163559 research outputs found
Sort by
Impact of Job Applicants Negative Social Media Self-disclosure on Hiring Decisions and Employability
학위논문(석사) -- 서울대학교 대학원 : 사회과학대학 언론정보학과, 2024. 8. 신수연.채용 담당자들이 지원자의 소셜 미디어를 정보 자원으로 활용하고 있다. 이는 전통적 채용 관행에서는 지원자의 전략적 자기표현이 예상 되기 때문에, 그로 인해 충분히 해소되지 않는 지원자에 대한 불확실 성을 추가적인 정보로 해결하기 위한 것이다. 그러나, 하이퍼퍼스널 모델에 따르면, 소셜 미디어에서의 자기노출은 대면 소통만큼 혹은 그 이상으로 전략적 자기표현이 가능하다. 그렇다면 어떤 경우에 소셜 미 디어의 정보가 불확실성을 감소시키는가? 여러 게시글이 하나의 피드 를 이루는 소셜 미디어의 특성을 고려하면, 소셜 미디어에서는 지원자 의 단일한 자기노출이 단독적으로 제시되기 보다는 여러 개의 자기노 출이 혼재되어 제시된다. 이 점에 주목해 본 연구는 지원자의 소셜 미 디어 자기노출의 유인가의 조합과 비율이 지각된 진실성, 불확실성과 고용 가능성에 미치는 영향을 살펴보았다. 표본 500 명을 대상으로, 긍정적인 자기노출과 부정적인 자기노출의 비율이 다른 총 다섯 개의 조건에 대한 실험이 진행되었다. 그 결과, 부정적인 자기노출이 긍정 적인 자기노출과 함께 존재할 때, 긍정적인 자기노출만 있을 때보다 지원자에 대한 지각된 진실성이 높아지고 그에 따라 불확실성이 감소 했다. 그러나, 채용 결정 및 고용 가능성에는 긍정적인 영향을 미치지 못 하였다. 따라서, 지원자의 소셜 미디어를 보는 행위는 지원자에게 긍정적으로 작용하기 어렵기 때문에, 결국에는 기존 채용 문제인 전략 적 자기표현이 반복될 수 있다는 점에서 재고가 필요하다.In the hiring selection process, applicants' social media is being utilized as an information source. This is to reduce the uncertainty associated with applicants that may not be sufficiently addressed through traditional practices such as resume reviews and interviews, where strategic self-presentation is expected. However, according to the hyperpersonal model, self-disclosure on social media can be strategic as well. What factors in social media self-disclosure during the hiring selection process can reduce uncertainty? Considering the characteristic of social media where multiple posts form an individual's feed, multiple self-disclosures are simultaneously mixed and presented. Focusing on this aspect, this study examined the impact of the valence combinations of applicants' social media self-disclosure on reducing uncertainty and increasing employability. As a result, when negative self-disclosure coexists with positive self-disclosure, the perceived authenticity about the applicant increases compared to when only positive self-disclosure is present, thereby reducing uncertainty. However, it did not positively impact a hiring decision or employability. Therefore, Cybervetting is unlikely to have a positive effect on the applicant. Ultimately, it may need to be reconsidered as it can lead to the repetition of the existing issue of strategic self-presentation in hiring processes.제1 장 연구 배경 및 목적 1
제2 장 이론적 배경 및 선행 논의 2
제1 절 채용과 위조, 사이버베팅 2
제2 절 사이버베팅을 둘러싼 쟁점 3
제3 절 불확실성 감소 이론과 채용에서의 소셜 미디어 활용 5
제4 절 온라인에서의 자기노출과 보증 이론 6
제5 절 진실성 9
제6 절 자기노출의 유인가와 불확실성 10
1. 부정적인 자기노출로 인한 진실성 증가와 불확실성 감소 11
2. 부정적인 자기노출로 인한 불확실성 증가 12
제7 절 고용 가능성 14
제3 장 연구 가설 및 연구 질문 16
제4 장 실험 자극물과 사전 조사 18
제1 절 실험 자극물 제작 18
제2 절 1차 사전 조사 19
1. 개요 19
2. 결과 21
제3 절 2차 사전 조사 23
1. 개요 23
2. 결과 24
제4 절 3차 사전 조사 25
1. 개요 25
2. 결과 27
제5 장 연구 방법 28
제1 절 연구 개요 28
1. 연구 대상 28
2. 연구 절차 28
3. 주요 변수 측정 29
제6 장 연구 결과 31
제1 절 자극물 조작 검증 31
제2 절 기술 통계 및 상관관계 분석 33
제3 절 연구 가설 및 연구 질문 검증 34
1. 검증 34
2. 검증 35
3. 검증 37
4. 검증 39
5. 추가 분석 41
제7 장 종합 논의 42
제1 절 연구 결과 요약, 의의 및 제언 42
제2 절 연구 한계 및 제언 45
제3 절 결론 47
참고문헌 49
부록 67
Abstract 1석
Influence of Composition on Physical Properties of Zirconia-Alumina Dental Composites
학위논문(석사) -- 서울대학교 대학원 : 치과대학 치의과학과, 2024. 8. 안진수.1. Purpose Alumina and zirconia exhibit excellent biocompatibility and physical properties as dental materials. However, alumina's low fracture toughness and zirconia's strength degradation due to low-temperature degradation limit their use as monolithic materials in applications where stress concentration is expected. Therefore, research on composites such as zirconia toughened alumina (ZTA) and alumina toughened zirconia (ATZ), which use each other as reinforcement materials to compensate for these drawbacks, has been ongoing for several decades. Nonetheless, studies on the effect of the composition of tetragonal zirconia stabilizers on the properties of these composites have been limited. This study aims to investigate the feasibility of using these composites as materials for ceramic surgical drill applications by fabricating composites with varying alumina powder particle sizes and tetragonal zirconia stabilizer compositions. The research aims to identify the optimal composite for ceramic implant-related applications by observing changes in properties such as strength, fracture toughness, elastic modulus, hardness, coefficient of thermal expansion, thermal conductivity, and low-temperature degradation characteristics according to particle size and composition. 2. Materials and Methods 2.1. Specimen preparation Daiichi's HSY-3F-J-NA (NA), a tetragonal zirconia stabilized with 3 mol% Y₂O₃, was used as the reinforcement material. For the ZTA composites, alumina powders with different particle sizes—AKP-53 (∼0.22 μm), ALM-41-01 (∼1.6 μm), and ALM-43 (∼3.0 μm) from Sumitomo—served as the matrix phase. Additionally, ZTA composites were prepared using Tosoh's Zgaia (ZG), which is stabilized with 1.5 mol% Y₂O₃, and Vatechmcis's (Y,Nb)-TZP (ZI), which contains both Y₂O₃ and Nb₂O₅, as reinforcement materials. For the ATZ composites, ZG and ZI were used as the matrix phases with AKP-53 as the reinforcement material. Detailed information is provided below. 2.1.1. Preparation of ZTA specimens To optimize the dispersion of sub-micron-sized AKP-53 powder,
dispersants were added in varying amounts (0, 0.2, 0.5, and 1.0 wt%). Additionally, to enhance the formability of the ZTA specimens, the PEG #400 content was varied (0, 1, 2, and 3 wt%). The optimal composition was determined to be 0.2 wt% dispersant and 2 wt% PEG. Based on this, NA zirconia was added to the AKP-53 in amounts ranging from 0 to 40 wt%. The heating rate was varied (50, 100, 200, and 300°C/hr), and the final sintering temperature was set between 1500 and 1650°C. The optimal sintering conditions were identified as heating at 100°C/hr, maintaining 1600°C for 2 hours. Specimens were prepared under these conditions. Using the determined conditions for the NA53 composite, ZG53 and ZI53 composites were fabricated by sintering at temperatures ranging from 1450°C to 1600°C. 2.1.2. Preparation of ATZ specimens Based on the powder mixture additive compositions established for ZTA preparation, ATZ composites with zirconia matrix phases of ZG and ZI and AKP-53 added at 0-30 wt% were prepared. The AKP-53/ZG composites were sintered under conditions of 1250-1550°C (at 100°C intervals) for 2 hours, while the AKP-53/ZI composites were sintered at temperatures ranging from 1440 to 1480°C (at 20°C intervals) for 2 hours. 