Archivio Aperto di Ateneo
Not a member yet
5899 research outputs found
Sort by
Stability and instability factors of multinational democracies : theoretical aspects and empirical evidence
There are several factors that produce stability of the multinational societies and many other that cause instability.
With this work the attempt is to examine the possibilities of successful accommodation and keep the unity and stability of the country. The main three aspects that the analysis includes are:
political autonomy and institutionalization of separate jurisdictions within which minorities (national groups) enjoy extensive devolved powers of self-government; power-sharing that includes representatives of minorities in the governing of the larger state;
principle of inclusiveness that allows all members of a self-governing groups to accede to the state-wide political process
Multinational federations with self-governing constituent units, usually combine mainly the above-mentioned three ingredients.
However, the constitutional arrangement, the electoral system, party system are strongly influenced by the presence of the national minorities or national groups. The main issue is to accommodate these groups and to give them the possibility of participation in a state decision-making process.
Several adjustments were made, but the empirical cases show how difficult is to find the suitable arrangement for multinational democracies. Consociational and federal arrangement were found to be most matching systems for deeply divided societies.
The theoretical part of the present work will be followed by the exam of two empirical cases, Belgium and Spain
La politica culturale del fascismo in Argentina (1923-1940)
Nel periodo tra le due guerre mondiali i governi delle principali potenze assunsero piena consapevolezza dei benefici che sarebbero potuti derivare da un intervento specifico nel settore della promozione culturale all’estero. Il ricorso a forme di propaganda, politica o diplomazia culturale interessò allora, con modalità differenti, tanto democrazie rappresentative quanto governi autoritari e regimi totalitari. In questo contesto assume particolare importanza l’esperienza del regime fascista e del suo tentativo di “parlare al mondo intero”. Prendendo le mosse dal pionieristico articolo di Emilio Gentile su “l’emigrazione italiana in Argentina nella politica di espansione del nazionalismo e del fascismo”, pubblicato in Italia nel 1986, la riflessione su questi temi ha conosciuto un apprezzabile sviluppo, soprattutto negli ultimi anni. La crescita di interesse per la questione è stata determinata soprattutto dall’esigenza di approfondire ulteriormente le conoscenze relative ai rapporti tra l’Italia e un paese che, tra gli anni Trenta dell’800 e la fine degli anni Cinquanta del ‘900, accolse sul proprio territorio milioni di italiani, che andarono a costituire il gruppo etnico più importante del paese, dopo quello di origine spagnola.
I diversi percorsi di ricerca su questi temi hanno portato a conclusioni non sempre convergenti, lasciando aperte una serie di problematiche su cui appare necessario continuare ad interrogarsi. E’ sembrata dunque utile un’indagine che, basandosi sull’esame di un insieme diversificato di fonti, che comprenda anche la parte ancora inedita della ricca documentazione custodita in fondi archivistici italiani e argentini, e materiale di altro tipo (stampa quotidiana, periodici, pubblicistica dell’epoca), avesse come obiettivo una ricostruzione dei principali aspetti della propaganda culturale realizzata a vari livelli dal fascismo italiano in Argentina. Attraverso l’utilizzo di queste fonti si è cercato quindi di mettere in evidenza gli aspetti ritenuti rilevanti, anche considerando questioni chiaramente connesse al tema oggetto di analisi, come ad esempio, le reazioni dei diversi settori della società argentina.
