Leanne; Tollefson, Elizabeth; Webster, Kathryn. (2007). Minnesota State Fair Tickets Available at U of M Crookston Bookstore. Retrieved from the University Digital Conservancy, https://hdl.handle.net/11299/221060
- …