2.2. Property evaluation The sintered density was measured using the Archimedes method with distilled water. The biaxial strength was evaluated according to ISO 6872, and the fracture toughness was determined using the Vickers indentation fracture method. Vickers hardness was measured in accordance with ASTM C 1327-15(2019). The elastic modulus was calculated using ultrasonic velocity measurements. The coefficient of thermal expansion was assessed using high-temperature X-ray diffraction (XRD) in the range of 20-1200°C, and thermal conductivity was measured between 20-50°C according to KS L 1604. Additionally, the crystalline phase of zirconia and the microstructure of the composites were evaluated using room-temperature XRD and scanning electron microscopy (SEM), respectively. 3. Results and Discussion 3.1. ZTA In the NA/AKP-53 composites, the ZTA containing 20 wt% NA zirconia and sintered at 1600°C exhibited the most superior mechanical properties. It was observed that finer alumina particle sizes contributed to higher sintering driving forces, thus favoring densification. Additionally, the optimal sintering temperatures for composites mixed with 20 wt% of NA, ZG, and ZI as zirconia reinforcements were found to be 1600°C, 1500°C, and 1550°C, respectively, resulting in the highest strength and density values. After conducting low-temperature degradation tests at 134°C ± 2°C and 0.2 MPa for 5 hours, it was confirmed that the tetragonal zirconia phase in all composites was stabilized by the alumina matrix, preventing phase transformation to monoclinic zirconia and thereby avoiding low-temperature degradation. 3.2 ATZ In the ZTA experiments, the AKP-53 alumina, selected as the optimal reinforcement, was used to fabricate AKP-53/ZG and AKP-53/ZI composites. These composites exhibited the best mechanical properties when alumina contents were 30 wt% and 20 wt%, and sintered at 1450°C and 1480°C, respectively. The AKP-53/ZG composite showed slightly superior properties compared to the AKP-53/ZI composite. This is attributed to the larger microstructure of the AKP-53/ZI composite compared to AKP-53/ZG. However, in the low-temperature degradation tests, slight degradation was observed in the AKP-53/ZG composite despite its higher alumina content compared to AKP-53/ZI. This was attributed to the insufficient amount of stabilizer (1.5 mol% Y₂O₃), which was inadequate to effectively inhibit the phase transformation to monoclinic zirconia caused by grain growth during sintering at 1450°C. 4. Conclusion Considering thermal conductivity, which is crucial for rapid heat dissipation to minimize bone tissue damage during dental implant procedures, the 20AKP-53/ZI composite was determined to be the optimal material for dental implant drills. keywords : ZrO2, Al2O3, ZTA, ATZ, mechanical properties, LTD Student Number : 2022-2429치과용 지르코니아-알루미나 복합체 조성에 따른 물리적 특성 비교 김대호 치의과학 치과생체재료과학 전공 서울대학교 대학원 (지도교수 안진수) 1. 목 적 알루미나와 지르코니아는 치과 재료로서 우수한 생체 적합성과 물리적 특성을 보이지만 전자의 낮은 파괴인성과 후자의 저온열화에 의한 강도 저하 때문에 이 재료들이 응력 집중이 예상되는 응용분야에 단미 (monolith)로 쓰이는 데 한계가 있다. 따라서 두 재료의 단점을 보완하기 위해 서로를 물성 강화제로 사용한 복합체인 Zirconia Toughened Alumina (ZTA)와 Alumina Toughened Zirconia (ATZ)에 관한 연구는 수십 년에 걸쳐 현재까지 이어져 오고 있다. 그럼에도 불구하고 정방정 지르코니아 안정화제 조성이 이들 복합체의 물성에 미치는 영향에 대한 연구는 제한적이었다. 본 논문은 이들 복합체들을 임플란트 수술용 세라 믹 드릴 소재로의 활용 가능성을 확인하기 위해 알루미나 분말의 입도와 정방정 지르코니아 안정화제 조성을 달리한 복합체들을 제조하였다. 입 도와 조성에 따른 복합체의 강도, 파괴인성, 탄성계수, 경도, 열팽창계수, 열전도도 등의 물성 변화와 저온열화 특성의 관찰을 통해서 세라믹 임플 란트 관련 응용 소재로서의 최적 복합체를 도출하는데 연구 목적이 있 다. 2. 재료 및 실험 방법 2. 1. 시편제작 3 mol% Y2O3를 첨가하여 안정화된 정방정 지르코니아인 Daiichi 사의 HSY-3F-J-NA (NA)를 물성 강화제로 사용하고, 입자 크기가 다른 Smitomo 사의 알루미나 AKP-53 (∼0.22 μm), ALM-41-01 (∼1.6 μm), ALM-43 (∼3.0 μm)을 각각 기지상으로 한 ZTA와 1.5 mol% Y2O3를 첨 가한 Tosoh 사의 Zgaia (ZG), Y2O3에 Nb2O5가 추가로 첨가된 Vatechmcis 사의 (Y,Nb)-TZP (ZI)를 물성 강화제로 사용하고 AKP-53 을 기지상으로 한 ZTA, 그리고 AKP-53을 물성 강화제로 ZG와 ZI를 기 지상으로 한 ATZ를 제작하였으며 보다 상세한 내용은 다음과 같다. 2. 1. 1. ZTA 시편 제작 Sub-micron 크기의 AKP-53 분말의 분산 최적화를 위해 분산제 (5468CF)를 0, 0.2, 0.5, 1.0 wt%로 달리 첨가하고, ZTA 시편의 성형성 향상을 위해 PEG #400 함량을 0, 1, 2, 3 wt%로 변화시킨 결과, 최적 조성을 분산제 0.2 wt%와 PEG 2 wt%로 결정하였다. 이를 바탕으로 AKP-53에 NA 지르코니아를 0-40 wt%를 첨가하고 승온 속도를 50, 100, 200, 300°C/hr로 변화시킨 후 최종 소결 온도를 1500~1650°C 구간 에서 진행한 결과 100°C/hr 승온 후 1600°C, 2 hr 유지의 최적 소결 조 건을 확인하고 시편을 제작하였다. 이렇게 결정된 NA53 복합체의 조건 을 이용하여 ZG53, ZI53 복합체는 소결 온도 1450~1600°C에서 시편을 제작하였다. 2. 1. 2. ATZ 시편 제작 ZTA 제작에서 확보된 분말 혼합 첨가제 조성을 바탕으로 지르코니아 기지상을 ZG와 ZI로 달리하고 AKP-53을 0-30 wt% 첨가한 AKP-53/ZG 복합체는 최종 소결 온도를 1250-1550°C (100°C 간격) 범 위에서 2hr 유지 조건으로, AKP-53/ZI 복합체는 1440-1480°C (20°C 간 격) 범위에서 2hr 유지 조건을 적용하여 시편을 제작하였다. 2. 2. 물성 평가 증류수를 사용한 Archimedes 법으로 소결 밀도, ISO 6872에 따른 2축 강도, Vickers indentation fracture법에 의한 파괴인성, ASTM C 1327-15(2019) 따른 Vickers 경도, 음파 속도를 이용한 탄성계수, 20-1200°C 범위의 고온 X-ray 회절 (XRD)에 의한 열팽창계수, KS L 1604에 따라 20-50°C에서 열전도도를 측정했으며 상온 XRD와 SEM을 통하여 지르코니아의 결정상과 복합체의 미세 구조를 각각 평가하였다. 3. 결과 및 고찰 3. 1. ZTA NA/AKP-53 복합체에서 NA 지르코니아 20 wt%를 첨가하고 1600°C 에서 소결한 ZTA가 가장 우수한 기계적 특성을 보였고, 알루미나의 입 자 크기가 미세할수록 소결 구동력이 높아 치밀화에 유리한 것으로 나타 났다. 또한 NA, ZG, ZI를 지르코니아 강화제로 각각 20 wt% 혼합한 복 합체의 최적 소결 온도는 각각 1600°C, 1500°C, 1550°C에서 가장 높은 강도와 밀도값을 보였으며, 134°C ± 2°C, 0.2 MPa의 조건 하에서 5시간 실시한 저온열화 실험 후 모든 복합체의 정방정 지르코니아 상은 알루미 나 기지상에 의해 단사정으로 상전이가 억제되어 저온열화가 발생되지 않음을 확인하였다. 3. 2. ATZ ZTA 실험에서 최적의 알루미나로 선정된 AKP-53을 강화제로 제조한 AKP-53/ZG와 AKP-53/ZI 복합체는 각각 알루미나 함량 30 wt%와 20 wt%에서, 1450°C와 1480°C에서 소결했을 때 가장 좋은 물성을 보였는 으며, 53ZG가 53ZI보다 소폭 우수한 특성을 나타냈다. 이는 AKP-53/ZG 보다 큰 AKP-53/ZI 복합체의 미세구조에 기인한다고 판단한다. 그러나 저온열화 실험에서 AKP-53/ZG의 경우 AKP-53/ZI 보다 높은 알루미나 함량임에도 불구하고 소폭의 저온열화가 관찰된 것은 1.5 mol% Y2O3 첨 가량이 1450°C의 소결에 따른 입성장에 의한 단사정으로의 상전이를 효 과적으로 억제하는데 안정화제의 양이 부족했던 것으로 판단하였다. 4. 결론 치과용 임플란트 드릴 소재로서 골 조직 손상 최소화를 위한 빠른 열 방출과 관련된 열전도도를 최우선적으로 고려할 때 20AKP-53/ZI가 임 플란트 시술용 드릴을 위한 최적의 복합체인 것으로 판단하였다. 주요어 : ZrO2, Al2O3, ZTA, ATZ, mechanical properties, 저온열화 학 번 : 2022-242941. 서론 · 1
2. 재료 및 방법 10
2. 1. 분말 정보 11
2. 2. 시편 제작 13
2. 2. 1. ZTA 13
2. 2. 2. ATZ 14
2. 3. 기계적 물성 평가 15
2. 4. 결정상 및 미세구조 분석 18
2. 5. 열적 특성 평가 18
3. 결과 및 고찰 20
3. 1. ZTA 20
3. 1. 1. 분산제 함량이 2축 강도에 미치는 영향 · 20
3. 1. 2. PEG 함량이 물성에 미치는 영향 23
3. 1. 3. 승온 속도가 2축 강도에 미치는 영향 28
3. 1. 4. 소결 온도가 2축 강도에 미치는 영향 31
3. 1. 5. 지르코니아 첨가량이 물성에 미치는 영향 34
3. 1. 5. 1. 2축 강도 34
3. 1. 5. 2. 경도 · 37
3. 1. 5. 3. 파괴인성 38
3. 1. 5. 4. 소결 밀도와 탄성계수 39
3. 1. 6. 알루미나 분말 입도가 물성에 미치는 영향 · 41
3. 1. 7. 지르코니아 종류에 따른 물성 변화 44
3. 2. ATZ 50
3. 2. 1. ATZ-53ZG 50
3. 2. 1. 1. 2축 강도 50
3. 2. 1. 2. 탄성계수와 파괴인성 · 55
3. 2. 1. 3. 저온열화 실험 · 58
3. 2. 2. ATZ-53ZI 59
3. 2. 2. 1. 2축 강도 59
3. 2. 2. 2. 탄성계수와 파괴인성 · 60
3. 2. 2. 3. 저온열화 실험 · 62
3. 2. 3. 53ZG & 53ZI의 최적 물성과 미세구조 63
3. 2. 4. 열전도도 64
4. 결론 67
참고문헌 69
Abstract 79석
Polyphonie dans les textes éditoriaux français : sa réalisation et ses effets discursifs
학위논문(석사) -- 서울대학교 대학원 : 인문대학 불어불문학과, 2024. 8. 이성헌.본 연구의 목표는 프랑스어 신문 사설 텍스트에서 나타나는 다성(polyphonie)이 텍스트에서 제기되는 주장의 설득력을 제고하는 효과를 가진다는 것을 보이는 것이다.
