1,720,966 research outputs found
Development of a new approach for the kinetic modeling of the lithium reactive hydride composite (Li-RHC) for hydrogen storage under desorption conditions
No full textAmong some promising candidates for high-capacity energy and hydrogen storage is the Lithium-Boron Reactive Hydride Composite System (Li-RHC: 2 LiH + MgB2/2 LiBH4 + MgH2). This system desorbs hydrogen only at relatively high temperatures and presents a two-step series of reactions occurring in different time scales: first, MgH2 desorbs, followed by LiBH4. Hitherto, the dehydrogenation kinetic behavior of such a system has been described for different temperatures at specific values of operative pressure. However, a comprehensive model representing its dehydrogenation kinetic behavior under different operative conditions has not yet been developed. Herein, the separable variable method is applied to develop a comprehensive kinetic model, including the two-step dehydrogenation series reaction. The MgH2 decomposition is described with the one-dimensional interface-controlled reaction rate Johnson-Mehl-Avrami-Erofeyev-Kholmogorov (JMAEK) with a (Pequilibrium/Poperative) pressure functionality and an Arrhenius temperature dependence activation energy of 63 ± 3 kJ/mol H2. The LiBH4 decomposition is modeled applying the autocatalytic Prout-Tompkins model. A novel approach to describe the Prout-Tompkins t0 parameter as a function of the operative temperature and pressure model is proposed. This second reaction step presented a (Pequilibrium – Poperative/Pequilibrium)2 pressure dependence and an Arrhenius temperature dependence with activation energy 94 ± 13 kJ/mol H2. The proposed approach is experimentally and computationally validated, successfully describing the decomposition kinetic behavior of MgH2 and LiBH4 under three-phase gas, liquid and solid environment and shows good agreement between experimental and modeled curves
Changing the dehydrogenation pathway of LiBH4-MgH2via nanosized lithiated TiO2
Get PDFNanosized lithiated titanium oxide (LixTiO2) noticeably improves the kinetic behaviour of 2LiBH4 + MgH2. The presence of LixTiO2 reduces the time required for the first dehydrogenation by suppressing the intermediate reaction to Li2B12H12, leading to direct MgB2 formation.Fil: Puszkiel, Julián Atilio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; ArgentinaFil: Castro Riglos, Maria Victoria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte; Argentina. Comisión Nacional de Energía Atómica. Centro Atómico Bariloche; ArgentinaFil: Karimi, F.. Helmholtz-zentrum Geesthacht; AlemaniaFil: Santoru, A.. Helmholtz-zentrum Geesthacht; AlemaniaFil: Pistidda, C.. Helmholtz-zentrum Geesthacht; AlemaniaFil: Klassen, T.. Helmholtz-zentrum Geesthacht; AlemaniaFil: Bellosta von Colbe, J. M.. Helmholtz-zentrum Geesthacht; AlemaniaFil: Dornheim, M.. Helmholtz-zentrum Geesthacht; Alemani
A Novel Emergency Gas-to-Power System Based on an Efficient and Long-Lasting Solid-State Hydride Storage System: Modeling and Experimental Validation
Get PDFIn this paper, a gas-to-power (GtoP) system for power outages is digitally modeled and experimentally developed. The design includes a solid-state hydrogen storage system composed of TiFeMn as a hydride forming alloy (6.7 kg of alloy in five tanks) and an air-cooled fuel cell (maximum power: 1.6 kW). The hydrogen storage system is charged under room temperature and 40 bar of hydrogen pressure, reaching about 110 g of hydrogen capacity. In an emergency use case of the system, hydrogen is supplied to the fuel cell, and the waste heat coming from the exhaust air of the fuel cell is used for the endothermic dehydrogenation reaction of the metal hydride. This GtoP system demonstrates fast, stable, and reliable responses, providing from 149 W to 596 W under different constant as well as dynamic conditions. A comprehensive and novel simulation approach based on a network model is also applied. The developed model is validated under static and dynamic power load scenarios, demonstrating excellent agreement with the experimental results
Compaction pressure influence on material properties and sorption behaviour of LiBH4-MgH2 composite
Get PDFAmong different Reactive Hydride Composites (RHCs), the combination of LiBH4 and MgH2 is a promising one for hydrogen storage, providing a high reversible storage capacity. During desorption of both LiBH4 and MgH2, the formation of MgB2 lowers the overall reaction enthalpy. In this work, the material was compacted to pellets for further improvement of the volumetric hydrogen capacity. The influence of compaction pressure on the apparent density, thermal conductivity and sorption behaviour for the Li-based RHC during cycling was investigated for the first time. Although LiBH4 melts during cycling, decrepitation or disaggregation of the pellets is not observed for any of the investigated compaction pressures. However, a strong influence of the compaction pressure on the apparent hydrogen storage capacity is detected. The influence on the reaction kinetics is rather low. To provide explanations for the observed correlations, SEM analysis before and after each sorption step was performed for different compaction pressures. Thus, the low hydrogen sorption in the first cycles and the continuously improving sorption for low pressure compacted pellets with cycling may be explained by some surface observations, along with the form stability of the pellets
Modeling the kinetic behavior of the Li-RHC system for energy-hydrogen storage: (I) absorption
Get PDFThe Lithium–Boron Reactive Hydride Composite System (Li-RHC) (2 LiH + MgB2/2 LiBH4 + MgH2) is a high-temperature hydrogen storage material suitable for energy storage applications. Herein, a comprehensive gas-solid kinetic model for hydrogenation is developed. Based on thermodynamic measurements under absorption conditions, the system's enthalpy ΔH and entropy ΔS are determined to amount to −34 ± 2 kJ∙mol H2−1 and −70 ± 3 J∙K−1∙mol H2−1, respectively. Based on the thermodynamic behavior assessment, the kinetic measurements' conditions are set in the range between 325 °C and 412 °C, as well as between 15 bar and 50 bar. The kinetic analysis shows that the hydrogenation rate-limiting-step is related to a one-dimensional interface-controlled reaction with a driving-force-corrected apparent activation energy of 146 ± 3 kJ∙mol H2−1. Applying the kinetic model, the dependence of the reaction rate constant as a function of pressure and temperature is calculated, allowing the design of optimized hydrogen/energy storage vessels via finite element method (FEM) simulations
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
