5,368 research outputs found
Preliminary design and optimization of a 20MW reference wind turbine
No full textWe use the capabilities of a multi-disciplinary design tool to provide a definition of a 20 MW wind turbine. Starting from an aero-elastic model obtained through a classic scaling procedure, we conduct an aero-structural optimization of the rotor through a staged redesign process, in which we optimize primary characteristics of the rotor including the blade shape, the solidity and a certain amount of native structural tailoring. The process is based on a series of parametric analysis, in order to assess the impact of a variation of macro design parameters on the fundamental performance of the turbine. The redesign activity shows remarkable advantages in terms of blade mass reduction and load alleviation, highlighting directions for the development and optimization of very large rotors
Comparison of some wind turbine noise emission models coupled to BEM aerodynamics
No full textNoise is an important design driver for onshore wind turbines. Therefore, there is a need to include validated noise prediction models within wind turbine and wind plant design procedures. However, the literature presents a multitude of dierent models and formulations, combined with a severe lack of publicly available experimental data. The present work presents a comparison between semi-empirical frequency-domain methods coupled to blade element momentum (BEM) aerodynamics, which is the typical approach used for the transient aeroelastic analysis of wind turbines. Among the various noise sources, only turbulent boundary layer { trailing edge and turbulent in ow noise models have been considered in the present analysis. The noise models are benchmarked in terms of emission spectra, highlighting dierences and discrepancies. A time-domain Ffowcs Williams-Hawkings formulation is also coupled to the same BEM model, investigating its ability in predicting low frequency emissions. Thanks to this study, a few inconsistencies among published noise models are identied and reported
Gravo-aeroelastic scaling of very large wind turbines to wind tunnel size
No full textThis work focuses on the design of wind turbine rotors of wind tunnel size that match the aerodynamic (for both rotor and wake) and aeroelastic behavior of multi-MW machines, including gravitational effects. The approach follows the classical definition of length, time and mass scaling ratios to respect nondimensional scaling parameters. The sub-scale model is obtained by a complete aero-structural re-design procedure, considering airfoils with similar polars at sub-scale Reynolds and the use of adequate materials. The approach is applied to the design of a sub-scale wind tunnel rotor that mimics the behavior of a 10 MW wind turbine. Results illustrate the main characteristics of the proposed method as well as its limitations, highlighting the challenges posed by representing a gravo-aeroelastic system at a much reduced scale
A study on the propagation of aero and wind uncertainties and their effect on the dynamic loads of a wind turbine
No full textThis work is concerned with the quantification of uncertainties associated with wind turbines. A part form the understanding of the Effects of uncertainties per se, the efficient propagation of uncertainties is necessary for the implementation of robust design optimization methods, which is one of our future goals. Among all possible sources of uncertainties, here uncertainties related to the incoming wind and to the aerodynamic characteristics of the blades are propagated throughout a high-fidelity multibody aeroservoelastic tool. Different techniques, which could all be used for propagating uncertainties other than the ones considered here, are tested and compared. These include different formulations from the family of Non-Intrusive Polynomial Chaos Expansion, as well as Ordinary and Universal Kriging. By running a reduced subset of standard design load cases, a comparison among the various methods is drawn in terms of accuracy and computational efficiency with respect to a standard Monte Carlo approach. It is concluded that, for the uncertain- ties considered here, all approaches lead to a significantly higher performance compared to Monte Carlo, with Universal Kriging slightly standing out. It is also observed that the output parameters exhibit significant variations, and this highlights the importance of a comprehensive framework for the quantification and propagation of uncertainties in wind energy systems
Integrated design optimization of wind turbines with noise emission constraints
No full textThis study integrates aeroacoustic noise emission models within a wind turbine design procedure to include overall sound pressure levels as design constraints. The proposed approach aims at the minimization of the cost of energy from wind, while ensuring the compliance with noise emission limits. The reference 3.35 MW onshore wind turbine developed within the international cooperation IEA Wind Task 37 is redesigned to reduce its noise emissions above and below rated wind speed, considering both single- and multi-objective design criteria. Results obtained with the proposed noise-constrained redesign methodology are compared with the simpler approach of reducing the tip speed without altering the blade shape. Results show that, while the simplistic approach causes a drop of −2.8% in annual energy production and a +2.5% increase in cost of energy, an optimized configuration fulfills the noise requirement without incurring into significant energy penalties
Open access self-archiving: An author study