이를 위해 먼저 신문 사설 텍스트가 가지는 핵심적인 두 특성을 설명한다. 그리고 이를 바탕으로, 신문 사설 텍스트를 분석하기 위해 언어학적 개념인 다성을 도입하는 것의 필요성을 보인다.
이어서는 분석 도구로서 채택된 다성에 대한 정의를 제시한다. 이를 위해서 우선 문학 이론으로서의 다성과 구분되는 언어학적 다성만의 특성을 제시하고, 이를 정의하기 위한 기초적인 개념들을 도입한다. 그런 다음에는 이러한 과정을 거쳐 확립된 정의를 기준 삼아, 그에 부합하는 다양한 언어적 요소들을 검토하여 다성 표지들의 목록을 구성한다. 그리고 이들에게서 발견되는 공통점에 주목하여 다성이 개별 발화체 내에서 화자의 관점을 강화하는 효과를 가질 수 있음을 보인다.
마지막으로, 위에서 마련한 표지들을 활용하여 실제 신문 사설 텍스트에서 나타난 다성의 실현 양상과 그 담화 효과를 분석하는 작업을 수행한다. 이에 앞서, 기존의 다성을 통한 신문 사설 텍스트 분석 연구들을 비판적으로 검토하고, 이들의 한계를 보완할 수 있는 새로운 분석 방법을 정립한다. 텍스트 분석을 통해서는 다성이 가지는 관점 강화 효과가 개별 발화체를 넘어 사설 텍스트 전체에서도 나타날 수 있음을 결과로서 제시한다.
주요어 : 통합화용론, 다성 이론, 담화분석, 신문 사설, 언론 담화
학 번 : 2021-28599L'objectif de cette étude est de démontrer que la polyphonie, présente dans les textes éditoriaux français, a pour effet de renforcer la persuasivité de lopinion de lauteur.
Pour ce faire, nous commençons par examiner les deux caractéristiques principales des textes éditoriaux. Puis, en se basant sur ces caractéristiques, la nécessité d'introduire la notion de polyphonie est mise en avant.
Ensuite, nous proposons la définition de la polyphonie, loutil danalyse important de cette étude. Pour faciliter la compréhension, les caractéristiques propres à la polyphonie dans le domaine de la linguistique, distinctes de celle de M. Bakhtine, sont évoquées en amont. Les concepts de « sujets », essentiels pour la définir sont aussi introduits. Une fois la définition établie, nous essayons délaborer la liste des marqueurs polyphoniques, en examinant de dives éléments linguistiques. Puis, nous expliquons que la polyphonie peut avoir pour effet de renforcer le point de vue du locuteur au sein d'un énoncé.
Enfin, à laide des marqueurs polyphoniques, nous procédons à lanalyse de la réalisation de la polyphonie dans des textes éditoriaux français et ses effets discursifs. Dabord, les difficultés quont en commun les études existantes sont évoquées. Puis, les éléments susceptibles de les compenser sont alors adoptés. À travers le processus danalyse, nous démontrons que l'effet de renforcement généré par la polyphonie au niveau dun énoncé isolé peut s'étendre jusquau niveau de l'ensemble dun texte éditorial.
keywords : pragmatique intégrée, théorie de la polyphonie, analyse du discours, genre éditorial, discours journalistique
Student Number : 2021-28599목 차
서론 1
본론 3
1. 신문 사설 텍스트 3
1.1. 신문 사설 텍스트의 특징 3
1.1.1. 설득 텍스트 3
1.1.2. 여러 의견이 혼재하는 텍스트 5
1.2. 신문 사설 텍스트 분석에서 다성의 필요성 7
2. 다성 9
2.1. 다성의 이론적 배경 9
2.1.1. 바흐친의 다성 10
2.1.2. 언어학에서의 다성 11
2.1.3. 언어학적 다성과 바흐친의 다성의 차이 13
2.2. 발화 주체의 유형과 그들 사이의 관계 15
2.2.1. 말하는 주체와 화자 간 불일치 17
2.2.2. 화자와 발화행위자 간 불일치 19
2.3. 다성의 정의와 그 실현의 예 22
3. 다성의 표지와 담화 효과 26
3.1. 다성의 표지 26
3.1.1. 논쟁적 부정 26
3.1.2. 연결사 – 논증의 mais 31
3.1.3. 연결사 – puisque 33
3.1.4. 인식 조건법 35
3.1.5. 전달화법 38
3.1.6. 분열구문 42
3.1.7. 언어외적 지식 46
3.2. 다성의 담화 효과 – 화자의 주장 강화 49
3.2.1. 대비에 의한 주장 강화 51
3.2.2. 논거 보완에 의한 주장 강화 53
4. 신문 사설 속 다성의 실현 양상과 담화 효과 55
4.1. 다성 기반 신문 사설 분석의 새로운 방법 55
4.1.1. 기존 다성 기반 신문 사설 분석의 한계 55
4.1.2. 분석의 한 방법 – 다성 중심의 텍스트 구조화 56
4.2. 다성의 신문 사설 텍스트상 담화 효과 분석 58
4.2.1. 사설 텍스트 분석 (i) 58
4.2.1.1. 개별 발화체의 다성 (i) 61
4.2.1.2. 다성 발화체 – 비다성 발화체 간 관계 (i) 64
4.2.1.3. 다성 발화체를 중심으로 한 텍스트 구조화 (i) 68
4.2.2. 사설 텍스트 분석 (ii) 72
4.2.2.1. 개별 발화체의 다성 (ii) 74
4.2.2.2. 다성 발화체 – 비다성 발화체 간 관계 (ii) 77
4.2.2.3. 다성 발화체를 중심으로 한 텍스트 구조화 (ii) 80
4.2.3. 사설 텍스트 분석 (iii) 83
4.2.3.1. 개별 발화체의 다성 (iii) 86
4.2.3.2. 다성 발화체 - 비다성 발화체 간 관계 (iii) 89
4.2.3.3. 다성 발화체를 중심으로 한 텍스트 구조화 (iii) 91
결론 94
참고문헌 96
Résumé 102석
Les emplois et les propriétés essentielles de la préposition en
학위논문(석사) -- 서울대학교 대학원 : 사범대학 외국어교육과(불어전공), 2024. 8. 심봉섭.프랑스어 전치사 en은 매우 다양한 용법으로 사용되는데, 용법들 가운데 유사성을 포착하기가 쉽지 않아 en의 정체성이 무엇인지에 대한 의문이 제기된다. 본 연구는 en의 용법을 분류하여 각 유형의 특성을 파악하고, 모든 용법의 기저에 있는 en의 불변소를 밝히는 것을 목적으로 한다.