Ad una riflessione su alcuni temi e problemi collegati all’emergere, negli ultimi anni, di uno specifico campo di studi dedicato all’esame di aspetti non esclusivamente politico-diplomatici della proiezione esterna del fascismo, è dedicata la prima parte del lavoro. Successivamente sono state esaminate in dettaglio le origini e l’evoluzione della politica culturale italiana in Argentina. Nell’ultima parte del lavoro è stata proposta un’analisi della percezione che il fascismo ha avuto, principalmente attraverso gli organi del ministero della Cultura Popolare, dell’azione propagandistica delle altre potenze in Argentina, focalizzando l’attenzione sulla visione fascista della politica culturale statunitense nella Repubblica. Nel periodo tra le due guerre, e in particolare negli anni Trenta, lo scontro ideologico con le potenze democratiche trovò un terreno privilegiato nella Repubblica sudamericana, nella quale persisteva la difesa formale dei principi democratici, ma si andava rafforzando un movimento nazionalista particolarmente sensibile al messaggio fascista. Si inseriva in questo contesto l’intensificazione di un sentimento anti-statunitense che, all’apparenza, sembrava poter offrire ulteriori spazi di manovra all’azione propagandistica del regime fascista. Il conflitto tra le due visioni proposte dall’Italia e dagli Stati Uniti ha rappresentato effettivamente un elemento rilevante nelle dinamiche politiche argentine di quegli anni. Dal punto di vista assunto in questa ricerca, è apparso dunque importante chiedersi come il fascismo italiano abbia percepito e valutato il crescente impegno statunitense nel campo della propaganda culturale in Argentina, e pertanto questo specifico aspetto è stato oggetto di attenzione particolare nell’ultima sezione del lavoro
Analisi e sintesi di dispositivi di occultamento elettromagnetico basati sulla cancellazione dello scattering a microonde e frequenze ottiche
The PhD Thesis "Analysis and design of scattering cancellation based cloaking devices operating at microwave and optical frequencies" has been developed as a commented collection of the main research results that I achieved during my PhD. The Thesis is organized in four chapters, corresponding to as many research areas, all related to the macro-topic focused on the design and the applications of the metamaterials and metasurfaces at microwave, infrared and optical frequencies.
Chapter 1 is focused on the theoretical basis of the mantle cloaking at microwave frequencies. The main innovative results achieved in this context are: 1) the definition of a general procedure to design anisotropic mantle cloaks operating, at the same frequency, for both TM and TE incident polarizations. In particular, starting from the analytical model of metasurfaces available in the literature, I have first explored the potentials and limitations of the most common metasurface geometries for their application as mantle cloaks. Then, I have introduced new types of patterned surfaces aimed at improving their polarization response. It has been demonstrated that, only by using four metasurface topologies, it is possible to obtain all the required combinations of positive and negative reactance values in order to design effective mantle cloaks for planar, cylindrical and 3D objects; 2) The study of the interesting features of multilayered mantle cloaking devices, including, for instance, significant broadband and/or dual-band scattering reduction.
Chapter 2 focus on the application of the cloaking technologies both in the transmitting and the in receiving operation mode of antenna systems. My results in this field can be summarized as follows: 1) definition of new-conception optimized receiving sensors with the desired level of absorption efficiency, being able to minimize the electrical presence of a receiving antenna for a chosen level of overall absorption; 2) use of the mantle cloaking to overcome the blockage effect affecting the over-crowed communication platforms, both for passive obstacle (e.g., the support structure of the platforms) and among different antennas; 3) definition of a procedure to design new-conception linear antennas and arrays specifically designed to properly work in a frequencies range and to be electromagnetically invisible in another one. These radiative
systems provide a new degree of freedom in the design of modern communication platforms hosting an increasing number of radiators. In fact, the possibility to use invisible antenna systems that can be successfully placed in close proximity will allow to reduce both the space occupancy and the weight of the civil and military platforms as well as on of the satellite systems.
Chapter 3 dealt with the topic of optical cloaking. The following results has been obtained: 1) possible implementation of optical epsilon-near-zero (ENZ) metamaterials based on the employment of an array of core-shell nano-spheres embedded in a dielectric medium. The core of the nano-spheres and the host medium are both made of silica whereas the shell is formed by a plasmonic material (i.e., silver). Using classical homogenization formulas, I show that it is possible to design the array in such a way to exhibit near-zero values of the effective real permittivity with relatively low-losses in the upper part of the optical spectrum; 2) investigation of the application of the mantle cloaking technique to near-infrared and visible frequencies, using thin covers consisting of 2D arrays of plasmonic non-spherical nanoparticles. Here, I focused in more detail in the plasmonic nanoparticles modeling and I generalized the literature results to demonstrate that the nanoparticles arrays can be characterized by a suitable average surface reactance. Then, I show that the use of two-dimensional model is more appropriate than the one based on the effective permittivity. This analysis has allowed to extend the metasurfaces-based cloaking up to optical frequencies and to engineer the shape of the plasmonic nanoparticles in order to dramatically improve the performance of the optical cloaking devices previously proposed.
Finally, Chapter 4 collects my results in other research fields: 1) investigation of the use of non-Foster active circuits to increase the operation bandwidth of a split-ring resonator (SRR) for possible application in metamaterial-inspired components, In particular, I propose a possible realistic implementation of the active load, based on the employment of commercially available circuit elements. The obtained results (seven times improvement of the impedance bandwidth of the SRR-based monopole antenna) prove that non-Foster active loads can be successfully used to overcome the inherent narrow-band operation of SRR-based passive metamaterials and metamaterial-inspired components.; 2) definition of a simple and low-cost technique for realizing resistive 3 sheets. This approach, requiring only easy-to-find and inexpensive materials, consists in the deposition of graphite powder on ultrathin plastic sheet substrates. I show that, by controlling the deposition time and the mass of the deposited powder, it is possible to realize resistive sheets exhibiting a desired surface resistance in a wide range of values.
