Hochschule Bonn-Rhein-Sieg
Publikationsserver der Hochschule Bonn-Rhein-Sieg - pub H-BRSNot a member yet
7939 research outputs found
Sort by
Medizinisches Personal sensibilisieren: Bewusstsein für Gefährdungen der Patientenversorgung aus dem Cyberraum schaffen – Teil 1
No full text
Nachhaltigkeitsaudits als innovative Lernarrangements für BBNE
No full textDer vorliegende Beitrag setzt sich mit der Bedeutung von Lernorten der beruflichen Bildung im Zuge einer BBNE sowie der diesbezüglichen Kompetenzentwicklung auseinander. Dabei wird entlang des BIBB-Modellversuchs „NAUZUBI“ ein möglicher Ansatz skizziert, der darauf ausgerichtet ist, eine integrative Kompetenzentwicklung in Nachhaltigkeitsthemen zu ermöglichen. Ausgangspunkt sind dabei betriebliche Nachhaltigkeitsaudits, die im vorliegenden Ansatz als kontextualisierte Zugänge für berufliche Lernanlässe dienten. Diese wurden in aufeinander abgestimmten Schritten im betrieblichen und schulischen Lernen reflektiert. Im Beitrag werden das Grundkonzept sowie die entsprechenden Umsetzungserfahrungen beschrieben. Es werden ferner Herausforderungen und Potenziale für das betriebliche, berufsschulische und das lernortkooperative Lernen und damit die integrative Kompetenzentwicklung dargestellt.This article deals with the importance of learning venues in vocational education and training in the course of BBNE and the related competence development. A possible approach is outlined along the lines of the BIBB pilot project "NAUZUBI", designed to enable integrative competence development in sustainability topics. The starting point for this is in-company sustainability audits, used in the present approach as contextualized access points for vocational learning occasions. These were refected in further steps in company and school learning. The article describes the fundamental concept as well as the corresponding experiences of implementation. Integrative competence development is portrayed by demonstrating further challenges and potentials for workplaces, vocational school learning and cooperative learning in the context of learning venues
Schwindungssimulation blasgeformter Bauteile unter Verwendung viskoelastischer Materialmodelle
No full textThe utilization of simulation procedures is gaining increasing attention in the product development of extrusion blow molded parts. However, some simulation steps, like the simulation of shrinkage and warpage, are still associated with uncertainties. The reason for this is on the one hand a lack of standardized interfaces for the transfer of simulation data between different simulation tools, and on the other hand the complex time-, temperature- and process-dependent material behavior of the used semi crystalline polymers. Using a new vendor neutral interface standard for the data transfer, the shrinkage analysis of a simple blow molded part is investigated and compared to experimental data. A linear viscoelastic material model in combination with an orthotropic process- and temperature-dependent thermal expansion coefficient is used for the shrinkage prediction. A good agreement is observed. Finally, critical parameters in the simulation models that strongly influence the shrinkage analysis are identified by a sensitivity study.Der Einsatz von Simulationsverfahren gewinnt in der Produktentwicklung extrusionsblasgeformter Kunststoffhohlkörper zunehmend an Bedeutung. Einige Simulationsschritte, wie z.B. die Simulation von Schwindung und Verzug, sind jedoch noch mit Unsicherheiten verbunden. Grund dafür ist zum einen das Fehlen standardisierter Schnittstellen für den Transfer von Simulationsdaten zwischen verschiedenen Softwaretools und zum anderen das komplexe zeit-, temperatur- und prozessabhängige Materialverhalten der verwendeten teilkristallinen Polymere. Unter Anwendung eines neuen Schnittstellenstandards für den Datentransfer wird die Schwindungsanalyse eines einfachen blasgeformten Bauteils untersucht und mit experimentellen Daten verglichen. Für die Schwindungssimulation wird ein linear viskoelastisches Materialmodell in Kombination mit einem orthotropen prozess- und temperaturabhängigen thermischen Ausdehnungskoeffizienten verwendet. Der Vergleich mit experimentellen Messdaten zeigt eine gute Übereinstimmung. Abschließend erfolgt eine Sensitivitätsstudie zur Identifikation der maßgeblichen Einflussgrößen auf die Schwindungssimulation
Climatic response of thermally coupled solar water splitting in Antarctica
No full textHydrogen is a versatile energy carrier. When produced with renewable energy by water splitting, it is a carbon neutral alternative to fossil fuels. The industrialization process of this technology is currently dominated by electrolyzers powered by solar or wind energy. For small scale applications, however, more integrated device designs for water splitting using solar energy might optimize hydrogen production due to lower balance of system costs and a smarter thermal management. Such devices offer the opportunity to thermally couple the solar cell and the electrochemical compartment. In this way, heat losses in the absorber can be turned into an efficiency boost for the device via simultaneously enhancing the catalytic performance of the water splitting reactions, cooling the absorber, and decreasing the ohmic losses.[1,2] However,integrated devices (sometimes also referred to as “artificial leaves”), currently suffer from a lower technology readiness level (TRL) than the completely decoupled approach