본격적인 논의에 앞서 사전과 문법서에서 기술하는 en의 내용을 살펴보며 en의 전반적인 용법과 특성을 개괄하는 동시에 한계점을 분석하고, 언어학 분야에서 en이 연구된 주요 흐름을 살펴본다. 기존의 많은 연구에서는 en의 본질적 가치에 초점을 두어 en의 용법에 대한 체계적인 정리는 비교적 부족하였는데, De Mulder & Amiot(2013)는 en이 문맥에 따라 어떻게 해석되는지를 분류하여 정리한 점에서 다른 연구들과 차별점이 있다. 본 연구에서는 이들의 연구 결과를 기반으로 한계점을 보완하여 en의 새로운 용법 분류를 시도한다.
본 연구에서는 en의 용법을 크게 다섯 가지로 분류한다. 첫째는 위치 지정으로, 공간적 위치와 시간적 위치로 세분된다. 둘째는 상태를 나타내는 용법으로, 일시적 상태와 결과적 상태로 나뉜다. 셋째는 사행 및 발화의 방식, 넷째는 의미 적용 영역, 다섯째는 구성을 나타내는 용법이다. 한편, 문장 내에서 en이 나타내는 의미적인 관계를 [X en Y]로 표현했을 때, Y는 en의 보어에 해당하고, X는 en을 통해 Y와 관계 맺어지는, 전치사구 바깥의 요소를 가리킨다. 다섯 가지로 분류한 각각의 용법 유형에 대해 Y의 어휘적 특성과 통사적 특성, en Y의 통사적 특성, [X en Y]의 해석을 순서대로 논하며 유형별 특성을 살펴본다.
그리고 Guillaume(1919), Gougenheim(1950), Franckel & Lebaud(1991), Cadiot(1997), Khammari(2006), Homma(2011) 등 en의 본질적 의미에 관한 기존의 연구 결과를 종합하여, 다섯 가지 en의 용법의 바탕이 되는 en의 본질적 속성을 차원성, 일체화, 비본질적 특징 부여의 세 가지로 정리한다. 또한 이러한 en의 본질적 속성이 en의 통사적 특성에도 영향을 준다는 점을 밝힌다.
마지막으로, 앞선 논의를 en의 교육에 적용하여 한국인 학습자를 대상으로 한 en의 단계적 교수·학습 방안을 제안한다. 이를 위해 먼저 en이 한국어에서 어떻게 대응되는지 살펴보고, en 학습의 현황과 해결해야 할 과제를 검토한다. 이후 en의 본질적 속성과 용법들을 포괄적으로 학습할 수 있도록 고안된 8단계의 학습 방안을 대표 예문과 설명을 통해 제시한다.La préposition en possède des emplois extrêmement variés, parmi lesquels il est difficile de trouver des similitudes. Cela nous a ainsi amenés à nous interroger sur lidentité de cette préposition. Dans cette étude, nous avons eu pour objectif non seulement de classifier les emplois de la préposition en et danalyser les propriétés de chaque classe, mais aussi de révéler les invariants de la préposition qui sont à la base de tous ses emplois.
Dans la première partie de notre recherche, nous avons examiné les études précédentes sur en. Ensuite, nous avons tenté dexpliquer en détail les cinq types demplois de cette préposition ainsi que ses propriétés essentielles. Pour finir, nous avons proposé un plan denseignement/apprentissage visant à favoriser une compréhension globale de en.
Afin desquisser les emplois de en et ses caractéristiques, nous avons consulté les descriptions de en présentes dans les dictionnaires et des livres de grammaire. Puis nous avons examiné les grands courants dans lesquels la préposition en a été étudiée en linguistique. De nombreuses études existantes se sont penchées sur la valeur essentielle de en, mais elles nont pas pris le soin de répertorier les emplois de cette préposition. La recherche de De Mulder et Amiot (2013) diffère des autres études dans la mesure où ces deux linguistes ont classifié les interprétations de en en fonction des types de construction où en était contenue. Sur la base de leurs résultats, nous avons tenté de classer de nouveau les emplois de la préposition en en complétant leur recherche.
Dans une deuxième partie, nous avons proposé une classification de en en cinq types demplois principaux. Le premier se porte sur la localisation se subdivisant en localisation spatiale et localisation temporelle. Le deuxième correspond à lemploi indiquant un état qui regroupe un état transitoire et un état résultatif. Le troisième type demploi renvoie à la manière de procès et d'énonciation, et le quatrième, au domaine dapplication sémantique. Enfin, le cinquième type demploi constitue la composition. Dans cette étude, la relation que représente en a été exprimée par [X en Y], dans laquelle Y correspond au complément de en et X renvoie à un élément se situant à lextérieur du syntagme prépositionnel et qui est lié à Y via en. Pour chaque emploi, nous avons discuté des propriétés lexicales et syntaxiques de Y, des propriétés syntaxiques du syntagme « en Y » et de l'interprétation de la construction [X en Y]. En synthétisant les résultats des études de Guillaume (1919), Gougenheim (1950), Franckel & Lebaud (1991), Cadiot (1997), Khammari (2006) et Homma (2011), sur la valeur essentielle de en, nous avons pu constater que les propriétés essentielles de en sous-jacentes à ses cinq types demplois correspondaient à « la dimensionnalité », « lidentification » et « la caractérisation non essentielle ». Ces trois propriétés sémantiques affectaient également les propriétés syntaxiques de en.
Dans la dernière partie, en incorporant les résultats de notre recherche à lenseignement de la préposition en pour les apprenants sud-coréens, nous avons proposé un plan denseignement et dapprentissage par étapes. Pour ce faire, nous avons analysé la manière dont cette préposition sexprimait en coréen, puis avons examiné les problèmes et les défis liés à lenseignement/apprentissage de en. Pour finir, nous avons développé un plan d'apprentissage en 8 étapes : localisation, domaine dapplication sémantique, composition, état résultatif, manière de procès, manière dénonciation, état transitoire, interprétations selon le cotexte. Ce plan a été conçu afin de faire apprendre de manière exhaustive les propriétés essentielles et les emplois de en.제 1 장 서론 1
제 2 장 'en'에 대한 선행 연구 5
2.1. 사전에서의 'en'의 용법 분류 5
2.2. 'en'에 대한 문법서의 설명 10
2.3. 'en'의 언어학적 연구 13
2.3.1. 'en'의 주요 연구 13
2.3.2. De Mulder & Amiot(2013) 17
제 3 장 'en'의 용법 26
3.1. 위치 지정(localisation) 27
3.1.1. 공간적 위치(localisation spatiale) 28
3.1.1.1. Y의 어휘적 특성 28
3.1.1.2. Y의 통사적 특성 34
3.1.1.3. 'en Y'의 통사적 특성 37
3.1.1.4. [X en Y]의 해석 38
3.1.2. 시간적 위치 (localisation temporelle) 47
3.1.2.1. Y의 어휘적 특성 47
3.1.2.2. Y의 통사적 특성 49
3.1.2.3. 'en Y'의 통사적 특성 54
3.1.2.4. [X en Y]의 해석 55
3.1.3. 요약 57
3.2. 상태(état) 58
3.2.1. 일시적 상태 60
3.2.1.1. Y의 어휘적 특성 60
3.2.1.2. Y의 통사적 특성 63
3.2.1.3. 'en Y'의 통사적 특성 64
3.2.1.4. [X en Y]의 해석 65
3.2.2. 결과적 상태 65
3.2.2.1. Y의 어휘적 특성 66
3.2.2.2. Y의 통사적 특성 66
3.2.2.3. 'en Y'의 통사적 특성 67
3.2.2.4. [X en Y]의 해석 68
3.2.3. 요약 70
3.3. 사행 및 발화의 방식 71
3.3.1. 사행의 방식 71
3.3.1.1. Y의 어휘적 특성 72
3.3.1.2. Y의 통사적 특성 78
3.3.1.3. 'en Y'의 통사적 특성 80
3.3.1.4. [X en Y]의 해석 80
3.3.2. 발화의 방식 84
3.3.2.1. Y의 어휘적 특성 85
3.3.2.2. Y의 통사적 특성 86
3.3.2.3. 'en Y'의 통사적 특성 87
3.3.2.4. [X en Y]의 해석 87
3.3.3. 요약 92
3.4. 의미 적용 영역 92
3.4.1. Y의 어휘적 특성 93
3.4.2. Y의 통사적 특성 94
3.4.3. 'en Y'의 통사적 특성 95
3.4.4. [X en Y]의 해석 96
3.5. 구성 99
3.5.1. Y의 어휘적 특성 99
3.5.2. Y의 통사적 특성 100
3.5.3. 'en Y'의 통사적 특성 101
3.5.4. [X en Y]의 해석 102
3.6. 결론 105
제 4 장 'en'의 불변소 107
4.1. 'en'의 본질적 속성 107
4.1.1. 차원성 107
4.1.2. 일체화 109
4.1.3. 비본질적 특징 부여 112
4.2. 'en'의 본질적 속성과 통사적 특성과의 관계 113
4.3. 종합 114
제 5 장 'en'의 교육적 고찰 115
5.1. 'en'의 한국어 대응소 115
5.1.1. en Y Y-에/에서 115
5.1.2. en Y Y-(으)로 119
5.1.3. 기타 121
5.2. 'en' 교육의 현황과 과제 123
5.2.1. 전치사 교육과 'en' 학습 123
5.2.2. 언어 수준별 학습 내용 125
5.2.3. 'en'의 학습 요소 125
5.3. 'en'의 단계적 교수학습 방안 126
5.4. 결론 138
제 6 장 결론 140
Bibliographie 144
Résumé 149석
A Qualitative Study on the Experience and Needs of Teachers to Activate Online Learning in Art Museums
학위논문(석사) -- 서울대학교 대학원 : 사범대학 협동과정 미술교육전공, 2024. 8. 김형숙.본 논문은 미술 교사들의 인식과 경험을 토대로 학교-미술관 연계 교육의 의미와 목적, 학교-미술관 연계 온라인 교육의 필요성 및 실태를 분석하고, 미술 교사들의 요구를 도출하는 것에 목적을 둔다. 학교-미술관 연계 교육의 경험과 학교 현장 및 학생에 대한 충분한 이해를 수반한 미술 교사들의 인식을 분석해 추후 학교-미술관 연계 온라인 교육의 방향을 제시하고 활성화를 돕고자 한다. 연구 목적을 달성하기 위한 구체적인 연구 문제는 다음과 같다. 첫째, 학교-미술관 연계 온라인 교육에 대한 미술 교사의 인식과 경험은 어떻게 드러나는가? 둘째, 학교-미술관 연계 온라인 교육에 대한 미술 교사의 요구에는 무엇이 있는가?
