1,720,958 research outputs found
Contribution of Shrinkage-Reducing Admixture and Lightweight Sand to Moist-Curing Requirement for Fiber-Reinforced Ultra-High-Performance Concrete
No full textThis study evaluates the potential to use shrinkage-reducing admixture (SRA) and pre-saturated lightweight sand (LWS) to shorten the external moist-curing requirement of ultra-high-performance concrete (UHPC), which is critical in some applications where continuous moist-curing is challenging. Key characteristics of UHPC prepared with and without SRA and LWS and under 3 days, 7 days, and continuous moist curing were investigated. Results indicate that the combined incorporation of 1% SRA and 17% LWS can shorten the required moist-curing duration because such a mixture under 3 days of moist curing exhibited low total shrinkage of 360 µε and compressive strength of 135 MPa (19,580 psi) at 56 days, and flexural strength of 18 MPa (2610 psi) at 28 days. This mixture subjected to 3 days of moist curing had a similar hydration degree and 25% lower capillary porosity in paste compared to the Reference UHPC prepared without any SRA and LWS and under continuous moist curing. The incorporation of 17% LWS promoted cement hydration and silica fume pozzolanic reaction to a degree similar to extending the moist-curing duration from 3 to 28 days and offsetting the impact of SRA on reducing cement hydration. The lower capillary porosity in the paste compensated for the porosity induced by porous LWS to secure an acceptable level of total porosity of UHPC
Going Beyond Counting First Authors in Author Co-citation Analysis
Full text linkThe present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation
counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings
are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that
only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into
account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed
Methodology To Design Eco-friendly Fiber-reinforced Concrete For 3D Printing
Full text linkGreater use of locally available supplementary cementitious materials (SCM) to reduce cement content and addition of fiber reinforcement can enhance the performance of 3D printing (3DP) technology in construction. In this study, three classes of eco-friendly 3D printable fiber-reinforced mixtures were targeted, namely ultra-high-performance concrete (UHPC), high-performance concrete (HPC), and conventional concrete (CC). A step-by-step methodology was proposed to maximize the substitution rate of cement with SCM and limestone filler and optimize fiber volume for the successful development of 3D printable fiber-reinforced materials. Binder combinations were initially investigated on the paste level to determine the packing density and robustness. Selected binder systems were narrowed down on the mortar level by evaluating the superplasticizer (SP) demand, plastic viscosity, forced bleeding, final setting time, and 3-day compressive strength. The 6-mm steel and 8-mm polyvinyl alcohol (PVA) fibers were incorporated for further evaluation of key properties of fiber-reinforced concrete. The printability of the fiber-reinforced mixtures was validated using an extrusion-based 3D printer. Developing such print materials with adequate strength and toughness can improve the cost-effectiveness of 3DP construction, and extend 3DP technology to remote areas
Enhanced shape stability of flowable mortar through CO2 injection for 3D concrete printing application
No full textThis study explores the direct injection of CO2 into the 3D printer head during the printing process, enabling real-time control of yield stress evolution in flowable mixtures. CO2 concentrations ranging from 0.5% to 1.4% by cement weight were tested by varying injection times. CO2 injection reduced slump flow of mortar from 250 to 100 mm, as reflected in the decreased width and increased height of printed layers. Mortar with 0.5% CO2 maintained flowability but experienced shape collapse during layer stacking, while higher CO2 concentrations led to nozzle blockages
Variations on the Author
Full text link“Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
Appropriate Similarity Measures for Author Cocitation Analysis
Full text linkWe provide a number of new insights into the methodological discussion about author cocitation analysis. We first argue that the use of the Pearson correlation for measuring the similarity between authors’ cocitation profiles is not very satisfactory. We then discuss what kind of similarity measures may be used as an alternative to the Pearson correlation. We consider three similarity measures in particular. One is the well-known cosine. The other two similarity measures have not been used before in the bibliometric literature. Finally, we show by means of an example that our findings have a high practical relevance.information science;Pearson correlation;cosine;similarity measure;author cocitation analysis
Dispelling the Myths Behind First-author Citation Counts
Full text linkWe conducted a full-scale evaluative citation analysis study of scholars in the XML research field to explore just how different from each other author rankings resulting from different citation counting methods actually are, and to demonstrate the capability of emerging data and tools on the Web in supporting more realistic citation counting methods. Our results contest some common arguments for the continued
use of first-author citation counts in the evaluation of scholars, such as high correlations between author rankings by first-author citation counts and other citation
counting methods, and high costs of using more realistic citation counting methods that are not well-supported by the ISI databases. It is argued that increasingly available digital full text research papers make it possible for citation analysis studies to go beyond what the ISI databases have directly supported and to employ more
sophisticated methods
koamabayili/VECTRON-author-checklist: VECTRON author checklist
No full textWe have done our best to complete the author checklist relating to the use of animals in the hut study. Note that the objective for the hut study was to evaluate the IRS treatment applications for residual efficacy against Anopheles mosquitoes, including the local An. coluzzii mosquito population. Cows were only used to attract mosquitoes into the huts and no tests were carried out directly on the cows. The author checklist is intended for use with studies where experiments are carried out on animals, which is why we have had such difficulty in completing this for the hut study, as many of the questions do not relate to how the cows were used
- …
