1,720,953 research outputs found
Dielectric behavior of syntactic foams at low temperatures and frequencies
No full textSyntactic foam is a lightweight composite consisting of hollow particles embedded in a polymer resin matrix. In this paper, results are presented of dielectric spectroscopy measurements on test specimens of syntactic foam with glass micro-spheres partially filled with SO2 . This type of syntactic foam is intended to be used as a high performance insulating material for lightweight high-voltage DC applications. The dielectric spectroscopy results showed an anomalous non-Debye behavior in a temperature range from roughly -140degC to +40degC. With increasing temperature the losses decrease at first, until they suddenly increase again at about +40degC. It has to be noted that the overall losses were quite high, compared to the base material. It appears that either the increased dc conductivity, the interfacial polarization at the interfaces between glass and epoxy, or both are the reason for these overall high losses. It is pointed out that the anomalous relaxation peak shifts to lower temperatures when the frequency is increased, contrary to normal behavior. In addition, a merge of two relaxation peaks is visible for higher frequencies at around 70degC, tentatively explained as being caused by the phase transition of SO2
Epoxy Based Nanodielectrics for High Voltage DC Applications: Synthesis, Dielectric Properties and Space Charge Dynamics
No full textMain goal of the research described in this PhD thesis was to determine the influences of filler size, material and distribution on the DC breakdown strength, permittivity and space charge behaviour of nanocomposites. This should lay the groundwork for tailored insulation materials for HVDC applications. Examples for this are medical and industrial X-ray imaging, radar and cable terminations. In the course of this project a manufacturing process was devised, which enabled the fabrication of epoxy based nanocomposites with a good dispersion of different types of nanoparticles. Models from literature, which explain the behaviour nanodielectrics exhibit, are discussed: electric double-layer model, intensity model, multi-core model and the interphase volume model. Based on these theories, a new model was devised for explaining the behaviour of epoxy based nanocomposites: the polymer chain alignment model. The underlying idea of this model is that the restructuring of the base polymer on the molecular scale, due to the presence of surface modified nanoparticles, plays a fundamental part in the properties of the bulk material. Each modified particle will act as centre for crosslinking of the polymer, leading to a rigid layer of polymer chains around each particle. These rigid layers have a much lower permittivity than both host and filler material, thus their presence can easily be identified by dielectric spectroscopy, since the relative permittivity of the bulk material decreases. In literature it is shown, that the strong bonding of particles and host material due to the surface modification gives rise to improved resistance to partial discharges and electrical treeing. More energy is needed to break these bonds than it would be the case in unmodified polymers. The particles themselves can also act as recombination centres for electrons and holes, which travel between or along polymer chains. This has an effect on the space charge dynamics. Agglomerations of nanoparticles can nullify these effects however: it is explained how agglomerations can act as charge traps, lead to field enhancements and cause interfacial polarization. Claims from theory are tested with three measurement methods: short term DC breakdown tests, dielectric spectroscopy and space charge measurement. It is shown that nanocomposites exhibit improved DC breakdown strength for very low fillgrades of 0.5 to 2 % by weight. Compared to the unmodified base material improvements of up to 80 % could be measured. Dielectric spectroscopy reveals that the relative permittivity in nanocomposites is lower than of the host and filler materials, with a minimum at a fillgrade of approximately 2 % by weight. For higher fillgrades the permittivity of the composite increases depending on the ratio between the permittivity values of filler and host material. Above 2 wt.% the permittivity of the filler material starts to overshadow the low permittivity of the rigid layers around the particles. Results from space charge measurement with the pulsed electro-acoustic method show that the quality of particle dispersion has an impact on the charge intake. Based on these measurements it is concluded that particle agglomerations act as charge traps, while the amount of charges in nanocomposites with good particle dispersion is lower than in the unmodified epoxy. This confirms that the particles indeed act as recombination centres, actively mitigating charge buildup inside the material. These results show why nanocomposites are very interesting for HVDC equipment. Space charges are a limiting factor for DC applications. Their reduction improves the reliability of the insulation system. The increased DC breakdown strength enables more compact high voltage equipment, respectively the utilization at higher field strengths. The work presented here is a stepping stone on the way to industrial applications of nanostructured insulation material and fundament for further investigations on topics like nanofluids.Electrical Sustainable EnergyElectrical Engineering, Mathematics and Computer Scienc
Going Beyond Counting First Authors in Author Co-citation Analysis
Get PDFThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Get PDF“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Get PDFWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Get PDFWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
- …