본 연구의 연구 대상은 중등 미술 교사 6명으로, 학교 근무 경력이 5년차 이상이며 학교-미술관 연계 교육 실천 경험이 있는 교사들을 의도적 표본 추출을 통해 선정하였다. 연구방법은 반구조화된 질문지를 활용한 면담을 중심으로 질적 연구를 수행하였으며 수집된 자료는 질적 자료 분석 기법을 통해 총 11개의 범주를 도출하였다. 본 연구의 결과를 요약하면 다음과 같다. 첫째, 교사들이 인식하는 학교-미술관 연계 교육의 의미와 목적은 미래의 문화향유자로 성장, 예술가적 상상과 체험으로 도출되었다.둘째, 교사들이 인식하는 학교-미술관 연계 온라인 교육의 필요성은 문화격차 해소와 미술관 연계 교육의 지속성 확장, 동시대 흐름에 꼭 필요한 변화로서 교육 방식, 전문가의 시선으로 한 층 더 풍성해지고 다각화된 수업으로 도출되었다. 셋째, 교사들이 인식하는 학교-미술관 연계 온라인 교육의 실태는 디지털 미술관 기반의 학생중심 탐구수업, 공급자로서 미술관, 수요자로서 학교, 미술관의 홍보 부족과 학생 평가 적용의 어려움으로 도출되었다. 넷째, 교사들이 인식하는 학교-미술관 연계 온라인 교육의 요구는 충분한 소통을 통한 미래 미술관 연계 교육의 방향 재고, 교육 실천 주체들의 인식 개선 및 전문성 향상, 디지털 환경에 적절한 교수·학습전략의 개발로 도출되었다.
미술관 온라인 교육에 대한 교사의 인식을 살피는 선행연구는 수가 매우 적으며, 그 중 아직 중등 미술 교사만을 대상으로 질적 연구를 실행한 경우는 없다. 본 연구는 학교 현장에 대한 이해와 학생에 대한 경험적 지식을 가진 미술교사들의 목소리를 통해 미술관 연계 온라인 교육에 대한 총체적인 인식 및 경험을 드러내기에 중요성을 갖는다. 또한 기존에 미술관 홈페이지나 플랫폼을 통해 제공되는 콘텐츠의 분석이나 활용 위주로 진행되었던 미술관 온라인 교육 연구의 한계를 극복하고 온라인상의 교수자-학습자, 학습자-학습자 사이의 상호작용에 보다 초점을 맞추어 논의를 확장하고자 했다는 데에 의의가 있다.Based on the perceptions and experiences of art teachers, this study analyzes the meaning and purpose of Art Museum education for students, the necessity and actual state of online learning programs in art museum, and derives the needs of art teachers. By analyzing the experience and the perception of art teachers with a sufficient understanding of the school field and students, Researcher intends to suggest the direction of online learning in art museum for students in the future and help activate it.
The specific research questions to achieve the research objectives are as follows.
First, how is the perception and experience of art teachers about online learning in art museum? Second, what is the demand of art teachers for online learning in art museum?
The subjects of this study were 6 secondary art teachers, and teachers with more than 5 years of school work experience and experience in Art Museum education practice were selected through intentional sampling. As for the research method, a qualitative study was conducted centering on interviews using semi-structured questionnaires, and a total of 11 categories were derived for the collected data through qualitative data analysis techniques.
The results of this study are summarized as follows.
First, the meaning and purpose of Art Museum education for students recognized by teachers were derived as 'growth as future cultural entertainers' and 'artistic imagination and experience'.
Second, the need for Art Museum education for students recognized by teachers was derived as "Dismissing Cultural Gaps and Expanding the Sustainability of Art Museum education," "Educational Methods as Essential Changes in Contemporary Trends," and "a More Enriched and Diversified Class from the Perspective of Experts."
Third, the actual state of Art Museum online education for students recognized by teachers was derived as "Digital Art Museum-based Student-centered Inquiry Class," "Art Museum as a Supplier, School as a Consumer," and "Lack of Promotion of Art Museums and Difficulties in Applying Student Evaluation."
Fourth, the demand for Art Museum online education for students recognized by teachers was Rethinking the Direction of Future Art Museum Education through sufficient communication, Efforts to Improve the Awareness and Professionalism of Education Practitioners, and Development of Teaching and Learning Strategies Appropriate to the Digital Environment.
There are very few studies examining teachers' perceptions of online education in art museum, and none of them have yet conducted qualitative research only on secondary art teachers. This study is important in revealing the overall perception and experience of online education in Art Museum through the voices of art teachers with an understanding of the school field and empirical knowledge of students. It is also meaningful that this study was intended to expand the discussion by focusing more on online interactions between instructors-learners and learners-learners by overcoming the limitations of previous researches, because most researches focused mainly on analyzing or utilizing online educational contents provided through art museum websites or platforms.제 1 장 서론 1
제 1 절 연구의 목적 1
제 2 절 연구 내용 3
제 3 절 연구의 중요성 5
제 4 절 용어 정의 7
제 2 장 이론적 배경 8
제 1 절 미술관 온라인 교육 8
1. 미술관 온라인 교육의 특성 8
2. 미술관 온라인 교육의 교육적 가치 14
3. 미술관 온라인 교육과 학교 교육의 연계 16
제 2 절 해외의 학교 미술관 연계 온라인 교육 프로그램 사례 29
1. 노스캐롤라이나 미술관(North Carolina Museum of Art)의 플립드 뮤지엄 프로그램 : Leaders Among Us 30
2. 크리스탈 브리지 미술관(Crystal Bridges Museum of American)의 온라인 프로그램 : Museum Mash Up 39
제 3장 연구 방법 48
제 1절 연구 참여자 선정 50
제 2절 자료 수집 및 분석 54
1. 자료 수집 54
2. 자료 분석 55
제 4 장 연구 결과 57
제 1 절 학교 미술관 연계 온라인 교육에 대한 미술교사의 인식 57
1. 학교 미술관 연계 교육의 의미와 목적 57
2. 학교 미술관 연계 온라인 교육의 필요성 63
3. 학교 미술관 연계 온라인 교육의 실태 70
제 2 절 학교 미술관 연계 온라인 교육에 대한 미술교사의 요구 86
1. 충분한 소통을 통한 미래 미술관 연계 교육의 방향 재고 86
2. 교육 실천 주체들의 인식 개선 및 전문성 향상 89
3. 디지털 환경에 적절한 교수 학습 전략의 개발 92
제 5 장 결론 97
제 1 절 연구 결과 요약 97
제 2 절 한계점 및 제언 104
참고문헌 105
Abstract 111석
특허권 보유를 중심으로
학위논문(석사) -- 서울대학교 대학원 : 행정대학원 공기업정책학과, 2024. 8. 이수영.In response to the unprecedented economic crisis caused by the COVID-19 pandemic, the Korean government has implemented a variety of financial support measures through policy financial institutions based on an expansionary fiscal policy. In particular, financial support for vulnerable sectors such as small and medium-sized enterprises (SMEs) and small business owners, which are directly threatened by the COVID-19 crisis, has been rapidly expanded. In addition to direct financial support, indirect financial support measures such as extending the maturity of existing loans and guarantees, and deferring repayments have also been provided. Throughout this process, potential risks to the overall economy have increased due to the accumulation of corporate debt and the surge in zombie companies resulting from liquidity expansion. As the post-COVID era brings high inflation, high interest rates, and high exchange rates, the issue of zombie companies is becoming increasingly significant. This is further highlighted by preceding studies that suggest supporting zombie companies with limited policy funds hinders efficient allocation, thereby depriving the nation of opportunities for productivity, growth, and job creation.
