15,476,574 research outputs found

    Experimental Mapping and Benchmarking of Magnetic Field Codes on the LHD Ion Accelerator

    No full text
    The megavolt ITER injector concept advancement neutral injector test facility will be constituted by a RF-driven negative ion source and by an electrostatic Accelerator, designed to produce a negative Ion with a specific energy up to 1 MeV. The beam is then neutralized in order to obtain a focused 17 MW neutral beam. The magnetic configuration inside the accelerator is of crucial importance for the achievement of a good beam efficiency, with the early deflection of the co-extracted and stripped electrons, and also of the required beam optic quality, with the correction of undesired ion beamlet deflections. Several alternative magnetic design concepts have been considered, comparing in detail the magnetic and beam optics simulation results, evidencing the advantages and drawbacks of each solution both from the physics and engineering point of view. © 2012 American Institute of Physics

    A possible nature of breathing plasmas

    Get PDF
    A model for "breathing" plasmas observed in the large helical device [Y. Takeiri , Plasma Phys. Controlled Fusion 42, 147 (2000)] is proposed. It takes into account the synergism of radiation losses from both low-Z (carbon, oxygen) and high-Z (iron) impurities in the plasma power balance. (C) 2000 American Institute of Physics. [S1070- 664X(00)01411-7]

    Physics and engineering studies on the MITICA accelerator: comparison among possible design solutions

    No full text
    Consorzio RFX in Padova is currently using a comprehensive set of numerical and analytical codes, for the physics and engineering design of the SPIDER (Source for Production of Ion of Deuterium Extracted from RF plasma) and MITICA (Megavolt ITER Injector Concept Advancement) experiments, planned to be built at Consorzio RFX. This paper presents a set of studies on different possible geometries for the MITICA accelerator, with the objective to compare different design concepts and choose the most suitable one (or ones) to be further developed and possibly adopted in the experiment. Different design solutions have been discussed and compared, taking into account their advantages and drawbacks by both the physics and engineering points of view

    Prospect Toward Steady-State Helical Fusion Reactor Based on Progress of LHD Project Entering the Deuterium Experiment Phase

    Get PDF
    0000-0001-7569-6717Large Helical Device (LHD) is one of the world largest superconducting fusion experiment devices, having demonstrated its inherent advantage for steady-state operation since the start of experiments in 1998. LHD has also demonstrated reliable operation of the large-scale superconducting magnet system for almost two decades. Development of the challenging heating systems, such as negative-ion-based neutral beam injection (NBI), high-power and high-frequency electron cyclotron heating, and steady-state ion cyclotron heating, have led to wide-ranging physics and engineering achievements. LHD has progressed to the next stage, that is, the deuterium experiment starting in March 2017, which should further extend plasma parameters toward reactor-relevant regime. For establishing firm basis for designing steady-state helical fusion reactor, advanced physics research, such as on isotope effect, energetic particle confinement, and plasma-wall interaction, will be intensively performed in the deuterium experiments. In an engineering aspect, the upgrade of NBI system has been carried out in preparation to the deuterium experiment, and it should contribute to future NBI development for fusion reactors including ITER. For enhancement of the particle control, the closed divertor system has been installed with pumping capability. Diagnostics for neutron measurements are newly developed and installed for the deuterium experiment. Aligned with all the progress of LHD project in terms of engineering and physics aspects, the conceptual design activity of the LHD-type helical fusion reactor, FFHR-d1, has been programmatically conducted. In parallel to the design study, engineering research and development for the component development have been performed, including those based on employing challenging ideas such as high-temperature superconductor, liquid metal ergodic divertor, and molten-salt breeder blanket. The present status of LHD project entering the deuterium experiment phase is overviewed with putting emphasis on the engineering aspects, and then the engineering research and development activities toward steady-state helical fusion reactor are described.journal articl

