1,721,001 research outputs found
Volatiles in magmas related to the Campanian Ignimbrite eruption. Experiments vs. natural findings
No full textThe solubility of H2O- and CO2-bearing fluids in trachytic and trachybasaltic melts from erupted magmas of the Campi Flegrei Volcanic District has been investigated experimentally at 1100 and 1200 °C, respectively, and at 100, 200, 300, 400, and 500 MPa. The solubility of H2O in the investigated melts varies between 3.48 ± 0.07 wt% at 100 MPa to 10.76 ± 0.12 wt% at 500 MPa in trachytic melts and from 3.49 ± 0.07 wt% at 100 MPa to 9.10 ± 0.11 wt% at 500 MPa in trachybasaltic melts. The content of dissolved CO2 in melts coexisting with the most CO2-rich fluid phase increases from 281 ± 24 ppm at 100 MPa to 2710 ± 99 ppm at 500 MPa in trachyte, and from 727 ± 102 ppm at 100 MPa to 3565 ± 111 ppm at 500 MPa in trachybasalt. Natural samples from the Campanian Ignimbrite eruption (trachyte) and from the Solchiaro eruption (trachybasalt) were collected around the city of Naples and on Procida Island. Deuterium/hydrogen (D/H) ratios were analyzed in natural pumices pre-heated at different temperatures to remove water adsorbed and/or imprinted by glass alteration processes. It has been determined that heating of the glass to 350 °C efficiently removes most of secondary water and the remaining concentrations represent primary magmatic water preserved in the erupted material. Hydrogen isotope composition (with δD values ranging between -70‰ and -110‰) and its correlation with bulk water content in selected pumice samples of the Campanian Ignimbrite eruption are consistent with isotopic fractionation between magmatic fluid and melt during degassing of erupting magma. Hence, the H2O and CO2 contents in natural glasses from pumice samples are considered as minimum estimates on volatile concentrations in the melt just prior to the eruption or at the fragmentation event. The water contents in natural glasses vary from 0.83 ± 0.07 to 3.74 ± 0.06 wt% for trachytes from the Campanian Ignimbrite eruption and from 1.96 ± 0.06 to 3.47 ± 0.07 wt% for trachybasalts from the Solchiaro eruption. The CO2 contents vary from 78 ± 120 ppm CO2 to 1743 ± 274 ppm for trachytes from the Campanian Ignimbrite eruption and from 240 ± 293 to 1213 ± 250 ppm for trachybasalts from the Solchiaro eruption. A combination of natural and experimental data provides minimum pressure estimates for the storage and ascent conditions of magmas. The Campanian Ignimbrite magma could have been stored or ponded during its rising path at two different levels: a deeper one corresponding to depth of about 8 to 15 km and a shallower one at about 1 to 8 km. Trachybasalts from Solchiaro erupted from the deepest level of about 11 km with a storage or ponding level at around 2 to 8 km depth. Although an uncertainty of at least a kilometer has to be considered in estimating storage or ponding depths, these estimates point to significantly deeper magmatic sources for both eruptions as those considered previously
Experimental and modeled chlorine solubilities in aluminosilicate melts at 1 to 7000 bars and 700 to 1250 °C. Applications to magmas of Augustine volcano, Alaska
No full textHydrothermal experiments were conducted at ca. 1 to 7000 bars and 700 to 1250 °C in 121 rhyolitic to basaltic systems to determine Cl solubility in silicate melts, i.e., the maximum Cl concentration in melts that are saturated in a hydrosaline liquid with or without an aqueous or aqueous-carbonic vapor. The Cl concentration of melts increases with the Cl contents of the fluid unless the melt coexists with vapor plus hydrosaline liquid at fixed pressure and temperature; this phase assemblage buffers the Cl content of each phase with increasing Cl in the system. The Cl content of fluid(s)-saturated melts is independent of the CO2 concentration of the saline liquid ± vapor with up to 21 wt% CO2 in the fluid(s). The experiments show that Cl dissolution in aluminosilicate melts increases with temperature and pressure. Chlorine solubility is also a function of melt composition; it increases with the molar ([Al1/2+Ca1/2+Mg1/2+Na]/Si) of the melt. These experimental data have been integrated