Motivated by these concerns, this study empirically analyzes the financial performance of policy financing support for zombie companies through credit guarantees, a sector of policy finance. Additionally, it examines which characteristics of zombie companies have a significant impact on their escape (transition to normal companies).
The first study examined the difference in financial performance between companies that received credit guarantees and those that did not. Specifically, the study targeted companies classified as zombie companies at the end of each year from 2013 to 2019. Companies that received credit guarantees in the following year(2014 to 2020) were classified as the treatment group, while companies that did not receive credit guarantees were classified as the control group. The PSM-DID analysis was used to examine whether there were differences in financial performance due to the guarantees. The analysis revealed that credit guarantee support for zombie companies was not significantly effective in improving their growth and profitability. However, it did have a positive long-term effect on stability, particularly on the "interest coverage ratio" which is a key indicator for assessing zombie companies.
Based on these results, the analysis examined which characteristics of zombie companies positively influenced their transition to normal companies if credit guarantee support was effective in improving the interest coverage ratio (normalization of zombie companies). The analysis results showed that having a dedicated research organization did not contribute to the normalization of zombie companies. However, companies holding patents, indicating technological strength, were 2.253 times more likely to transition to normal status compared to those without patents.
Policy financial institutions must consider their public nature given their establishment objectives. Unlike conventional financial institutions, they cannot operate freely from the perspective of social and economic equity. However, given the limited nature of policy funds, it is essential to balance public service tailored to the expectations of citizens with efficiency.
In this sense, this study carries the following policy implications. Instead of unconditionally avoiding policy support for identified zombie companies, it's necessary to identify areas for reducing and expanding support through a discerning approach to identifying viable and non-viable zombie companies. In other words, for zombie companies that cannot even cover their interest expenses with operating profits, a gradual and incremental reduction policy is needed, such as reducing new support and inducing repayment of existing support, to minimize the impact on the economy and finance. On the other hand, for zombie companies with technological prowess such as those holding patents, as well as those facing short-term financial difficulties due to factors like interest rate hikes or temporary liquidity shortages, it's crucial to carefully assess their technological capabilities, innovation potential, and growth prospects. Active support should be provided to these companies to capitalize on their strengths and facilitate their potential for growth.정부는 코로나19 경제위기에 대응하기 위하여 확장적 재정정책 을 바탕으로 정책금융기관을 통해 다양한 금융 지원책을 마련하였 다. 특히 미증유의 코로나19 위기로 직접적인 피해가 우려되는 중 소기업과 소상공인 등 취약부문에 대한 금융 지원이 급격히 확대 해 왔다. 직접적인 금융 지원뿐만 아니라 기존 대출·보증의 만기 연장, 상환유예조치 등 간접적인 금융 지원도 이루어졌다. 이러한 과정에서 유동성 확대에 따른 기업부채 누적과 한계기업 급증 등 경제 전반에 잠재 리스크가 확대되어 왔고, 포스트 코로나 이후 고물가·고금리·고환율 시기가 도래함에 따라 한계기업에 대한 문 제가 더욱 비중 있게 다루어지고 있다. 이는 한정된 정책자금으로 한계기업을 지원하는 것이 효율적 배분을 저해하고, 국가 전반의 생산성과 성장, 고용 창출의 기회를 박탈한다는 부정적 기조의 선 행연구로 인해 그 심각성이 더욱 크게 조명되고 있다. 본 연구는 이러한 문제의식을 발단으로 정책금융의 한 영역인 신용보증을 통해 한계기업에 대한 정책금융지원의 재무성과를 실 증 분석하고, 한계기업의 어떤 특성이 한계기업의 탈출(정상기업으 로의 전환)에 유의미한 영향을 끼치는지 살펴보았다. 첫 번째 연구에서는 2013년부터 2019년까지 각 연도말 기준 한 계기업으로 판정된 기업을 대상으로, 차년도(2014년부터 2020년까 지)에 신용보증을 받은 기업을 실험집단으로, 신용보증을 받지 못 한 기업을 통제집단으로 구분하여 PSM-DID 분석을 통해 보증의 재무적 성과에서 차이가 있는지를 살펴보았다. 분석 결과, 한계기 업에 대한 신용보증 지원이 해당 기업의 성장성과 수익성에는 유 의미하게 효과적이지 않은 것으로 나타났으나, 안정성, 특히 한계 기업의 판단 지표인 이자보상비율의 성과에는 장기적으로 정(+) 의 효과가 있는 것으로 확인되었다. 이 결과를 바탕으로, 한계기업에 대한 신용보증 지원이 이자보 상비율의 개선(한계기업의 정상화)에 효과적이었다면, 어떤 특징을 가지는 한계기업이 정상기업으로의 전환에 긍정적인 영향을 주는 지를 분석하였다. 분석 결과, 연구전담조직 보유 여부는 한계기업 의 정상화에 도움이 되지 않는 것으로 확인되었으나, 기업의 기술 력을 나타내는 특허권을 보유한 기업은 미보유 기업 대비 정상화 가능성이 2.253배 높은 것으로 나타났다. 정책금융기관은 설립목적 상 공공적 성격을 고려해야 하며, 민 간 금융기관과는 달리 사회 경제적인 형평성 측면에서 자유로울 수 없다. 다만 정책자금이라는 한정된 재원의 사용에 있어, 효율성 의 측면 또한 고려해야 한다는 점에서, 국민 눈높이에 맞는 공공 성과 효율성을 균형있게 지원해야 할 필요가 있다. 이러한 의미에서 본 연구는 다음과 같은 정책적 함의를 가진다. 한 계기업으로 판명된 기업들에 대해 무조건적으로 정책지원을 지양할 것이 아니라, 한계기업에 대한 옥석 가리기를 통해 지원 축소 영역과 지원 확대 영역을 선별할 필요가 있다. 즉, 영업이익으로 이자 비용 조차 감당하지 못하는 한계기업에 대해서는 경제 및 금융에 미치는 충격을 최소화하는 방향으로 신규 지원 감축, 기존 지원의 상환 유도 등 단계적·점진적 축소 정책이 필요할 것이다. 반면, 특허권 보유 기 업 등 기술력이 있는 한계기업과 금리 인상, 일시적 자금경색 등 단 기적으로 재정 어려움이 있는 한계기업은 기업의 기술력, 혁신성, 성장 가능성 등을 면밀히 파악해 적극 지원할 필요가 있다. 주요어 : 신용보증, 한계기업, 재무성과, 정상기업 전환, 특허권 학 번 : 2023-28422제 1 장 서 론 1
제 1 절 연구의 목적 및 필요성 1
제 2 절 연구의 범위 및 방법 4
제 2 장 이론적 논의와 선행연구 검토 5
제 1 절 이론적 논의 5
1. 한계기업 5
2. 정책금융 7
3. 신용보증 9
제 2 절 선행연구 검토 11
1. 한계기업에 관한 연구 11
1) 한계기업으로의 진입 요인 13
2) 한계기업이 산업, 국가에 끼치는 영향 14
3) 한계기업의 정상기업으로의 전환 요인 17
4) 한계기업에 대한 정책자금 지원 효과 18
2. 신용보증에 관한 연구 21
1) 신용보증의 거시적 효과 23
2) 신용보증의 미시적 효과 25
제 3 절 선행연구와의 차별성 27
제 3 장 연구설계 및 분석 방법 28
제 1 절 연구절차 28
제 2 절 연구문제 및 가설 설정 30
1. 연구문제 30
2. 가설 설정 31
제 3 절 연구의 분석틀과 변수의 정의 32
1. 연구의 분석틀 32
2. 변수의 조작적 정의 34
1) 독립변수 34
2) 종속변수 34
3) 통제변수 35
제 4 절 자료수집 및 분석방법 38
1. 자료수집 38
2. 분석방법 38
1) 성향점수매칭(Prospensity Scoring Matching, PSM) 38
2) 이중차이분석(Difference in Difference, DID) 40
3) 로지스틱 회귀분석(Logistic Regression Analysis) 43
제 4 장 실증분석 결과 44
제 1 절 분석대상자료 및 기술통계 44