No full textThis, our second author international, cross-disciplinary study on open access had 1296 respondents. Its focus was on self-archiving. Almost half (49%) of the respondent population have self-archived at least one article during the last three years. Use of institutional repositories for this purpose has doubled and usage has increased by almost 60% for subject-based repositories. Self-archiving activity is greatest amongst those who publish the largest number of papers. There is still a substantial proportion of authors unaware of the possibility of providing open access to their work by self-archiving. Of the authors who have not yet self-archived any articles, 71% remain unaware of the option. With 49% of the author population having self-archived in some way, this means that 36% of the total author population (71% of the remaining 51%), has not yet been appraised of this way of providing open access. Authors have frequently expressed reluctance to self-archive because of the perceived time required and possible technical difficulties in carrying out this activity, yet findings here show that only 20% of authors found some degree of difficulty with the first act of depositing an article in a repository, and that this dropped to 9% for subsequent deposits. Another author worry is about infringing agreed copyright agreements with publishers, yet only 10% of authors currently know of the SHERPA/RoMEO list of publisher permissions policies with respect to self-archiving, where clear guidance as to what a publisher permits is provided. Where it is not known if permission is required, however, authors are not seeking it and are self-archiving without it. Communicating their results to peers remains the primary reason for scholars publishing their work; in other words,
researchers publish to have an impact on their field. The vast majority of authors (81%) would willingly comply with a mandate from their employer or research funder to deposit copies of their articles in an institutional or subject-based repository. A further 13% would comply reluctantly; 5% would not comply with such a mandate
Progress of international hydrogen production network for the thermochemical Cu–Cl cycle
No full textThis paper presents recent advances by an international team which is developing the thermochemical copper–chlorine (Cu–Cl) cycle for hydrogen production. Development of the Cu–Cl cycle has been pursued by several countries within the framework of the Generation IV International Forum (GIF) for hydrogen production with the next generation of nuclear reactors. Due to its lower temperature requirements in comparison with other thermochemical cycles, the Cu–Cl cycle is particularly well matched with Canada's Generation IV reactor, SCWR (Super-Critical Water Reactor), as well as other heat sources such as solar energy or industrial waste heat. In this paper, recent developments of the Cu–Cl cycle are presented, specifically involving unit operation experiments, corrosion resistant materials and system integration.Atomic Energy of Canada LimitedOntario Research Excellence FundNatural Sciences and Engineering Research Council of CanadaUniversity Network of Excellence in Nuclear Engineering (UNENE)Canada Research Chairs progra
ŻYCIE UKRYTE W SŁOWIE. "BEKSIŃSCY. PORTRET PODWÓJNY" MAGDALENY GRZEBIAŁKOWSKIEJ W ŚWIETLE POSTSTRUKTURALIZMU
No full textLife Hidden in Words. Magdalena Grzebiałkowska\u27s "Beksińscy. Portret podwójny" and Poststructuralism
The article analyzes Magdalena Grzebiałkowska\u27s biographical "Beksińscy. Portret podwójny" which focuses on the lives of Zdzisław Beksiński and Tomasz Beksiński. The author looks at the construction of the biography and its relationship to poststructuralism, which allows for an appreciation of the literary features of the book. He points to how the specificity of the content, language, a mode of narration in Grzebiałkowska\u27s book make it a full-fledged literary work itself. As such the book departs from a typical biographical scheme. Juxtaposing the book with poststructural ideas leads to the reconsideration of the role of the author in the process of shaping of a biographical narrative
Systems, methods and devices for the capture and hydrogenation of carbon dioxide with thermochemical Cu—Cl and Mg—Cl—Na/K—CO2 cycles
No full textSystems, methods, and devices for producing hydrogen and capturing CO2 from emissions combine both H2 production and CO2 capture processes in forms of thermochemical cycles to produce useful products from captured CO2. The thermochemical cycles are copper-chlorine (Cu—Cl) and magnesium-chlorine-sodium/potassium cycles (Mg—Cl—Na/K—CO2). One system comprises a Cu—Cl cycle, a CO2 capture loop, and a hydrogenation cycle. Another system comprises an Mg—Cl—Na/K—CO2 cycle and a hydrogenation cycle. Devices for hydrogen production, CO2 capture, hydrogenation, and process and equipment integration include a two-stage fluidized/packed bed, hybrid two-stage spray-fluidized/packed bed reactor, a two-stage wet-mode absorber, a hybrid two-stage absorber, and a catalyst packed/fluidized bed reactor
Clean hydrogen production with the Cu–Cl cycle – Progress of international consortium, I: Experimental unit operations
No full textAdvancement of the thermochemical copper–chlorine (Cu–Cl) cycle for hydrogen production is reviewed and discussed in this paper. Individual unit operations and their linkage into an integrated cycle are being developed by a Canadian consortium, as part of the Generation IV International Forum (GIF) for hydrogen production with the next generation of nuclear reactors. This paper focuses on the consortium’s latest advances on the Cu–Cl cycle, particularly with respect to hydrogen production with Canada’s Generation IV reactor, called SCWR (Super-Critical Water Reactor). Other heat sources may also be utilized for the Cu–Cl cycle, such as solar energy or industrial waste heat. In this first of two companion papers, recent developments in Canada’s nuclear hydrogen program are reported, specifically unit operation experiments of the Cu–Cl cycle and system integration. The following second companion paper will present system modeling with Aspen Plus, corrosion resistant materials, thermochemistry, safety, and reliability aspects of the Cu–Cl cycle.Atomic Energy of Canada LimitedOntario Research Excellence FundNatural Sciences and Engineering Research Council of CanadaUniversity Network of Excellence in Nuclear Engineering (UNENE)Canada Research Chairs progra
- …
