Fibusi (Jurnal Online Fisika)
Not a member yet
33 research outputs found
Sort by
Liputan Awan Total di Kawasan Sekitar Khatulistiwa Selama Fase Aktif dan Tenang Matahari Siklus 21 & 22 dan Korelasinya dengan Intensitas Sinar Kosmik
Telah dilakukan analisis korelasi antara liputan awan total di kawasan sekitar khatulistiwa (100 LU – 120 LS dan 900 BT – 1420 BT) dan intensitas sinar kosmik memanfaatkan data liputan awan total yang diperoleh dari Badan Meteorologi Klimatologi dan Geofisika (BMKG) serta data sinar kosmik bulanan dari stasiun Huancayo, Peru. Pengolahan data dilakukan dengan membagi lintang geografis yang dicakup ke dalam grid dengan interval dua derajat. Untuk memperoleh nilai koefisien korelasi terbaik telah dilakukan teknik pergeseran waktu kejadian liputan awan total terhadap sinar kosmik dalam rentang 2 – 7 bulan dan hanya meninjau puncak fase aktif dan tenang Matahari yang bersesuaian dengan siklus Matahari ke-21 dan 22. Melalui teknik di atas dapat diperoleh nilai koefisien korelasi dalam kisaran 0,04 – 0,63 (tidak ada korelasi hingga korelasi dalam tingkat sedang). Studi yang dilakukan ini hanya memperhitungkan kontribusi sinar kosmik tanpa menyertakan faktor letak geografis wilayah yang ditinjau, apakah kawasan benua ataukah maritim.Kata kunci: Aktivitas Matahari, Liputan Awan Total, Sinar Kosmik. Total Cloud Coverage on Equator Region in Solar Active and Quiet Phase of 21st & 22nd Cycle and Its Correlation with Cosmic Ray IntensityWe have analyzed the correlation between total cloud cover in the area around equator (100 N – 120 S and 900 E – 1420 E) with the intensity of cosmic rays by using data obtained from Indonesian Meteorological, Climatological and Geophysical Agency (BMKG) as well as monthly cosmic ray data from Huancayo station in Peru. Data processing has been done by dividing the covered geographical latitude into grids of two degrees intervals. To obtain the best value of the correlation coefficient we have employed time shift technique on the incident of total cloud cover to cosmic rays in the range of 2 – 7 months and only consider peak of active and quite phase of the Sun during 21th and 22nd solar cycle. By using this technique we can obtain correlation coefficient in the range of 0.04 to 0.63 (no correlation to moderate correlation). In the study we have conducted, we only take into account the contribution of cosmic ray without including geographic location factors such as, whether the region being investigated is at continental or maritime region.Keywords: Solar Activity, Total Cloud Coverage, Cosmic Ra
Pengaruh Suhu Annealing Lapisan Aktif Polimer P3HT:PCBM Terhadap Unjuk Kerja Sel Surya Polimer Yang Ditumbuhkan Di Atas Substrat Gelas
Pada penelitian ini telah dilakukan pendekatan untuk meningkatkan unjuk kerja sel surya polimer P3HT:PCBM dengan melakukan kontrol terhadap morfologi melalui annealing lapisan aktif. Proses annealing terhadap lapisan aktif sebagai kontrol morfologi diduga mempengaruhi unjuk kerja sel surya polimer karena akan memperbaiki homogenitas dari lapisan aktif polimer. Sel surya dibuat dengan menggunakan bahan polimer sebagai lapisan aktif semikonduktor organik. Polimer yang digunakan adalah poly(3-heksiltiofen) atau P3HT yang berfungsi sebagai donor elektron, dan [6,6]-fenil C61 asam butirat metil ester atau PCBM sebagai akseptor elektron. Kedua material dibuat dalam struktur bulk-heterojunction film tipis menggunakan teknik spin coating. Dalam penelitian ini, annealing telah dilakukan dengan variasi suhu 120 °C dan 150 °C. Hasil SEM menunjukan bahwa kenaikan suhu annealing mempengaruhi struktur morfologi sampel dimana permukaan lapisan aktif menjadi lebih halus dan homogen. Disamping itu transmitansi minimum kedua sampel terjadi pada rentang panjang gelombang 450-700 nm , dimana sampel 150 °C memiliki transmitansi yang lebih rendah