1. 분석 대상 및 표본 구성 44
2. 기술통계량 45
1) 모집단 분석 45
2) 표본집단 분석 48
제 2 절 성향점수를 이용한 매칭 50
1. 성향점수매칭 방법과 절차 50
2. 매칭 및 매칭의 질 평가 51
제 3 절 보증지원의 재무효과 분석 60
1. 성장성 지표 60
1) 매출액증가율 60
2) 총자산증가율 61
2. 수익성 지표 62
1) 매출액영업이익률 63
2) 총자산영업이익률 64
3. 안정성 지표 65
1) 자기자본비율 65
2) 이자보상비율 66
4. 분석결과 요약 68
제 4 절 정상기업으로의 전환 요인 분석 69
1. 기술통계량 69
2. 로지스틱 회귀분석 74
1) 모형 적합성 평가 74
2) 회귀계수 추정 및 결과 76
3) 오즈비(Odds Ratio) 해석 78
3. 분석결과 요약 81
제 5 장 결론 82
제 1 절 연구결과 요약 82
제 2 절 시사점 84
제 3 절 연구의 한계 및 향후과제 86
참고문헌 88
Abstract 94석
The Impact of the Relocation Policy of Public Institutions due to the Establishment of Innovative Cities on Balanced Regional Development
학위논문(석사) -- 서울대학교 대학원 : 행정대학원 공기업정책학과, 2024. 8. 고길곤.본 연구의 목적은 공공기관 지방이전 정책이 종합적인 지역발전에 미치는 영향을 확인하고 추가 공공기관 이전 및 지역균형발전 정책에 실효성 있는 시사점을 제시하는 데 있다. 그동안 공공기관 지방이전 정책효과를 분석한 선행연구는 대부분 지방이전이 지역경제에 미치는 영향에 대해 다뤄왔다. 본 연구에서는 기존연구에서는 관심이 미흡했던 공공기관 지방이전이 지역의 사회․문화적 측면에 미치는 영향까지 포괄하여 분석하였다. 또한 공공기관 이전이 혁신도시 주변도시에 미치는 영향에 대해서도 관심을 갖고 분석을 실시하였다. 더불어 공공기관 이전규모도 지역발전에 미치는 효과의 크기에 영향을 미칠 수 있다고 보고 이를 분석하였다. 본 연구의 분석대상은 전국 기초자치단체로, 개별 이전기관이 입지한 지자체 9개와 세종특별자치시, 제주특별자치도를 제외한 217개의 시․ 군․구이다. 시간적 범위는 2010년부터 2021년까지 총 12개년도이다. 공공기관 지방이전이 지역발전에 미치는 영향을 분석하기 위해 고정효과 모형의 패널회귀분석을 시행하였다. 종속변수인 지역발전은 지역경제, 사회복지, 교육문화로 분류하여 측정하였고, 독립변수는 연구모형에 따라 공공기관 이전여부와 이전규모로 나누어 분석하였다. 독립변수와 종속변수의 관계를 규명하기 위해 지역발전에 영향을 미칠 수 있는 내․외생적 요인을 통제변수로 포함하여 분석을 시행하였다. 본 연구의 분석결과를 요약하면 다음과 같다. 첫째, 공공기관 지방이전은 이전지역의 지역경제 부문의 지역발전에는 긍정적인 영향을 미친 것으로 나타났다. 그러나 사회복지 부문과 교육문화 부문의 지역발전에는 유의미한 영향을 미치지 못하였다. 둘째, 공공기관 지방이전은 이전지역과 혁신도시 지역생활권의 지역경제에 긍정적인 영향을 미친 것으로 확인되었다. 끝으로, 공공기관 이전규모는 이전지역의 지역경제 부문의 지역발전과 유의미한 영향이 없는 것으로 나타났다. 다만, 병상 수와 의사 수, 문화기반시설 수에서 미미하지만 이전규모와 유의한 정(+)의 효과가 있었다. 본 연구의 의의와 정책적 시사점은 다음과 같다. 첫째, 공공기관 지방 이전 정책으로 인해 지방이전하기 전과 비교하여 혁신도시는 경제적 발전을 일부 달성하기는 하였으나 아직 사회, 복지, 의료, 문화, 교육 등 지역민의 삶의 질을 풍요롭게 하는 사회․문화적 발전 측면에는 도달하지 못한 것으로 나타났다. 2차 공공기관 지방이전 시행시 정주여건 개선을 위해 해당 지자체의 의료, 복지, 교육, 문화 인프라 확대도 동시에 시행하는 정책적 노력이 필요하다. 둘째, 정책 수혜지역으로 혁신도시 지역생활권을 포함하여 분석함으로써 분석대상을 확장하여 공공기관 이전정책의 성장거점 효과를 실증적으로 분석하려는 시도를 하였다는 데 의의가 있다고 판단된다. 공공기관 이전의 효과가 혁신도시만을 대상으로 했을 때보다 작게 나타나 지역성장의 거점효과가 확산되었다고 보기에는 어려 운 만큼, 이를 개선하기 위해 혁신도시와 지역생활권의 긴밀한 교통인프라 구축, 지자체 간 협력적 거버넌스 운영계획 확립 등을 통해 지역 간 연계를 활성화하려는 정책적 노력이 필요하다. 끝으로, 공공기관 지방이 전에서 현재의 규모로는 규모의 경제 효과를 볼 수 없음을 확인하였다는 데에 연구의 의의를 가진다. 추가 이전지 선정시 이전규모에 초점을 맞추기보다는 지역의 혁신거점으로서의 적합성을 기준으로 한 체계적인 정책적 접근이 필요하다.Did the relocation policy of public institutions contribute to balanced regional development in South Korea? Did Innovative Cities become growth hubs for their regions? These are research questions in this study. The purpose of this study is to examine the impact of the relocation policy of public institutions on comprehensive regional development and to provide practical implications for additional relocations and balanced regional development policies, after twelve years the relocation of public institutions began. Previous studies analyzing the effects of relocating public institutions have mostly focused on the impact on the regional economy. This study extends the analysis to include the social and cultural impacts of relocating public institutions, which have been relatively neglected in earlier research. It also examines the effects of public institution relocation on the surrounding cities of the Innovative Cities. Additionally, the study considers the impact of the scale of public institution relocations on regional development. The subjects of this study are all basic local governments across the country, excluding nine local governments where individual institutions are located, Sejong Special Self-Governing City, and Jeju Special Self-Governing Province, resulting in 217 cities, counties, and districts. The time frame spans 12 years from 2010 to 2021. To analyze the impact of public institution relocations on regional development, a fixed-effects model of panel regression analysis was implemented. Regional development, the dependent variable, was measured by categorizing it into regional economy, social welfare, and education/culture. The independent variables were analyzed based on whether public institutions were relocated and the scale of the relocations. To determine the relationship between the independent and dependent variables, endogenous and exogenous factors that could affect regional development were included as control variables. The main findings of this study are as follows: First, the relocation of public institutions positively affected regional economic development in the relocation areas but did not significantly impact social welfare and education/cultural development. Second, the relocation positively influenced the regional economy of both the relocation areas and the Innovative Cities living zones. Lastly, the scale of public institution relocations did not have a significant impact on regional economic development. However, there was a slight positive effect on the number of hospital beds, doctors, and cultural facilities. The implications and policy suggestions derived from the research findings are as follows: First, although Innovative Cities achieved some economic development compared to before the relocation policy, they have not yet reached the level of social and cultural development that enriches the quality of life, such as in social welfare, medical services, culture, and education. Thus, when implementing the second phase of public institution relocation, it is necessary to simultaneously improve local infrastructure in medical, welfare, education, and cultural sectors. Second, by including the living zones of Innovative Cities as the beneficiaries of the policy in the analysis, the study aimed to empirically analyze the growth pole effects of the public institution relocation policy. However, since the effect was smaller than expected, policy efforts are needed to enhance connectivity between regions by building tight transport infrastructure and establishing collaborative governance plans among local governments. Lastly, the study confirms that the current scale of public institution relocations does not yield economies of scale. Therefore, selecting future relocation sites should focus on the suitability of the region as an innovation hub rather than the scale of the relocation.제 1 장 서 론 1
