1,720,991 research outputs found
Local Piezoelectric Response of Polymer/Ceramic Nanocomposite Fibers
Full text linkEffective converse piezoelectric coefficient (d33,eff) mapping of poly(vinylidene fluoride) (PVDF) nanofibers with ceramic BaTiO3 nanoparticle inclusions obtained by electrospinning was carried out by piezoresponse force microscopy (PFM) in a peculiar dynamic mode, namely constant-excitation frequency-modulation (CE-FM), particularly suitable for the analysis of compliant materials. Mapping of single nanocomposite fibers was carried out to demonstrate the ability of CE-FM-PFM to investigate the nanostructure of semicrystalline polymers well above their glass transition temperature, such as PVDF, by revealing the distribution of piezoelectric activity of the nanofiber, as well as of the embedded nanoparticles employed. A decreased piezoelectric activity at the nanoparticle site compared to the polymeric fiber was found. This evidence can be rationalized in terms of a tradeoff between the dielectric constants and piezoelectric coefficients of the component materials, as well as on the mutual orientation of polar axes
Interpenetrating and semi-interpenetrating network superabsorbent hydrogels based on sodium alginate and cellulose nanocrystals: A biodegradable and high-performance solution for adult incontinence pads
No full textSuperabsorbent hydrogels (SAHs) are essential in various applications, including hygienic products like adult incontinence pads. However, synthetic-based super absorbent polymers (SAPs) dominate the market despite being non-biodegradable. Alternatively, bio-based hydrogels, such as sodium alginate (SA)-based hydrogels, offer biodegradable alternatives. In this study, we aimed to enhance the practical applied properties of SA-based hydrogels by grafting SA with acrylic acid (AA) and incorporating cellulose nanocrystals (CNCs). Specifically, we investigated the potential of interpenetrating network (IPN) and semi-interpenetrating network (S-IPN) hydrogels as absorbent materials in adult incontinence pads. The fabricated SAHs were characterized by Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). They were also evaluated for absorption and rheological properties. The results showed that in IPN/SAHs, the addition of CNCs decreased pore sizes, while in S-IPN/SAHs, CNC incorporation increased pore sizes. The S-IPN/SAHs exhibited a significantly higher free swelling capacity (FSC) with CNCs loading, reaching 142.29 g/g in 0.9 % NaCl solution and 817.4 g/g in distilled water. On the other hand, IPN/SAHs showed a higher storage modulus and lower loss modulus compared to S-IPN/SAHs. Notably, the superior samples from this study showed a 33 % reduction in SAP consumption compared to commercial SAPs, making them more cost-effective for adult incontinence pad manufacturers. Overall, our research demonstrates the potential of interpenetrating and semi-interpenetrating network superabsorbent hydrogels as high-performance absorbent materials. The results offer improved absorbency and cost savings for producers of adult incontinence pads, and bio-based hydrogels like SA-based hydrogels are promising biodegradable alternatives to synthetic-based SAPs
Self‐Powered Nanostructured Piezoelectric Filaments as Advanced Transducers for New Cochlear Implants
Full text linkThe conversion of sound vibration into electrical potential is a critical function performed by cochlear hair cells. Unlike the regenerative capacity found in various other cells throughout the body, cochlear sensory cells lack the ability to regenerate once damaged. Furthermore, a decline in the quantity of these cells results in a deterioration of auditory function. Piezoelectric materials can generate electric charge in response to sound wave vibration, making them theoretically suitable for replacing hair cell function. This study explores an innovative approach using piezoelectric nanocomposite filaments, namely poly(vinylidene fluoride), poly(vinylidene fluoride)/barium titanate, and poly(vinylidene fluoride)/reduced graphene oxide, as self-powered acoustic sensors designed to function in place of cochlear hair cells. These flexible filaments demonstrate a unique ability to generate electricity in response to frequency sounds from 50 up to 1000 Hz at moderate sound pressure levels (60-95 dB), approaching the audible range with an overall acoustoelectric energy conversion efficiency of 3.25%. Serving as self-powered acoustic sensors, these flexible filaments hold promise for potential applications in cochlear implants, with a high sensitivity of 117.5 mV (Pacm2)-1. The cytocompatibility of these filaments was assessed through in vitro viability tests conducted on three cell lines, serving as a model for inner ear cells.This article explores new material formulations for treating sensorineural hearing loss, an often-irreversible condition with significant psychosocial impacts. Currently, cochlear implants (CIs) are the only treatment, but they are expensive and require invasive surgery. Our approach involves self-powered acoustic transducer fibers to develop biomaterial-based CIs, eliminating the need for electronics. imag
Liver Cancer: Current and Future Trends Using Biomaterials
Full text linkHepatocellular carcinoma (HCC) is the fifth most common type of cancer diagnosed and the second leading cause of death worldwide. Despite advancement in current treatments for HCC, the prognosis for this cancer is still unfavorable. This comprehensive review article focuses on all the current technology that applies biomaterials to treat and study liver cancer, thus showing the versatility of biomaterials to be used as smart tools in this complex pathologic scenario. Specifically, after introducing the liver anatomy and pathology by focusing on the available treatments for HCC, this review summarizes the current biomaterial-based approaches for systemic delivery and implantable tools for locally administrating bioactive factors and provides a comprehensive discussion of the specific therapies and targeting agents to efficiently deliver those factors. This review also highlights the novel application of biomaterials to study HCC, which includes hydrogels and scaffolds to tissue engineer 3D in vitro models representative of the tumor environment. Such models will serve to better understand the tumor biology and investigate new therapies for HCC. Special focus is given to innovative approaches, e.g., combined delivery therapies, and to alternative approaches-e.g., cell capture-as promising future trends in the application of biomaterials to treat HCC