Self-supervised Learning for Sonar Image Classification
No full textSelf-supervised learning has proved to be a powerful approach to learn image representations without the need of large labeled datasets. For underwater robotics, it is of great interest to design computer vision algorithms to improve perception capabilities such as sonar image classification. Due to the confidential nature of sonar imaging and the difficulty to interpret sonar images, it is challenging to create public large labeled sonar datasets to train supervised learning algorithms. In this work, we investigate the potential of three self-supervised learning methods (RotNet, Denoising Autoencoders, and Jigsaw) to learn high-quality sonar image representation without the need of human labels. We present pre-training and transfer learning results on real-life sonar image datasets. Our results indicate that self-supervised pre-training yields classification performance comparable to supervised pre-training in a few-shot transfer learning setup across all three methods. Code and self-supervised pre-trained models are be available at https://github.com/agrija9/ssl-sonar-image
The annual-hydrogen-yield-climatic-response ratio: evaluating the real-life performance of integrated solar water splitting devices
No full textIntegrated solar water splitting devices that produce hydrogen without the use of power inverters operate outdoors and are hence exposed to varying weather conditions. As a result, they might sometimes work at non-optimal operation points below or above the maximum power point of the photovoltaic component, which would directly translate into efficiency losses. Up until now, however, no common parameter describing and quantifying this and other real-life operating related losses (e.g. spectral mismatch) exists in the community. Therefore, the annual-hydrogen-yield-climatic-response (AHYCR) ratio is introduced as a figure of merit to evaluate the outdoor performance of integrated solar water splitting devices. This value is defined as the ratio between the real annual hydrogen yield and the theoretical yield assuming the solar-to-hydrogen device efficiency at standard conditions. This parameter is derived for an exemplary system based on state-of-the-art AlGaAs//Si dual-junction solar cells and an anion exchange membrane electrolyzer using hourly resolved climate data from a location in southern California and from reanalysis data of Antarctica. This work will help to evaluate, compare and optimize the climatic response of solar water splitting devices in different climate zones
Process-Induced Morphology of Poly(Butylene Adipate Terephthalate)/Poly(Lactic Acid) Blown Extrusion Films Modified with Chain-Extending Cross-Linkers
No full textProcess-induced changes in the morphology of biodegradable polybutylene adipate terephthalate (PBAT) and polylactic acid (PLA) blends modified with various multifunctional chainextending cross-linkers (CECLs) are presented. The morphology of unmodified and modified films produced with blown film extrusion is examined in an extrusion direction (ED) and a transverse direction (TD). While FTIR analysis showed only small peak shifts indicating that the CECLs modify the molecular weight of the PBAT/PLA blend, SEM investigations of the fracture surfaces of blown extrusion films revealed their significant effect on the morphology formed during the processing. Due to the combined shear and elongation deformation during blown film extrusion, rather spherical PLA islands were partly transformed into long fibrils, which tended to decay to chains of elliptical islands if cooled slowly. The CECL introduction into the blend changed the thickness of the PLA fibrils, modified the interface adhesion, and altered the deformation behavior of the PBAT matrix from brittle to ductile. The results proved that CECLs react selectively with PBAT, PLA, and their interface. Furthermore, the reactions of CECLs with PBAT/PLA induced by the processing depended on the deformation directions (ED and TD), thus resulting in further non-uniformities of blown extrusion films
Technostress, Persönlichkeit und die Folgen von Technostress: Ein systematisches Literaturreview zur empirischen Forschungslage
Get PDFDie Digitalisierung und der Einsatz von Informations- und Kommunikationstechnologien (ICT) hat im Arbeits- und Privatleben neben einer höheren Produktivität auch zu neuen Formen von psychischem Stress geführt. Das Stresserleben, das mit dem Einsatz von ICT verbunden ist, wird in der Literatur auch als Technostress bezeichnet. Die Forschung zu diesem Thema zeigt, dass die Entstehung von Technostress von individuellen Faktoren abhängt. Die Persönlichkeit von ICT-Anwenderinnen und Anwendern bestimmt nicht nur das Auftreten von Technostress, sondern hat auch Einfluss auf dessen gesundheitliche und leistungsbezogene Folgen. In diesem Literaturreview wird der Forschungsstand zu der Rolle von Persönlichkeitsunterschieden bei der Entstehung von Technostress und dessen Folgen systematisch zusammengefasst. Die Auswertung der relevanten Forschungsartikel erfolgt hinsichtlich verwendeter Variablen, Stichproben und Studiendesigns, statistischer Methoden, Theorien und Frameworks. Abschließend werden der aktuelle Forschungsstand eingeordnet und Forschungslücken aufgezeigt