1,720,968 research outputs found
Development of diagnostic instrumentations for fuel cells based on consumer electronics
Full text linkThe decarbonization process is pushing the energy sector into a transition towards clean energy vectors. In the hard-to-abate sectors, such as heavy-duty transport and industry, hydrogen can act as an energy carrier and a sector coupler. Key devices for hydrogen exploitation are fuel cells. Diagnostic is a crucial element for safety and efficiency during operation. This work regards the development process – from the conception to the validation and use – of an acquisition system made of consumer electronic components. By measuring differential voltage at high frequency, it enables to perform Electrochemical Impedance Spectroscopy (EIS). The system consists of an Arduino board running a self-developed circuit composed of an operational amplifier, an analog-to-digital converter, and a buffer memory. The system is designed to be expanded with multiple synchronized modules to monitor several cells at once. The module can be applied to a single cell or a group of cells (e.g., a stack) by tuning the operational amplifier. A dedicated software has also been developed, involving assembly language to achieve the required speed performance. The circuit has been validated using a function generator to apply sinusoids with frequencies between 100 Hz and 10 kHz and amplitudes of 10-500 mV (reflecting the EIS requirements on a single cell). An oscilloscope is used to double-check the generated signal. The results proved that the system features errors below 3% on amplitude and below 0.3% on frequency. Finally, the developed system has been tested against a commercial device performing EIS measurements. The obtained impedance values generally differ by less than 3% in the range of interest, while a few specific frequencies are affected by external disturbances
Numerical analysis of NOx production within a hydrogen catalytic combustor
Full text linkHydrogen combustion reactions produce nitrogen oxides as a byproduct. They can be reduced by exploiting the catalytic combustion of hydrogen in a monolith. However, some nitrogen oxides can still be produced in the gas-phase of the catalytic combustor. The present work numerically investigates the production of nitrogen oxides as a by-product of the combustion of a lean air-hydrogen mixture in a catalytic monolith with an equivalence ratio lower than 0.3. The analysis is carried out with a 2D dynamic numerical model implemented in MATLAB. The model solves mass and energy balances in a domain describing a single channel of the monolith. The model involves a detailed reaction mechanism for the gas-phase combustion, including the subsets that model the production of nitrogen oxides. As a result, the model indicates that the catalytic combustor does not produce nitrogen oxides with an inlet hydrogen fraction lower than 9%vol. Furthermore, the maximum value of nitrogen oxide at the outlet of the channel is lower than 0.4 ppm, obtained with the highest hydrogen fraction simulated in this work (12%vol inlet hydrogen fraction)
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Experimental Determination of the Performances during the Cold Start-Up of an Air Compressor Unit for Electric and Electrified Heavy-Duty Vehicles
Full text linkCompressed air is crucial on an electric or electrified heavy-duty vehicle. The objective of this work was to experimentally determine the performance parameters of the first prototype of an electric-driven sliding-vane air compressor, specifically designed for electric and electrified heavy-duty vehicles, during the transient conditions of cold start-ups. The transient was analyzed for different thermostatic temperatures: 0 °C, −10 °C, −20 °C, and −30 °C. The air compressor unit was placed in a climatic chamber and connected to the electric grid, the water-cooling loop, and the compressed air measuring and controlling rig. The required start-up time was greater the lower the thermostatic temperature, ranging from 30 min at 0 °C to 221 min at −30 °C and depending largely on the volume of the lubricant oil filled initially. The volume flow rate of the compressed air was lower than nominal at the beginning, but it showed a step increase well beyond nominal when the oil reached 50 °C and then decreased gently towards nominal, while the input power kept steady at nominal after a short initial peak. These facts must be considered when estimating the time and the energy required by the air compressor unit to fill up the compressed air tanks of the vehicles
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
