Journal of Geoscience, Engineering, Environment, and Technology
Not a member yet
306 research outputs found
Sort by
Geological Structure Analysis to Determine the Direction of the Main Stress at Western Part of Kolok Mudik, Barangin District, Sawahlunto, West Sumatera
Get PDFOn the study area there are three types of structure, those are fault, fold and joint. Types of fault were found in the study area, reverse fault with the strike/dip is N215oE/75o, normal fault has a fault directions N22oE and N200oE with pitch 35o, and dextral fault with pitch 10o and strike N219oE. Fold and joint structures used to determine the direction of the main stress on the study area. Further, an analysis used stereonet for data folds and joints. So that from the data got three directions of main stress, those are Northeast – Southwest (T1), North – South (T2) and Southeast – Northwest (T3). On the Northeast – Southwest (T1) stress there are four geological structures, anticline fold at ST.3 , syncline folds at ST. 13a, ST. 13b, ST. 13c and ST. 33, chevron fold at ST. 44 and joint at ST. 2. On the North – South (T2) stress there are three geological structures, those are syncline fold at ST. 35, anticline fold at ST. 54 and joints at ST. 41, ST. 46 and ST. 47. On the Southeast – Northwest (T3) stress were also three geological structures, those are chevron fold at ST 42a, overturned fold at ST. 42b, syncline fold at ST. 42c and joints at ST. 5 and ST. 34
Acoustic systems (split beam echo sounder ) to determine abundance of fish in marine fisheries: Review
Get PDFAcoustic waves are transmitted into the subsurface ocean will experience scattering (scattering) caused by marine organisms, material distributed in the ocean, the structure is not homogeneous in seawater, as well as reflections from the surface and the seabed. Estimation of fish stocks in the waters wide as in Indonesia have a lot of them are using the acoustic method. The acoustic method has high speed in predicting the size of fish stocks so as to allow acquiring data in real time, accurate and high speed so as to contribute fairly high for the provision of data and information of fishery resources. Split beam echo sounder comprises two aspects, and a transducer. The first aspect is the high-resolution color display for displaying echogram at some observations and also serves as a controller in the operation of the echo sounder. The second aspect is transceiver consisting of transmitter and receiver. The Echosounder divided beam first inserted into the ES 3800 by SIMRAD beginning of the 1980s and in 1985 was introduced to fishermen in Japan as a tool for catching up. Split beam transducer is divided into four quadrants. Factors that contribute affect the value of Target Strength (TS) fish Strength target can generally be influenced by three factors: a target factor itself, environmental factors, and factors acoustic instrument. Factors include the size of the target, the anatomy of fish, swim bladder, the behavior of orientation
Characterization of Coal Quality Based On Ash Content From M2 Coal-Seam Group, Muara Enim Formation, South Sumatra Basin
Get PDFMuara Enim Formation is well known as coal-bearing formation in South Sumatra Basin. As coal-bearing formation, this formation was subjects of many integrated study. Muara Enim Formation can be divided into four coal-seam group, M1, M2, M3, and M4. The M2 group comprising of Petai (C), Suban (B), Lower Mangus (A2), and Upper Mangus (A1). Depositional environments of Group M2 is transitional lower delta plain with sub-depositional are crevasse splay and distributary channel. The differentiation of both sub-depositional environments can be caused the quality of coal deposit. One of quality aspects is ash content. This research conducted hopefully can give better understanding of relationship between depositional environments to ash content. Group M2 on research area were found only Seam C, Seam B, and Seam A2, that has distribution from north to central so long as 1400 m. Coal-seam thickness C ranged between 3.25-9.25 m, Seam B range 7.54-13.43 m, and Seam C range 1.53-8.37 m, where all of coal-seams thickening on the central part and thinning-splitting to northern part and southern part. The ash content is formed from burning coal residue material. Ash contents on coal seam caused by organic and inorganic compound which resulted from mixing modified material on surrounded when transportation, sedimentation, and coalification process. There are 27 sample, consists of 9 sample from Seam C, 8 sample from Seam B, and 10 sample from Seam A2. Space grid of sampling is 100-150 m. Ash content influenced by many factors, but in research area, main factor is existence of inorganic parting. Average ash content of Seam C is 6,04%, Seam B is 5,05%, and Seam A2 is 3,8%. Low ash content influenced by settle environment with minor detrital material. High ash content caused by oxidation and erosional process when coalification process. Ash content on coal in research area originated from detritus material carried by channel system into brackish area or originated from higher plant in brackish area. The high ash content also can be caused by after the coal deposited. It had originated from overburden horizon which infill in cleat of coal seam
Geology Structure Identification Using Pre-Stack Depth Migration (PSDM) Method of Tomography Result in North West Java Basin