All Chapters are preceded by a short introduction describing my publications related to that specific topic and summarizing the content of the various Section. In each Section, I have reported the state-of-the-art about the topic and my main findings, that are supported by a combination of theoretical, numerical, and, where available, experimental results
Web based face recognition for visual internet of things
Penelope non e certa dell’identita dello sconosciuto, lo osserva, a volte le sembra di riconoscerlo, a volte e tratta in inganno dall’aspetto trasandato dello straniero i cui tratti sembrano lontani dall’Ulisse partito da Itaca venti anni prima. La difficolta di Penelope e la medesima che tutti hanno quotidianamente nella relazione con gli altri.
Quando le persone si incontrano l’attivita principale che il cervello umano svolge e quella di associare il volto ad una identita nota. Questo esercizio, normalmente semplice, puo risultare molto complesso nel momento in cui i tratti somatici non sono nitidi all’occhio umano, quando il processo di associazione del volto e ostacolato da difficolta di memoria oppure quando il cervello e ingannato da similarita tra lineamenti di soggetti diversi. Questa funzione, comune per gli uomini, e molto complessa per i sistemi automatici. Negli ultimi 40 anni sono stati effettuati numerosi studi e sviluppati diversi algoritmi per il riconoscimento dei volti ma l’efficienza dell’uomo nell’associare un volto ad una identita nella varieta delle situazioni della vita quotidiana e ancora lontana. Gli studi sono stati orientati sia a sviluppare tecniche per il riconoscimento automatico di elementi biometrici come l’ovale del viso, la bocca o gli occhi sia per l’associazione di immagini di persone con identita note. Mentre le tecniche per il riconoscimento automatico di elementi biometrici ha avuto un buon successo, come dimostra la diffusa applicazione nei prodotti di consumo come le fotocamere, le soluzioni per l’associazione delle identita sono efficaci solo in condizioni nelle quali il processo di acquisizione delle immagini e ben controllato. Attualmente lo studio degli algoritmi per il riconoscimento automatico dei volti e di interesse per lo sviluppo di strumenti software in grado di modificare i processi di produzione multimediali che sono fondamentalmente basati sulla capacita di un operatore umano di interpretare una sequenza di immagini. L’applicazione di strumenti automatici per il riconoscimento di volti nelle sequenze multimediali e una modalita operativa che non e ancora completamente consolidata e che non ha trovato applicazione nell’industria settoriale nella quale tuttora si utilizza la capacita umana come strumento di decisione. Il principale lavoro svolto nel corso del triennio dottorale, il cui percorso e illustrato in questa tesi, è stato quello di studiare un sistema di riconoscimento automatico di volti che consenta l’identificazione di un individuo e la relativa annotazione del contenuto multimediale utilizzando il Web come archivio di immagini. Nell’ambito di questo lavoro di ricerca il Web e stato utilizzato per la realizzazione di un nuovo database di immagini per apprendimento (gallery) dei classificatori con l’obiettivo di proporre elementi innovativi per l’Internet of Things (IoT), nella sua evoluzione identificata come “Visual Internet of Things” (VIoT).
Il primo capitolo illustra lo stato dell’arte delle tecnologie per la rilevazione e il riconoscimento delle identita dei volti presenti nelle immagini partendo dall’analisi della letteratura scientifica piu recente, presentando i maggiori archivi di immagini disponibili per la ricerca scientifica ed infine introducendo il concetto di Visual Internet of Things.