    Sensitivity Analysis of the Off-Normal Conditions of the SPIDER Accelerator

    No full text
    In the context of the development of the 1 MV neutral beam injector for the ITER tokamak [1], the study on beam formation and acceleration has considerable importance. This effort includes the ion source and accelerator SPIDER (Source for Production of Ions of Deuterium Extracted from an Rf plasma) ion source, planned to be built in Padova, and designed to extract and accelerate a 355 A/m2 current of H- (or 285 A/m2 D-) up to 100 kV [2][3]. Exhaustive simulations were already carried out during the accelerator optimization leading to the present design [4]. However, as it is expected that the accelerator shall operate also in case of pre-programmed or undesired off-normal conditions, the investigation of a large set of off-normal scenarios is necessary. These analyses will also be useful for the evaluation of the real performances of the machine, and should help in interpreting experimental results, or in identifying dangerous operating conditions. The present contribution offers an overview of the results obtained during the investigation of these off-normal conditions, by means of different modeling tools and codes. The results, showed a good flexibility of the device in different operating conditions. Where the consequences of the abnormalities appeared to be problematic further analysis were addressed

    Modeling activities on the negative-ion-based Neutral Beam Injectors of the Large Helical Device

    No full text
    At the National Institute for Fusion Science (NIFS) large-scaled negative ion sources have been widely used for the Neutral Beam Injectors (NBIs) mounted on the Large Helical Device (LHD), which is the world-largest superconducting helical system. These injectors have achieved outstanding performances in terms of beam energy, negative-ion current and optics, and represent a reference for the development of heating and current drive NBIs for ITER. In the framework of the support activities for the ITER NBIs, the PRIMA test facility, which includes a RF-drive ion source with 100 keV accelerator (SPIDER) and a complete 1 MeV Neutral Beam system (MITICA) is under construction at Consorzio RFX in Padova. An experimental validation of the codes has been undertaken in order to prove the accuracy of the simulations and the soundness of the SPIDER and MITICA design. To this purpose, the whole set of codes have been applied to the LHD NBIs in a joint activity between Consorzio RFX and NIFS, with the goal of comparing and benchmarking the codes with the experimental data. A description of these modeling activities and a discussion of the main results obtained are reported in this pape

    Going Beyond Counting First Authors in Author Co-citation Analysis

    Get PDF
    The present study examines one of the fundamental aspects of author co-citation analysis (ACA) - the way co-citation counts are defined. Co-citation counting provides the data on which all subsequent statistical analyses and mappings are based, and we compare ACA results based on two different types of co-citation counting - the traditional type that only counts the first one among a cited work's authors on the one hand and a non-traditional type that takes into account the first 5 authors of a cited work on the other hand. Results indicate that the picture produced through this non-traditional author co-citation counting contains more coherent author groups and is therefore considerably clearer. However, this picture represents fewer specialties in the research field being studied than that produced through the traditional first-author co-citation counting when the same number of top-ranked authors is selected and analyzed. Reasons for these effects are discussed

    Men Rodríguez de Sanabria : (memorias del tiempo del rey don Pedro el Cruel) : novela histórica

    No full text
    Copia digital. Valladolid : Junta de Castilla y León. Consejería de Cultura y Turismo, 201

    Variations on the Author

    Get PDF
    “Variations on the Author” discusses two of Eduardo Coutinho’s recent films (Um Dia na Vida, from 2010, and Últimas Conversas, posthumously released in 2015) and their contribution to the general question of documentary authorship. The director’s filmography is characterized by a consistent yet self-effacing form of authorial self-inscription: Coutinho often features as an interviewer that rather than express opinions propels discourses; an interviewer that is good at listening. This mode of self-inscription characterizes him as an author who is not expressive but who is nonetheless markedly present on the screen. In Um Dia na Vida, however, Coutinho is completely absent form the image, while Últimas Conversas, on the contrary, includes a confessional prologue that moves the director from the margins to the center of his films. This article examines the ways in which these works stand out in the filmography of a director who offers new insights into the notion of cinematic authorship
    corecore