dibandingkan sampel 120 °C. Sebagai hasil karakterisasi listrik, diperoleh nilai parameter untuk sampel 120 °C dan 150 °C dimana daya maksimum, fill faktor, dan efisiensi, masing-masing adalah, 8,66 x 10-5 W dan 9,39 x 10-5 W, 0,301 dan 0,342, dan 0,028 % dan 0,003 %.Kata kunci: Sel surya polimer, lapisan aktif, P3HT:PCBM, annealing, bulk-heterojunction. The Influence of Annealing Temperature of The Polymer Active Layer P3HT:PCBM to The Performance of Polymer Solar Cells on Glass SubstratesIn this work, the approach has been taken to improve the performance of polymer solar cells based on P3HT:PCBM with controlling the morphology through annealing. Annealing proccess as the control of the morphology is thought to affect the performance of polymer solar cells because it will improve the homogenity of the active layer of polymer. Solar cell is made using the polymer materials as the active layer of organic semiconductor. The polymer that it used is a poly(3-hexylthiophene) or P3HT which serves as an electron donor, and [6,6]-phenyl-c61-butyric acid methyl ester or PCBM as an electron acceptor. Both materials are made in bulk heterojunction structure of thin film technology using spin coating techique. In this work, annealing of active layer has been done with variation temperatures 120 °C and 150 °C. SEM results showed that the increase of annealing temperature affects the morphology surface structure of the sample whre the active layer becomes more smooth and homogeneous. Despitefully, the minimum transmittance of both samples occur over a range of wavelengths 450-700 nm, where the sample 150 °C has a lower transmitance than the sample120 °C. As a result of electric characterization, it is gotten the parameter values obtained for the sample 120 °C and 150 °C, and where the maximum power, fill factor, and efficiency, each of them are 8,66 x 10-5 W and 9,39 x 10-5 W, 0,301and 0,342, and 0,028 % and 0,003 %.Keywords: Polymer Solar Cells, An active layer, P3HT:PCBM, annealing, bulk-heterojunction
Penerapan Metode Polarisasi Sinyal ULF dalam Pemisahan Pengaruh Aktivitas Matahari dari Anomali Geomagnet Terkait Gempa Bumi
Telah dilakukan penerapan metode polarisasi sinyal ULF terhadap anomali geomagnet terkait gempa Bumi dari pengaruh eksternal seperti aktivitas Matahari berdasarkan data dari Stasiun Kototabang, Sumatera Barat. Berdasarkan dua kejadian gempa yang terjadi pada 6 Maret dan 7 April 2012 sebagai studi kasus, diperoleh bahwa dengan metode polarisasi sinyal ULF ini untuk kejadian gempa pertama, amplitudo anomali terbesar dari ketiga rentang periode pemfilteran yang digunakan dalam penelitian ini, terjadi pada 21 hari sebelum kejadian. Untuk kejadian gempa ke dua, anomali tersebut terjadi 17 hari sebelum kejadian gempa. Dengan metode ini diharapkan dapat diidentifikasi prekursor untuk gempa-gempa besar secara visual sehingga dapat digunakan sebagai informasi tambahan guna keperluan prediksi dan mitigasi bencana gempa Bumi.Kata kunci: Anomali Geomagnet, Gelombang ULF, Gempa Bumi. Application of ULF Signal Polarization Method in Solar Activity Influence Separation from Geomagnet Anomaly Related to EarthquakeWe have applied ULF signal polarization method to separate geomagnetic anomalies related to earthquakes from external influences such as solar activity, based on data from Kototabang Station, West Sumatera. Based on the two earthquakes that occurred on March 6 and April 7 2012 as a case study, we have found that the largest amplitude anomaly of the three period spans filtering used in this study, occurred 21 days prior to the event. For the second earthquake, the anomaly occurred 17 days before the earthquake. By using this method we can identify precursors to large earthquakes visually for prediction and mitigation purposes of earthquakes disaster.Keywords: Geomagnet Anomaly, ULF Wave, Earthquak