1,720,960 research outputs found
Empirical measurements of small unmanned aerial vehicle co-axial rotor systems
No full textSmall unmanned aerial vehicles (SUAV) are beginning to dominate the area of intelligence, surveillance, target acquisition and reconnaissance (ISTAR) in forward operating battlefield scenarios. Of particular interest are vertical take-off and landing (VTOL) variants. Within this category co-axial rotor designs have been adopted due to their inherent advantages of size and power to weight ratio. The inter-rotor spacing attribute of a co-axial rotor system appears to offer insight into the optimum design characteristic. The H/D ratio has been cited as a significant factor in many research papers, but to date has lacked an empirical value or an optimal dimensionless condition. In this paper the H/D ratio of a SUAV has been explored thoroughly, reviewing the performance of these systems at incremental stages, the findings from this study have shown that a range of H/D ratios in the region of (0.41-0.65) is advantageous in the performance of SUAV systems. This finding lends itself to the theory of inter-rotor spacing as a non-dimensionally similar figure, which cannot be applied across a spectrum of systems; this could be attributed to the viscous losses of flight at low Reynolds Numbers (< 50,000
Optimizing performance variables for small unmanned aerial vehicle co-axial rotor systems
Get PDFThe aim of this project was to design and build a test-rig that is capable of analyzing small unmanned aerial vehicles (SUAV) co-axial rotor systems. The intention of the test-rig development was to highlight important aeromechanical components and variables that dictate the co-axial units flight performance, with the intention of optimizing the propulsion systems for use on HALO® a co-axial SUAV designed by the Autonomous Systems Lab at Middlesex University. The major contributions of this paper are: an optimum COTS co-axial configuration with regards to motor and propeller variations, a thorough review and validation of co-axial rotor systems inter-rotor spacing which in turn identified an optimum H/D ratio region of between (0.41–0.65
Development of a test-rig for exploring optimal conditions of small unmanned aerial vehicle co-axial rotor systems
No full textDue to the recent increase in development and use of co-axial rotor system at the scale of small UAVs a greater understanding of the performance variables that affect the co-axial propulsion system at low Reynolds number operation has become increasingly apparent when optimizing such systems. This paper focuses on and details the development and fabrication of a small UAV co-axial rotor system test-rig, and investigations into the optimal inter-rotor spacing range between contra-rotating rotors. An integrated test-rig has been specifically designed for the testing and analysis of commercial off-the-shelf (COTS) propellers and out-runner motors which are predominantly used in SUAV propulsion systems. The test-rig incorporates linear motion, yaw, force and other performance measurements, to help validate the identified core co-axial rotor system performance attributes. The co-axial test-rig was used to investigate co-axial rotor systems inter-rotor spacing which identified an optimum H/D ratio region of (0.41 – 0.65
Developing a low-cost beer dispensing robotic system for the service industry
No full textAs the prices of commercially available electronic and mechanical components decrease, manufacturers such as Devantech and Revolution Education have made encoded motor controller systems and microcontrollers very accessible to engineers and designers. This has made it possible to design sophisticated robotic and mechatronic systems very rapidly and at relatively low cost. A recent project in the Autonomous Systems Lab at Middlesex University, UK was to design and build a small, automated, robotic bartender based around the 5 litre Heineken 'Draughtkeg' system, which is capable of patrolling a bar and dispensing beer when signalled to by a customer. Because the system was designed as a commercial product, design constraints focused on keeping the build cost down, and so electronic components were sourced from outside companies and interfaced with a bespoke chassis and custom mechanical parts designed and manufactured on site at the University. All the programming was conducted using the proprietary BASIC language, which is freely available from the PicAXE supplier at no cost. This paper will discuss the restrictions involved in building a robot chassis around 'off-theshelf' components, and the issues arising from making the human-machine interaction intuitive whilst only using low-cost ultrasonic sensors. Programming issues will also be discussed, such as the control of accuracy when interfacing a PicAXE microcontroller with a Devantech MD25 Motor Controller board. Public live testing of the system was conducted at the Kinetica Art Fair 2010 event in London and has since been picked up by websites such as Engadget.com and many others. Feedback on the system will be described, as well as the refinements made as a result of these test
Design and development of a pole climbing surveillance robot
No full textThe cost of installing, monitoring and servicing a fixed camera system can be high and not all areas are in need of constant surveying. The increase in crime in urban areas emphasizes the need for a more effective and efficient surveillance system, as a result could lead to fewer crimes. A temporary surveillance unit which is able to climb to gain an elevated view has great potential for both military and civilian application. This paper highlights how the patent pending climbing robotic system (PC-101) was developed to be used by London’s Metropolitan Police Forensic Department for analysing outdoor crime scenes especially that related to car accidents. When cars are involved in accidents in the Metropolitan area, depending on the scale of the incident, the road generally has to be shut off to traffic if there are serious casualties. Elevated images are required for cases which may be taken to court, which then the images are then used as evidence, therefore regulations on the quality and perspectives of the image have to be met. By climbing a range of existing street furniture such as street lamp post, a temporary platform eliminates the use of larger special vehicle which struggles to get to the crime scene as well as cuts down the duration of the road closure. 98% of London street lamps in the Metropolitan area are constructed out of steel structures which make the use of magnetic wheels for locomotion an ideal solution to the climbing problem. Once remote controlled to the top of the lamp post, the PC-101 makes use of its actuated camera arm/gimbal to take the required shot, which can be seen on the ground control unit. A surveillance tool of this sort can be used for many applications which include crowd/riot control, crime scene investigations, monitoring hostile environments and even the monitoring of nature within urban environment
Heineken bot [a robot installation presented at the Kinetic Art Fair 2010]
No full textStudents from Middlesex University’s Product Design and Engineering Department have designed the ultimate drinks dispenser – the ‘Heineken Bot’, an automated robot, which can pour pints right in front of you! The Robot, a beer keg mounted on driveable wheels, has a specially programmed electronic brain which directs it to move along a specific route. By placing your hand above the Bot, a sensor is activated, which stops the device – you then place a glass under the keg tap, the Bot pours out your drink and moves on to its next customer! It could be the perfect solution for those tense moments ahead during this summer’s World Cup – no danger of missing that crucial penalty shoot-out
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
- …