Piezoelectric Yield of Single Electrospun Poly(acrylonitrile) Ultrafine Fibers Studied by Piezoresponse Force Microscopy and Numerical Simulations
Full text linkQuantitative converse piezoelectric coefficient (d33) mapping of polymer ultrafine fibers of poly(acrylonitrile) (PAN), as well as of poly(vinylidene fluoride) (PVDF) as a reference material, obtained by rotating electrospinning, was carried out by piezoresponse force microscopy in the constant-excitation frequency-modulation mode (CE-FM-PFM). PFM mapping of single fibers reveals their piezoelectric activity and provides information on its distribution along the fiber length. Uniform behavior is typically observed on a length scale of a few micrometers. In some cases, variations with sinusoidal dependence along the fiber are reported, compatibly with a possible twisting around the fiber axis. The observed features of the piezoelectric yield have motivated numerical simulations of the surface displacement in a piezoelectric ultrafine fiber concerned by the electric field generated by biasing of the PFM probe. Uniform alignment of the piezoelectric axis along the fiber would comply with the uniform but strongly variable values observed, and sinusoidal variations were occasionally found on the fibers laying on the conductive substrate. Furthermore, in the latter case, numerical simulations show that the piezoelectric tensor’s shear terms should be carefully considered in estimations since they may provide a remarkably different contribution to the overall deformation profile
Application of response surface methodology to evaluate the effect of dry-spinning parameters on poly (ε-caprolactone) fiber properties
No full textPoly (ε-caprolactone) fibers were prepared by dry-spinning method. The effect of processing parameters on linear density, mechanical, and morphological properties of fibers was investigated using the response surface methodology (RSM). This method allowed evaluating a quantitative relationship between polymer concentrations, spinning speed, and draw ratio on the properties of the fibers. Polynomial regression model was fitted to the experimental data to generate predicted response. The results were subjected to analysis of variance to determine significant parameters. It was found that all three parameters had significant effect on linear density of fibers. Combined effect of concentration and spinning speed was observed in which the linear density of fiber was more sensitive to changes in the solution concentration at lower spinning speed. Polymer concentration had the largest influence on the mechanical properties of fibers. An average cross-sectional radius of fibers was affected by concentration and draw ratio in opposite manner. Among all three parameters, only polymer concentration had significant effect on circularity of fiber cross sections. By applying the RSM, it was possible to obtain a mathematical model that can be used to better define processing parameters to fabricate dry-spun PCL fiber in a more rational manner
Application of the dry-spinning method to produce poly(epsilon caprolactone) fibers containing bovine serum albumin laden gelatin nanoparticles
No full textWe designed and manufactured a polymeric system with combined hydrophilic–hydrophobic properties by loading gelatin
nanoparticles (GNPs) containing bovine serum albumin (BSA) into poly(e-caprolactone) (PCL) fibers. Our ultimate goal was to create a device capable of carrying and releasing protein drugs. Such a system could find several biomedical applications, such as those in controlled release systems, surgical sutures, and bioactive scaffolds for tissue engineering. A two-step desolvation method was used to produce GNPs, whereas PCL fibers were produced by a dry-spinning method. The morphological, mechanical, and thermal properties of the produced system were investigated, and the distribution of nanoparticles both inside and on the surface of the fibers was examined. The effect of the particles on the biodegradability of the fibers was also evaluated. In vitro preliminary tests were performed to study the release of
BSA from nanoparticle-laden fibers and to compare this with its release from free nanoparticles. Our results indicate that the distribution of particles inside the fibers was quite homogeneous and only a few of them were present on the surface. The presence of the particles in the fibers did not affect the thermal properties of the PCL polymer matrix, although it created voids that affected the degradation characteristics so the PCL fibers favored faster erosion compared to the plain fibers. Preliminary results indicate that the release from GNP-laden fibers occurred much more slowly compared to that in the free GNPs
Electrospun fibers of polyhydroxyalkanoate/bacterial cellulose blends and their role in nerve tissue engineering
Full text linkMultimaterial blends are crucial for developing scaffolds for tissue engineering. In this study, novel blend electrospun nanofibers are created by combining short-chain length polyhydroxyalkanoates (SCL-PHAs), medium-chain length polyhydroxyalkanoates (MCL-PHAs), and bacterial cellulose (BC) using the electrospinning technique. The resulting fibrous materials are characterized for their thermal properties, morphology, and cytocompatibility with NG108-15 neuronal cells. The fabricated blend nanofibers demonstrate good cytocompatibility, as indicated by trends in cell viability and neurite outgrowth in NG108-15 cells. Importantly, the inclusion of BC in the blend significantly improves the thermal stability of the polymer matrix, as confirmed by thermogravimetric analysis. This study introduces the concept of environmentally friendly and multifunctional materials, highlighting their potential for diverse applications in various scientific disciplines and industries, particularly in the field of nerve tissue engineering
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
- …
