1,720,963 research outputs found

    Etude de la fissuration assistée par l'environnement des aciers peu alliés en situation de stockage géologique des déchets radioactifs

    No full text
    The aim of the work is to assess the susceptibility to environmental assisted cracking (EAC) of steels used for the deep geological storage of radioactive waste. The storage concept is based on the encapsulation of the waste in a carbon steel containers then placed in micro-tunnels drilled 500 meter deep in Clay. These micro-tunnels are built with a micro-alloyed casing steel. Recently, the storage concept has evolved with the injection of a cementitious bentonite grout between the clay and the casing to balance the potential acidity resulting from the excavation of the micro-tunnels and the gradual saturation of rock with water. Effect of this grout on the risk of corrosion and EAC is also evaluated in the PhD work. In the mild disposal environment considered (pH close to neutrality, low carbonate content), formation of a corrosion product scale composed of siderite and magnetite has been identified. This scale leads to a pseudo-passive state of both steel grades with thus a possible risk of EAC. The risk of EAC was thus first studied and a material selection for the disposal concept was thus first made accordingly. The protective nature of the siderite/magnetite corrosion scale was then studied and reproduced in laboratory using electrochemical techniques. This work allowed for the evaluation of the resistance of each selected steel with respect to general corrosion and EAC. The results did not underlined significant cracking susceptibility of the considered steel grades. Under deposit corrosion seems to be the main form of attack in aerated waste disposal environments but the influence of the presence of low oxygen levels has to be further explored.Le travail mené dans le cadre de cette thèse porte sur l’évaluation de la sensibilité à la fissuration assistée par l’environnement (FAE) d’aciers mis en œuvre pour le stockage géologique profond des déchets radioactifs selon un concept multi-barrières. On s’intéresse ici aux aciers faiblement alliés du conteneur et du chemisage qui seront placés dans des micro-tunnels creusés dans la roche à 500 mètres de profondeur. Le concept actuel prévoit un matériau de remplissage cimentaire entre l’argile et le chemisage afin de neutraliser l’acidité potentielle issue de la re-saturation en eau de la roche après le forage. Malgré la présence d’un milieu peu agressif (pH proche de la neutralité, faible teneur en carbonate), le choix des aciers a été dicté par leur sensibilité à la corrosion et à la FAE, qui est caractérisée dans ce travail. Les microstructures ferrito-perlitiques en bande ont ainsi été éliminées au profit de structures plus homogènes et deux aciers de référence ont été définis : l’API 5L X65 (ferrite-bainite) pour le chemisage et le P285NH (ferrite-perlite) pour le conteneur. Ces études ont également montré la formation de couches de produits de corrosion principalement composées de sidérite et de magnétite conférant une pseudo-passivité. Le caractère protecteur de ces couches vis-à-vis de la fissuration a été étudié et validé, sur la base d’une élaboration de couches représentatives par voie électrochimique. Enfin, les aciers de référence ont été caractérisés du point de vue de leur sensibilité à la corrosion et à la FAE en milieu cimentaire. Ils n’ont alors pas montré de sensibilité particulière du point de vue de la fissuration dans ces conditions, où la corrosion sous dépôt semble être la forme la plus présente en milieu aéré. Néanmoins, l’influence de la présence de faibles teneurs en oxygène dans le concept de stockage doit encore être explorée

    Study of environmental assisted cracking of carbon steels in radioactive wastes disposal conditions

    No full text
    Le travail mené dans le cadre de cette thèse porte sur l’évaluation de la sensibilité à la fissuration assistée par l’environnement (FAE) d’aciers mis en œuvre pour le stockage géologique profond des déchets radioactifs selon un concept multi-barrières. On s’intéresse ici aux aciers faiblement alliés du conteneur et du chemisage qui seront placés dans des micro-tunnels creusés dans la roche à 500 mètres de profondeur. Le concept actuel prévoit un matériau de remplissage cimentaire entre l’argile et le chemisage afin de neutraliser l’acidité potentielle issue de la re-saturation en eau de la roche après le forage. Malgré la présence d’un milieu peu agressif (pH proche de la neutralité, faible teneur en carbonate), le choix des aciers a été dicté par leur sensibilité à la corrosion et à la FAE, qui est caractérisée dans ce travail. Les microstructures ferrito-perlitiques en bande ont ainsi été éliminées au profit de structures plus homogènes et deux aciers de référence ont été définis : l’API 5L X65 (ferrite-bainite) pour le chemisage et le P285NH (ferrite-perlite) pour le conteneur. Ces études ont également montré la formation de couches de produits de corrosion principalement composées de sidérite et de magnétite conférant une pseudo-passivité. Le caractère protecteur de ces couches vis-à-vis de la fissuration a été étudié et validé, sur la base d’une élaboration de couches représentatives par voie électrochimique. Enfin, les aciers de référence ont été caractérisés du point de vue de leur sensibilité à la corrosion et à la FAE en milieu cimentaire. Ils n’ont alors pas montré de sensibilité particulière du point de vue de la fissuration dans ces conditions, où la corrosion sous dépôt semble être la forme la plus présente en milieu aéré. Néanmoins, l’influence de la présence de faibles teneurs en oxygène dans le concept de stockage doit encore être explorée.The aim of the work is to assess the susceptibility to environmental assisted cracking (EAC) of steels used for the deep geological storage of radioactive waste. The storage concept is based on the encapsulation of the waste in a carbon steel containers then placed in micro-tunnels drilled 500 meter deep in Clay. These micro-tunnels are built with a micro-alloyed casing steel. Recently, the storage concept has evolved with the injection of a cementitious bentonite grout between the clay and the casing to balance the potential acidity resulting from the excavation of the micro-tunnels and the gradual saturation of rock with water. Effect of this grout on the risk of corrosion and EAC is also evaluated in the PhD work. In the mild disposal environment considered (pH close to neutrality, low carbonate content), formation of a corrosion product scale composed of siderite and magnetite has been identified. This scale leads to a pseudo-passive state of both steel grades with thus a possible risk of EAC. The risk of EAC was thus first studied and a material selection for the disposal concept was thus first made accordingly. The protective nature of the siderite/magnetite corrosion scale was then studied and reproduced in laboratory using electrochemical techniques. This work allowed for the evaluation of the resistance of each selected steel with respect to general corrosion and EAC. The results did not underlined significant cracking susceptibility of the considered steel grades. Under deposit corrosion seems to be the main form of attack in aerated waste disposal environments but the influence of the presence of low oxygen levels has to be further explored

