Offenburg University of Applied Sciences
Hochschulschriftenserver der Hochschule OffenburgNot a member yet
6641 research outputs found
Sort by
Procédé et système d'extraction de métal et d'oxygène à partir d'oxydes métalliques en poudre
No full textA method for extracting metal and oxygen from powdered metal oxides in electrolytic cell is proposed, the electrolytic cell comprising a container, a cathode, an anode and an oxygen-ion-conducting membrane, the method comprising providing a solid oxygen ion conducting electrolyte powder into a container, providing a feedstock comprising at least one metal oxide in powdered form into the container, applying an electric potential across the cathode and the anode, the cathode being in communication with the electrolyte powder and the anode being in communication with the membrane in communication with the electrolyte powder, such that at least one respective metallic species of the at least one metal oxide is reduced at the cathode and oxygen is oxidized at the anode to form molecular oxygen, wherein the potential across the cathode and the anode is greater than the dissociation potential of the at least one metal oxide and less than the dissociation potential of the solid electrolyte powder and the membrane
Trust Management System for Hybrid Industrial Blockchains
No full textAs industrial networks continue to expand and connect more devices and users, they face growing security challenges such as unauthorized access and data breaches. This paper delves into the crucial role of security and trust in industrial networks and how trust management systems (TMS) can mitigate malicious access to these networks.The TMS presented in this paper leverages distributed ledger technology (blockchain) to evaluate the trustworthiness of blockchain nodes, including devices and users, and make access decisions accordingly. While this approach is applicable to blockchain, it can also be extended to other areas. This approach can help prevent malicious actors from penetrating industrial networks and causing harm. The paper also presents the results of a simulation to demonstrate the behavior of the TMS and provide insights into its effectiveness
Blockchain interoperability: the state of heterogenous blockchain-to-blockchain communication
Get PDFBlockchain technology has been increasingly adopted over the past few years since the introduction of Bitcoin, with several blockchain architectures and solutions being proposed. Most proposed solutions have been developed in isolation, without a standard protocol or cryptographic structure to work with. This has led to the problem of interoperability, where solutions running on different blockchain platforms are unable to communicate, limiting the scope of use. With blockchains being adopted in a variety of fields such as the Internet of Things, it is expected that the problem of interoperability if not addressed quickly, will stifle technology advancement. This paper presents the current state of interoperability solutions proposed for heterogenous blockchain systems. A look is taken at interoperability solutions, not only for cryptocurrencies, but also for general data-based use cases. Current open issues in heterogenous blockchain interoperability are presented. Additionally, some possible research directions are presented to enhance and to extend the existing blockchain interoperability solutions. It was discovered that though there are a number of proposed solutions in literature, few have seen real-world implementation. The lack of blockchain-specific standards has slowed the progress of interoperability. It was also realized that most of the proposed solutions are developed targeting cryptocurrency-based applications
Transferal Skills in Applied Artificial Intelligence – The Case of Financial Sector
No full textArtificial Intelligence (AI) can potentially transform many aspects of modern society in various ways, including automation of tasks, personalization of products and services, diagnosis of diseases and their treatment, transportation, safety, and security in public spaces, etc. Recently, AI technology has been transforming the financial industry, offering new ways to analyse data and automate processes, reduce costs, increase efficiency, and provide more personalized services to customers. However, it also raised important ethical and regulatory questions that need to be addressed by the industry and society as a whole. The aim of the Erasmus+ project Transversal Skills in Applied Artificial Intelligence - TSAAI (KA220-HED - Cooperation Partnerships in higher education) has been to establish a training platform that will incorporate teaching guidelines based on a curriculum covering different areas of application of AI technology. In this work, we will focus on applying AI models in the financial and insurance sectors
Enabling Time-Synchronized Hybrid Networks With Low-Cost IoT Modules