Il secondo capitolo descrive gli elementi fondamentali dei processi di riconoscimento facendo riferimento alle tecnologie di pattern recognition che sono alla base degli algoritmi finalizzati al riconoscimento dei volti. Vengono presentati i principali algoritmi sviluppati finora e i principali approcci adottati. Il terzo capitolo descrive il lavoro di preparazione effettuato sulle sequenze video, i principali problemi affrontati nell’estrazione dei quadri rilevanti ai fini dell’identificazione dei soggetti e i principali risultati ottenuti. Tutte le sequenze video sono state acquisite mediante sistemi di registrazione commerciali da trasmissioni TV e successivamente sono state elaborate al fine di poter ottenere delle sequenze di quadri alle quali applicare algoritmi per la rilevazione dei volti. Si è proceduto ad effettuare registrazioni sia da trasmissioni in HD a 1920x1080i che in SD a 720x576i per poter effettuare a una serie di confronti prestazionali. Il quarto capitolo descrive le varie fasi seguite nel processo di riconoscimento partendo dalle prime prove effettuate con un insieme ridotto di volti fino alla descrizione di prove effettuate con piu algoritmi su un campione esteso di quadri sia in HD che in SD. Nel capitolo e descritto anche il processo seguito per la realizzazione dell’archivio di immagini campione scaricate dal Web. Vengono presentati I principali risultati ottenuti pubblicati in occasione di alcune conferenze scientifiche. Nel quinto capitolo, dedicato alle conclusioni, viene presentata una sintesi dei principali risultati, sono messi in luce i maggiori problemi per lo sviluppo di tali soluzioni tecnologiche e sono indicati alcuni temi di approfondimento. Infine viene presentata una breve panoramica sui servizi di prossima generazione in corso di sviluppo e di applicazione da parte di alcune aziende.Penelope is not confident of her feeling about the identity of the unknown, she observes him, sometimes she seems recognizing him, sometimes she is misled by the scruffy-looking foreign aspect whose features seem far from the Ulysses who departed from Ithaca twenty years before. The difficulty of Penelope is the same in that all have a daily relationship with others.
When people meet, the main activity that the human brain performs is to associate the face to a known identity. This exercise, usually simple, can be very complicated when the facial features are not clear to the human eye, when the process of association of the face is hampered by poor memory or when the brain is fooled by the similarity between features of different subjects.
This feature, common to humans, is very difficult for automatic systems. In the last 40 years there have been numerous studies and developed several algorithms for face recognition but the efficiency of men to associate a face to an identity in the variety of situations in everyday life is still far away. The studies were directed both to develop techniques for automatic recognition of biometrics as the oval of the face, mouth or eyes and to associate an image of a person with a known identity. While the techniques for automatic recognition of biometrics has been quite successful, as evidenced by the widespread application in consumer products such as cameras, solutions for the association of identity are effective only in conditions in which the process of image acquisition is well controlled. Currently, the study of the algorithms for the automatic recognition of faces is of interest for security applications or for the development of software tools able to modify the multimedia production processes that are fundamentally based on the capability of a human operator to understand a sequence of images. The application of automated tools for the recognition of faces in multimedia sequences is an operative mode that is not yet fully established and that has not been applied in the industry sector in which still is in use the human capability as decision tool.
The main work carried out during the three-year doctoral, whose path is shown in this thesis, was to study a system of automatic recognition of faces enabling the identification of an individual and the pertaining annotation of multimedia content using the Web as image database. In the context of this research work, the Web was used for the creation of a new database of images for the learning procedures (gallery) of the classifiers with the aim to propose innovative elements for the Internet of Things (IoT), in its evolution identified as "Visual Internet of Things" (VIoT). Chapter one describes the state of the art for the detection and recognition technologies of the identity of faces in images. It begins with an analysis of the most recent scientific literature, presenting the main archives of images available for scientific research and finally introducing the concept of VIoT. The second chapter describes the basic elements of the recognition process by referring to the pattern recognition technologies that are the basis of algorithms aimed at identification of objects and subsequently the faces. We present the main algorithms developed and the applied approaches. The third chapter describes the preparation work carried out on video sequences, the main problems faced in extracting the relevant frameworks for identifying the parties and the main results obtained.
All video sequences have been acquired through standard registration systems from commercial TV broadcasts and subsequently have been elaborated in order to obtain sequences of pictures on which apply algorithms for the detection and identification of faces. We proceeded to record contents both from HD broadcasts at 1920x1080i and from SD at 720x576i in order to carry out a set of comparisons of performance.
The fourth chapter describes the various steps followed in the recognition process starting from the first tests carried out with a reduced set of faces to the description of the tests carried out with more algorithms on a larger sample of pictures in both HD and SD. The chapter also describes the process followed for the creation of the archive of sample images downloaded from the Web. We present the main results published in some scientific conferences. The fifth chapter, dedicated to conclusions, contains a summary of the main results and includes a review of the major issues for the development of such technological solutions proposing some topics for dditional studies. Finally there is a short overview of the next-generation services in progress of development and implementation by some companies