1,720,959 research outputs found
Effectiveness of seismic retrofitting of a historical masonry structure: Kütahya Kurşunlu Mosque, Turkey
No full textInfluence of wall-to-floor connections and pounding on pre- and post-diction simulations of a masonry building aggregate tested on a shaking table
Get PDFThis paper presents numerical simulations within the frame of the project SERA-AIMS (Seismic Testing of Adjacent Interacting Masonry Structures). The study includes blind pre-diction and post-diction stages. The former was developed before performing the shaking table tests at the laboratory facilities of LNEC (Lisbon), while the latter was carried out once the test results were known. For both, three-dimensional finite element models were prepared following a macro-modelling approach. The structure consisted of a half-scaled masonry aggregate composed by two units with different floor levels. Material properties used for the pre-diction model were based on preliminary tests previously provided to the participants. The masonry constitutive model used for the pre-diction study reproduced classical stress-strain envelope, whereas a more refined model was adopted for the post-diction. After eigenvalue analysis, incremental nonlinear time history analysis was performed under a unique sequence based on the given load protocol to account for damage accumulation. In the post-diction, the numerical model was calibrated on the data recorded during the shaking table tests and nonlinear dynamic analysis repeated under the recorded accelerogram sequence. The interaction between the two units was simulated through interface elements. Moreover, the timber floors were accounted following different strategies: not modelling or considering nonlinear wall-to-floor connections. Advantages and disadvantages are then analysed, comparing the pre-diction and post-diction results with the experimental data. Numerical results differ from the experimental outcomes regarding displacements and interface pounding, although a clear improvement is visible in the post-diction model
Simulation of blind pre-diction and post-diction shaking table tests on a masonry building aggregate using a continuum modelling approach
Get PDFMasonry buildings of historical centres are usually organized within aggregates, whose structural performance against seismic actions is challenging to predict and constitutes still an open issue. The SERA-AIMS (Seismic Testing of Adjacent Interacting Masonry Structures) project was developed to provide additional experimental data by testing a half-scale, two-unit stone masonry aggregate subjected to two horizontal components of dynamic excitation. In this context, this paper investigates the reliability of the modelling approach and the assumptions adopted to generate a three-dimensional continuum finite element model. The work involves two stages, namely a blind pre-diction and a post-diction phase, and proposes a series of simulation analyses including a strategy to shorten the actual records and save computation costs. The study was performed to investigate the extent of uncertainty in modelling for such masonry aggregates in relation to the experimental outcomes. Pre-diction results were proven to be not accurate in terms of predicted displacements and damage patterns. The upgrades introduced for the post-diction analyses, including the calibration of the elastic modulus and the introduction of a non-linear interface between the two units, allowed to improve the outcomes, with reasonable results in terms of predicted base shear force, displacements along Y-direction and damage pattern for the non-linear stage. The overall approach showed to be appropriate for the structural analysis of existing masonry aggregates, but the accurate modelling of this type of structure remains challenging due to the high level of uncertainties
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Finite element modeling and operational modal analysis of a historical masonry mosque
Get PDFFinite Element Modeling (FEM) and Operational Modal Analysis (OMA) is herein presented for the historical masonry Kütahya Kurşunlu Mosque within the framework of its seismic performance assessment. The historical structure is located in Turkey which has a high-level seismic activity. A FEM strategy was adopted to construct a numerical model of the structure considering a simplified three-dimensional geometry and a macro-modeling approach for the masonry. A representative numerical model of the existing structure was calibrated and improved according to the OMA results obtained from ambient vibration measurements, performed in-situ. The ambient vibration measurements were operated by using two triaxial accelerometers, that one of the accelerometers was regulated as a reference station whereas the other accelerometer was relocated to seven different points on the top of the walls. Identification of the experimental modal parameters was achieved by performing two different signal processing methodologies, namely the Enhanced Frequency Domain Decomposition (EFDD) and the Stochastic Subspace Identification - Unweighted Principal Components (SSI-UPC). Results obtained from both methods were compared in terms of the Modal Assurance Criterion (MAC) which considers the mode shapes derived in a specific range of frequency. The SSI-UPC method was employed in achieving the experimental modal response of the structure and the results were compared with the eigenvalue analysis results of the preliminary numerical model. A calibration process was carried out in terms of minimizing the difference between the experimental and numerical modal response by a trial and error approach and an average error of 4.9% was calculated for the modal frequencies of the first four global modes of vibration
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
- …