No full textPrecisely synchronized communication is a major precondition for many industrial applications. At the same time, hardware cost and power consumption need to be kept as low as possible in the Internet of Things (IoT) paradigm. While many wired solutions on the market achieve these requirements, wireless alternatives are an interesting field for research and development. This article presents a novel IEEE802.11n/ac wireless solution, exhibiting several advantages over state-of-the-art competitors. It is based on a market-available wireless System on a Chip with modified low-level communication firmware combined with a low-cost field-programmable gate array. By achieving submicrosecond synchronization accuracy, our solution outperforms the precision of low-cost products by almost four orders of magnitude. Based on inexpensive hardware, the presented wireless module is up to 20 times cheaper than software-defined-radio solutions with comparable timing accuracy. Moreover, it consumes three to five times less power. To back up our claims, we report data that we collected with a high sampling rate (2000 samples per second) during an extended measurement campaign of more than 120 h, which makes our experimental results far more representative than others reported in the literature. Additional support is provided by the size of the testbed we used during the experiments, composed of a hybrid network with nine nodes divided into two independent wireless segments connected by a wired backbone. In conclusion, we believe that our novel Industrial IoT module architecture will have a significant impact on the future technological development of high-precision time-synchronized communication for the cost-sensitive industrial IoT market
LogIKTram
Get PDFDer Anstieg des urbanen Verkehrs belastet zunehmend die Anwohner, die Nutzer der Infrastruktur sowie die Umwelt. Während für die Personenbeförderung die Straßenbahnen eine Entlastung bieten, existieren für den innerstädtischen Logistikverkehr keine passenden Angebote. Aus diesem Grund verfolgt das Projekt LogIKTram das Ziel, den Logistikverkehr mit einer Gütertram auf die Schiene zu verlagern. Hierfür werden ein Logistikkonzept sowie verschiedene Planungsmodelle entwickelt, die eine vereinfachte Nutzung erlauben.The increase in urban traffic is affecting residents, infrastructure users and the environment. While trams offer relief for passenger transport, there are no suitable offers for inner-city logistics. For this reason, the LogIKTram project is pursuing the goal of shifting logistics traffic to rail using a freight tram. For this purpose, a logistics concept and various planning models, that allow simplified use, are being developed
On the unreasonable vulnerability of transformers for image restoration – and an easy fix
No full textFollowing their success in visual recognition tasks, Vision Transformers(ViTs) are being increasingly employed for image restoration. As a few recent works claim that ViTs for image classification also have better robustness properties, we investigate whether the improved adversarial robustness of ViTs extends to image restoration. We consider the recently proposed Restormer model, as well as NAFNet and the "Baseline network" which are both simplified versions of a Restormer. We use Projected Gradient Descent (PGD) and CosPGD for our robustness evaluation. Our experiments are performed on real-world images from the GoPro dataset for image deblurring. Our analysis indicates that contrary to as advocated by ViTs in image classification works, these models are highly susceptible to adversarial attacks. We attempt to find an easy fix and improve their robustness through adversarial training. While this yields a significant increase in robustness for Restormer, results on other networks are less promising. Interestingly, we find that the design choices in NAFNet and Baselines, which were based on iid performance, and not on robust generalization, seem to be at odds with the model robustness
Classification of Thermal Images for Human-Machine Differentiation in Human-Robot Collaboration Using Convolutional Neural Networks
No full textDifferentiation between human and non-human objects can increase efficiency of human-robot collaborative applications. This paper proposes to use convolutional neural networks for classifying objects in robotic applications. The body temperature of human beings is used to classify humans and to estimate the distance to the sensor. Using image classification with convolutional neural networks it is possible to detect humans in the surroundings of a robot up to five meters distance with low-cost and low-weight thermal cameras. Using transfer learning technique we trained the GoogLeNet and MobilenetV2. Results show accuracies of 99.48 % and 99.06 % respectively
Welcome to the 20th European Radar Conference
No full textWelcome to EuRAD 2023 – the first European Radar Conference taking place in the vibrant city of Berlin
Designing Socially Assistive Robots: Exploring Israeli and German Designers' Perceptions
No full textSocially assistive robots (SARs) are becoming more prevalent in everyday life, emphasizing the need to make them socially acceptable and aligned with users' expectations. Robots' appearance impacts users' behaviors and attitudes towards them. Therefore, product designers choose visual qualities to give the robot a character and to imply its functionality and personality. In this work, we sought to investigate the effect of cultural differences on Israeli and German designers' perceptions and preferences regarding the suitable visual qualities of SARs in four different contexts: a service robot for an assisted living/retirement residence facility, a medical assistant robot for a hospital environment, a COVID-19 officer robot, and a personal assistant robot for domestic use. Our results indicate that Israeli and German designers share similar perceptions of visual qualities and most of the robotics roles. However, we found differences in the perception of the COVID-19 officer robot's role and, by that, its most suitable visual design. This work indicates that context and culture play a role in users' perceptions and expectations; therefore, they should be taken into account when designing new SARs for diverse contexts