    Going Beyond Counting First Authors in Author Co-citation Analysis

    Get PDF
    The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed

    Etude de la fissuration assistée par l'environnement des aciers peu alliés en situation de stockage géologique des déchets radioactifs

    No full text
    The aim of the work is to assess the susceptibility to environmental assisted cracking (EAC) of steels used for the deep geological storage of radioactive waste. The storage concept is based on the encapsulation of the waste in a carbon steel containers then placed in micro-tunnels drilled 500 meter deep in Clay. These micro-tunnels are built with a micro-alloyed casing steel. Recently, the storage concept has evolved with the injection of a cementitious bentonite grout between the clay and the casing to balance the potential acidity resulting from the excavation of the micro-tunnels and the gradual saturation of rock with water. Effect of this grout on the risk of corrosion and EAC is also evaluated in the PhD work. In the mild disposal environment considered (pH close to neutrality, low carbonate content), formation of a corrosion product scale composed of siderite and magnetite has been identified. This scale leads to a pseudo-passive state of both steel grades with thus a possible risk of EAC. The risk of EAC was thus first studied and a material selection for the disposal concept was thus first made accordingly. The protective nature of the siderite/magnetite corrosion scale was then studied and reproduced in laboratory using electrochemical techniques. This work allowed for the evaluation of the resistance of each selected steel with respect to general corrosion and EAC. The results did not underlined significant cracking susceptibility of the considered steel grades. Under deposit corrosion seems to be the main form of attack in aerated waste disposal environments but the influence of the presence of low oxygen levels has to be further explored.Le travail mené dans le cadre de cette thèse porte sur l’évaluation de la sensibilité à la fissuration assistée par l’environnement (FAE) d’aciers mis en œuvre pour le stockage géologique profond des déchets radioactifs selon un concept multi-barrières. On s’intéresse ici aux aciers faiblement alliés du conteneur et du chemisage qui seront placés dans des micro-tunnels creusés dans la roche à 500 mètres de profondeur. Le concept actuel prévoit un matériau de remplissage cimentaire entre l’argile et le chemisage afin de neutraliser l’acidité potentielle issue de la re-saturation en eau de la roche après le forage. Malgré la présence d’un milieu peu agressif (pH proche de la neutralité, faible teneur en carbonate), le choix des aciers a été dicté par leur sensibilité à la corrosion et à la FAE, qui est caractérisée dans ce travail. Les microstructures ferrito-perlitiques en bande ont ainsi été éliminées au profit de structures plus homogènes et deux aciers de référence ont été définis : l’API 5L X65 (ferrite-bainite) pour le chemisage et le P285NH (ferrite-perlite) pour le conteneur. Ces études ont également montré la formation de couches de produits de corrosion principalement composées de sidérite et de magnétite conférant une pseudo-passivité. Le caractère protecteur de ces couches vis-à-vis de la fissuration a été étudié et validé, sur la base d’une élaboration de couches représentatives par voie électrochimique. Enfin, les aciers de référence ont été caractérisés du point de vue de leur sensibilité à la corrosion et à la FAE en milieu cimentaire. Ils n’ont alors pas montré de sensibilité particulière du point de vue de la fissuration dans ces conditions, où la corrosion sous dépôt semble être la forme la plus présente en milieu aéré. Néanmoins, l’influence de la présence de faibles teneurs en oxygène dans le concept de stockage doit encore être explorée

    Variations on the Author

    Get PDF
    “Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship

    Appropriate Similarity Measures for Author Cocitation Analysis

    Get PDF
    We provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis

    Dispelling the Myths Behind First-author Citation Counts

    Get PDF
    We conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more sophisticated methods

    Author Index

    No full text
    Nao informado

    koamabayili/VECTRON-author-checklist: VECTRON author checklist

    No full text
    We have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
    corecore