with results involving 41 other experiments (Webster and De Vivo 2002) to develop a broadly expanded model that supports calculation of Cl solubility in 163 aluminosilicate melts. This empirical model applies to Cl dissolution in melts of most silicate magmas at depths as great as 25 km. It determines the exsolution of hydrosaline liquid, with or without a coexisting vapor, as magmas ascend from depth, cool, crystallize, and differentiate from mafic to felsic compositions. In combination with H2O solubility models, our model supports determination of H2O-Cl solubility relations for most aluminosilicate magmas and is useful for barometric estimations based on silicate melt inclusions containing low CO2 and moderate to high-Cl concentrations. The model is applied to the phase relations of fluids in volatile-enriched magmas of Augustine volcano, Alaska. The Cl and H2O concentrations of melt inclusions from 14, basaltic to dacitic eruptive units are compared with modeled solubilities of Cl and H2O in Augustine melts. The majority of these eruptions involved magmas that first exsolved aqueous to aqueous-carbonic vapors when the melts were dacitic in composition (i.e., before the residual melts in these magmas had evolved to felsic compositions) and well prior to the eruptions. Hydrosaline liquid with or without a vapor phase exsolved from other, more-felsic fractions of Augustine melts at low, near-surface pressures of several tens of bars. © 2015 by Walter de Gruyter Berlin/Boston 2015
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Solubility of C-O-H mixturesin natural melts: new experimental data and application range of recent models
No full textThe effect of pressure, temperature, and melt composition on CO2 and H2O solubilities in aluminosilicate
melts, coexisting with CO2-H2O fluids, is discussed on the basis of previously published and new experimental
data. The datasets have been chosen so that CO2 and H2O are the main fluid components and the conclusions
are only valid for relatively oxidizing conditions. The most important parameters controlling the solubilities
of H2O and CO2 are pressure and composition of melt and fluid. On the other hand, the effect of temperature
on volatile solubilities is relatively small. At pressures up to 200 MPa, intermediate compositions
such as dacite, in which both molecular CO2 and carbonate species can be dissolved, show higher volatile
solubilities than rhyolite and basalt. At higher pressures (0.5 to 1 GPa), basaltic melts can incorporate higher
amounts of carbon dioxide (by a factor of 2 to 3) than rhyolitic and dacitic melts. Henrian behavior is observed
only for CO2 solubility in equilibrium with H2O-CO2 fluids at pressures <100 MPa, whereas at higher
pressures CO2 solubility varies nonlinearly with CO2 fugacity. The positive deviation from linearity with
almost constant CO2 solubility at low water activity indicates that dissolved water strongly enhances the solubility
of CO2. Water always shows non-Henrian solubility behavior because of its complex dissolution
mechanism (incorporation of OH-groups and H2O molecules in the melt). The model of Newman and Lowenstern
(2002), in which ideal mixing between volatiles in both fluid and melt phases is assumed, reproduces
adequately the experimental data for rhyolitic and basaltic compositions at pressures below 200 MPa but
shows noticeable disagreement at higher pressures, especially for basalt. The empirical model of Liu et al.
(2004) is applicable to rhyolitic melts in a wide range of pressure (0-500 MPa) and temperature (700-
1200°C) but cannot be used for other melt compositions. The thermodynamic approach of Papale (1999) allows
to calculate the effect of melt composition on volatile solubilities but needs an update to account for
more recent experimental data. A disadvantage of this model is that it is not available as a program code. The
review indicates a crucial need of new experimental data for scarcely investigated field of pressures and fluid
compositions and new models describing evident non-ideality of H-C-O fluid solubility in silicate melts
at high pressures.PublishedJCR Journalope
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