제 1 절 연구의 배경 및 목적 1
제 2 절 연구대상 4
제 3 절 연구방법 6
제 2 장 이론적 배경 및 선행연구 검토 7
제 1 절 지역격차와 지역발전 이론 7
1. 지역의 개념과 지역격차 7
2. 지역개발이론 10
3. 지역균형발전 14
4. 지역생활권 15
제 2 절 공공기관 지방이전의 이론적 논의 17
1. 공공기관 지방이전 추진배경 및 현황 17
2. 공공기관 지방이전 기대효과 22
제 3 절 선행연구 검토 24
1. 지역격차 및 지역발전 관련 연구 24
2. 공공기관 지방이전 관련 연구 26
3. 선행연구와의 차별성 32
제 3 장 연구설계 34
제 1 절 연구모형 및 가설 · 34
1. 연구모형 34
2. 연구가설 36
제 2 절 변수의 조작적 정의 39
1. 종속변수의 측정과 지표 39
2. 독립변수의 측정과 지표 43
3. 통제변수의 측정과 지표 44
제 4 장 실증분석 결과 46
제 1 절 기초통계량 분석 46
1. 전체변수 기초통계량 46
2. 종속변수 기초통계량 51
3. 독립변수 기초통계량 56
4. 통제변수 기초통계량 58
제 2 절 상관관계 분석 59
제 3 절 패널 회귀분석 결과 61
제 5 장 결 론 81
제 1 절 요약 및 연구의 시사점 81
제 2 절 연구의 한계 및 향후과제 85
참고문헌 87
Abstract 91석
Case study on Veridical data science
학위논문(석사) -- 서울대학교 대학원 : 자연과학대학 통계학과, 2024. 8. 원중호.본 논문은 PCS 프레임워크를 소개하고, 대한민국 제22대 국회의원 선거 자료 분석에 적용한 사례 연구를 다룬다. 먼저, PCS 프레임워크의 세 가지 원칙인 예측 가능성, 계산 가능성, 안정성을 소개하고, 기존 예시를 들어 이 세 원칙에 기반한 PCS 접근법에 대해 고찰한다. PCS 프레임워크는 연구자가 다른 연구자들이 투명한 근거를 기반으로 결론의 강도를 평가할 수 있도록 데이터 과학 생애 주기 전반에 걸쳐 이뤄지는 개인의 판단에 따른 결정을 명시해야 하고, 이를 위해 데이터와 분석 과정에 내재 되어 있는 가정을 구조적으로 문서화해야 함을 주장하고 있다. 기존에 발표된 연구 결과들은 제한된 투명성으로 인해 많은 분석의 근거가 모호하여 투명성이 제한되지 않을 때 발생할 수 있는 것보다 많은 오발견(false discovery)이 발생할 수 있다. 본 논문에서는 사례 연구를 통해 현실적인 맥락에서 PCS 프레임워크의 효과와 한계를 평가하고, 이후의 데이터 과학 연구의 제한된 투명성이라는 근본적인 문제를 해결할 계기를 마련한다.This thesis introduces the PCS framework and conducts a case study applying it to the analysis of data from the 22nd National Assembly Election of South Korea. First, the three principles of the PCS framework — predictability, computability, and stability — are introduced, and a review of the PCS approach based on the three principles is provided with examples. The PCS framework argues that researchers should explicitly document decisions based on individual judgment throughout the data science life cycle, so that other researchers can evaluate the strength of conclusions based on transparent evidence. To achieve this, the PCS framework argues that assumptions embedded in the data and the analysis process must be documented in a structured manner. The results of previously published studies often have ambiguous grounds due to limited transparency, leading to more false discoveries than might occur if transparency were not limited. Through the case study, this thesis evaluates the effectiveness and limitations of the PCS framework in a realistic context, providing an opportunity to address the fundamental issue of limited transparency in future data science research.국문초록 i
제 1 장 서론 5
1.1 연구 배경 5
제 2 장 PCS 프레임워크 9
2.1 소개 9
2.2 비판적 사고, 질문의 예시 및 중요성 12
2.3 데이터 과학 생애 주기 14
2.3.1 1 단계: 해당 분야 문제 구체화 및 데이터 수집 14
2.3.2 2 단계: 데이터 정제, 전처리 및 탐색 15
2.3.3 3 단계: 내재된 데이터 구조 탐색(차원 축소 및 클러스터링) 18
2.3.4 4 단계: 예측 및/또는 추론 분석 18
2.3.5 5 단계: 결과 평가 19
2.3.6 6 단계: 결과 전달 및 해당 분야에 대한 지식 갱신 19
제 3 장 사례 연구: 제22대 비례대표 국회의원 선거 21
3.1 배경 21
3.1.1 주제 선정 이유 21
3.1.2 이용한 여론조사 기관 22
3.1.3 전국 단위 여론조사 기간 23
3.1.4 용어 정의 24
3.2 질문 및 문제 정의 24
3.2.1 예측 가능성 관련 질문 24
3.2.2 안정성 관련 질문들 26
3.3 데이터 수집 및 출처 27
3.4 데이터 분석의 파일 구조 28
3.5 데이터 정제 및 전처리 29
3.5.1 데이터 정제 36
3.5.2 데이터 전처리 52
3.6 데이터 분석 60
3.6.1 구체적인 분석 도구 및 소프트웨어 설명 60
3.6.2 분석 과정 60
3.7 데이터 분석 결과 72
제 4 장 결론 74
4.1 연구 의의 및 주요 결과 74
4.2 연구의 한계 및 향후 방향 75
ABSTRACT 81석
신체활동 및 좌식행동의 역할
학위논문(박사) -- 서울대학교 대학원 : 사범대학 체육교육과, 2024. 8. 김연수.흡연으로 인한 암, 심혈관 질환 및 호흡기 질환과 같은 주요 질병의 가장 위험한 단일 위험 요소이다. 흡연이 건강에 미치는 영향에 대한 우려는 흡연자가 금연을 시도하게 만드는 중요한 동기이다. 그러나 니코틴의 중독성 때문에 지속적으로 금연하기가 어렵다. 따라서 흡연이 사망률에 대한 영향을 완화시키는 것에 신체활동과 좌식행동의 효과를 확인하고, 또한, 운동이 더 효과적인지 좌식행동 줄이는 것이 더 효과적인지 보고자 한다.
본 연구는 한국 국민건강영양조사(Korea National Health and Nutrition Examination Survey, KNHANES)의 2014-2015년 자료를 바탕으로 사망원인통계 자료와 연계해서 분석했다.
본 연구는 흡연상태가 사망률과 관계를 확인하고 신체활동 가이드라인 충족 여부와 사망률의 관계를 확인하여 신체활동 가이드라인 충족 여부에 따라 흡연상태와 사망률 사이의 연관성을 확인했다. 또한, 좌식행동과 사망률의 관계를 확인하여 좌식행동 시간에 따라 흡연상태와 사망률 사이의 연관성을 확인했다. 본 연구는 2014-2015년 국민건강영양조사 데이터를 베이스 라인으로 국가 사망 데이터에서 2020년 사망원인 통계 및 연계자료를 연결해서 구축된 8,542명 연구 대상자가 흡연상태에 따라 모든 원인 사망률과 CVD 사망률 다 높아지는 것을 확인했다. 반대로 신체활동 가이드라인 충족 여부에 따라, 좌식시간 하루 8시간 초과 여부에 따라 모든 원인 사망률과 CVD 사망률 다 낮아지는 것으로 나타났다.
본 연구의 결론은 신체활동 및 좌식행동이 흡연과 모든 원인으로 인한 사망률 및 심혈관질환 사망률 사이의 연관성을 완화할 수 있다는 것이 분명하다. 개인의 건강증진을 위해서 금연, 신체활동 실행, 좌식행동 자제를 평행해서 같이 실천하는 것이 이상적이다. 금연도 중요하지만 금연이 너무 어렵다 하면 신체활동 안 하는 것보다 하는 것이 건강에 이득을 가져올 수 있다. 신체활동에 강도나 시간, 장소에 지장이 있으면 좌식행동 줄거나 깨는 것도 건강에 이득을 가져올 수 있다.Ⅰ. 서 론 · 1
1. 연구의 필요성 · 1
2. 연구의 목적 · 6
3. 연구의 가설 · 7
Ⅱ. 이론적 배경 8
1. 흡연 · 8
1) 흡연의 기원과 역사 · 8
2) 흡연과 건강 · 12
3) 한국의 흡연 실태 · 14
4) 흡연의 생물학적 기전 · 15
5) 흡연과 심혈관질환 19
2. 신체활동과 흡연 24
3. 좌식행동과 흡연 29
Ⅲ. 연구방법 33
1. 연구대상 33
2. 자료분석 36
1) 흡연, 신체활동, 좌식행동 36
2) 사망원인 확인 37
3) 사회인구학적 및 건강 관련 변수 · 37
3. 통계분석 38
Ⅳ. 연구 결과 · 40
1. 일반적인 특성 40
2. 흡연 및 신체활동과 사망률 42
1) 흡연과 사망률 42
2) 신체활동과 사망률 43
3) 좌식행동과 사망률 · 45
3. 흡연, 신체활동 및 좌식행동이 사망률에 주는 교차영향
47
1) 흡연과 신체활동이 사망률에 주는 교차영향 47
2) 흡연과 좌식행동이 사망률에 주는 교차영향 56
Ⅴ. 논의 · 58
Ⅵ. 참고문헌 64박
First Record of Two Subgenera Ctenonomia and Pyghalictus of Lasioglossum (Hymenoptera: Halictidae) from South Korea
꼬마꽃벌과의 2종, Lasioglossum (Ctenonomia) kumejimense (Matsumura and Uchida, 1926) and Lasioglossum (Pyghalictus) politum pekingense Blüthgen, 1925이 한국에서 처음 확인되었다. 이 종의 암컷의 진단 특징과 분포, 형태적 형질 도해, 한국산 줄꼬마꽃벌속의 아속에 대한 분류키를 수록한다.N