1,720,960 research outputs found
Analyse du design et de la morphologie des stents pour la prévention des risques de migration et d'endofuite de type 1a : Une étude numérique pour l'anévrisme de l'aorte thoracique
No full textLe traitement endovasculaire des anévrismes de l’aorte (Endovascular Aneurysm Repair ou EVAR) est une chirurgie mini-invasive qui consiste à faire glisser une endoprothèse par voie fémorale jusqu’au niveau de l’anévrisme afin de re-canaliser le flux sanguin. Les principales complications qui peuvent survenir sont les phénomènes de migration et d’endofuites (écoulement persistant de sang dans le sac anévrismal) de type Ia. Ces phénomènes apparaissent lorsque l’étanchéité n’est plus assurée entre l’extrémité proximale de l’endoprothèse et le vaisseau sanguin. Dans ce travail, des simulations paramétrées de déploiement complet d’un système de pose de stent ont été développées en utilisant la Méthode des Éléments Finis (FEM) afin d’étudier la stabilité du contact lors du largage d’une endoprothèse en nitinol dans un Anévrisme de l’Aorte Thoracique (AAT) réaliste. Les facteurs suivants associés à ces complications ont été étudiés : (1) la longueur de la zone de fixation proximale (PASL), (2) la valeur de surdimensionnement ou « oversizing » du stent (O %), (3) la valeur du coefficient de frottement entre le stent et l’aorte (µ) et (4) l’angulation du collet proximal. L’influence de la présence de calcifications sur le comportement biomécanique de l’endoprothèse lors de son déploiement dans les zones de fixation a également été analysée. Les résultats des simulations ont montré qu’une PASL supérieure à 18 mm est un facteur décisif pour éviter la migration de l’endoprothèse pour une angulation du collet de l’anévrisme de 60° et dans des conditions de contact glissant (µ=0,05). L’augmentation de la valeur de l’oversizing de 10 % à 20 % améliore la résistance de la fixation de la prothèse. En revanche, un oversizing supérieur à 25 % pour une angulation du collet de 60° entraine des déformations excentriques ainsi que la ruine du stent. D’autre part, aucune migration n’a été observée dans un modèle d’aorte idéalisé où l’angulation du collet était de 0°, la PASL de 18 mm et le coefficient de frottement µ de 0,05. Afin d’améliorer le contact et de prévenir l’apparition de phénomènes de migration et d’endofuite de type Ia chez des patients présentant une aorte tortueuse et calcifiée avec un anévrisme fortement angulé, un nouveau design de stent a été proposé, basé sur les résultats des simulations numériques effectuées. La principale difficulté était de trouver un compromis entre flexibilité et raideur. Les résultats des simulations réalisées avec ce nouveau stent ont montré une amélioration de la stabilité de contact, ce qui a pour effet de limiter l’apparition des phénomènes de migration et donc de réduire les complications liées à la procédure endovasculaire.The main mechanical related problems of endovascular aneurysm repair are migration and endoleak type Ia. They occur when there is no effective seal between the proximal end of stent-graft and the vessel. In this work, we have developed parameterized-deployment simulations of a complete stenting system using finite element method (FEM) to investigate the contact stiffness of a nitinol stent in a realistic Thoracic Aortic Aneurysm (TAA). Therefore, the following factors associated with these complications have evaluated: (1) Proximal Attachment Site Length (PASL), (2) stent Oversizing value (O %), (3) different contact friction situations (stent/aorta) and (4) proximal neck angulation. The calcification impact on the biomechanical behaviour of the deployment at the attachment zone has also been investigated. The simulation results showed that PASL>18mm was a crucial factor to prevent migration at a neck angle of 60⁰and smoothest contact condition (μ=0.05). The increase in (O %) ranging from 10% to 20% improved the fixation strength; however, O % ≥ 25% at 60° caused eccentric deformation and stent collapse. No migration was reported in an idealized aorta model with a neck angle of 0⁰, PASL=18mm and μ=0.05. The numerical observations are used as a guide to optimize the stent design in such neck morphology to strengthen the contact and prevent migration or endoleak type Ia. The optimized stent results showed better contact stability to resist the migration. They also showed a good compromise of stent design requirements (flexibility and stiffness). Moreover, the new design can also prevent the risk of folding or collapse of stent struts by mitigating the energy of eccentric deformation caused by high angulation and oversizing
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
Author-wise bibliometric analysis based on entropy.
No full textAuthor-wise bibliometric analysis based on entropy.</p
Employing PLM in Learning Factories:A Project-Driven Architecture
Full text linkA factory environment called the CUBE, currently under development at the University of Twente, is an initiative that merges education, research, and simulated industrial facilities. It will consist of workshops, a learning factory, and a virtual reality lab fostering dynamic and collaborative learning environments alongside practical applications. In such an integrated environment, a comprehensive information provisioning is essential, with PLM functionality as the main focal point. To address the complex needs and innovative environments, a unified PLM solution is needed to seamlessly connect departments and stakeholders. This study primarily centers around the development of an ontology-based approach as the foundational framework for shaping the PLM architecture with the aim of capturing the interrelationships between all entities within the CUBE, thus creating a dynamic knowledge environment through a ‘master-apprentice’ approach This flexible architecture aims not only to optimize operations, but also to bridge educational platforms, facilitate interdisciplinary education, and enhance the overall learning experience.</p
- …