Get PDFNorth West Java Basin is a tertiary sedimentary basin which is located in the right of the western part of the Java island. North West Java Basin is geodynamic where currently located at the rear position of the path of the volcanic arc of Java that is the result of the India-Australia plate subduction to the south towards the Eurasian plate (Explanation of Sunda) in the north. Geology structure observation is difficult to be conducted at Quaternary volcanicfield due to the classical problem at tropical region. In the study interpretation of fault structures can be done on a cross-section of Pre-Stack Depth Migration (PSDM) used prayer namely Hardware Key Device, ie Central Processing Unit: RedHat Enterprise Linux AS 5.0, prayer Monitor 24-inch pieces, Server: SGI altix 450/SuSe Linux Enterprise Server 9.0, 32 GB, 32 X 2,6 GHz Procesor, network: Gigabyte 1 Gb/s, and the software used is paradigm, product: Seismic Processing and Imaging. The third fault obtained in this study in accordance with the geological information derived from previous research conducted by geologists. The second general direction is northwest-southeast direction represented by Baribis fault, fault-fault in the Valley Cimandiri and Gunung Walat. This direction is often known as the directions Meratus (Meratus Trend). Meratus directions interpreted as directions that follow the pattern of continuous arc Cretaceous age to Meratus in Kalimantan
Urban Green Space Development Strategy–Reconverting Gas Station To Public Parks In The City Of Surabaya, Indonesia
Get PDFUrban Green Space Development has become a challenging task for city governments especially in Indonesia, due to high prices of land around urban centers. On the other hand, there are inconsistencies between land use and land allocation within the city planning. In Surabaya City, quite a lot of gas stations were built on areas which are originally intended for green open spaces. Surabaya City Municipality is strongly committed to reconvert Gas Station Areas to green open spaces as determined in the plan. Innovative strategies have enabled the city government to reconvert 13 gas stations to public parks. This paper analyzes the implementation process of the Urban Green Space Reconversion Policy, describing the historical details of the issues, the taking over of land from gas station owners, and the park development and campaigning. Discussion also includes the most influential factors in this success story
Slope Stability Analysis Based on Type, Physical And Mechanical Properties Rock in Teluk Pandan District, East Kutai Regency, East Kalimantan
Get PDFResearch was located In Teluk Pandan District, East Kutai Regency, East Kalimantan Province. It’s aimed to determine the lithology in the research area and to find out how the amount of slope that will be a landslide at that location.
The research conducted with the analysis of coring drilling results and then analyzed in the laboratory of rock mechanics to get the characteristic of physical and mechanical properties of the rocks. The data analysis using Hoek and Bray Method.
The results showed that in the area study has a sedimentary rock lithology fine to medium detritus, such as claystone, siltstone and sandstone, as well as inserts are coal and shale. Based on the results of laboratory analysis of rock mechanics obtained density between 2,648 to 2,770. While the test results obtained value triaxial cohesion between (6.66 - 9:05) Kg / cm2, friction angle in between (37.19 - 44.08)o, cohesion residual (2.72 - 3.10) Kg / cm2, residual friction angle (27.22 - 32.44)o. While the direct shear test the cohesion of the summit between (6.66 - 9:05) Kg / cm2, friction angle in the cohesion peak (36.15 - 43.00)o, cohesion residual (2:22 to 3:10) Kg / cm2, friction angle in the cohesion residual (37.22 - 33.85)o. The simulation results stability of the slope stability Hoek and Bray using rockslide software, the result is that if the slope with a single slope stability, the stability of the slope is 60o, and if the slope with the stability of the slope overall stability of the slope is 48o
Effectiveness of the National Program for Community Empowerment (PNPM) for Infrastructure Development Accelerated and Geoplanology in District of Marpoyan Damai, Pekanbaru
Get PDFSince 2007 PNPM Urban realize that poverty is a structural problem and multi-dimensional. In PNPM Urban perspective , the complexity of the various dimensions of poverty -related social , political , economic , and asset . this research aim is to know the Effectiveness of the National Program for Community Empowerment for Infrastructure Development Accelerated. In this research , the authors use an explanatory survey research methods . Selected number of samples in the analysis of the effectiveness of PNPM Urban infrastructure improvements are stakeholders involved in PNPM Urban population in the research area of all stakeholders involved in PNPM Urban in District Marpoyan Damai , the authors take purposively respondents who meet the criteria and are associated with research.
The results showed that increasing road infrastructure with the PNPM Mandiri. The average improvement of road infrastructure after the PNPM Urban amounted to 35.8 %. The average increase in the quality of infrastructure before the PNPM Urban program is only at 4.4 % per year . This indication shows that roads infrastructure and the quality of the road surface to be increased significantly in the presence of the PNPM Urban Marpoyan Damai in the District . From interviews with relevant stakeholders PNPM Urban, respondents said PNPM Urban was very effective against the improvement of infrastructure in District Marpoyan Damai . Respondents argue that any proposed activity in infrastructure always realized by PNPM Urban .
Geological condition of study consists of alluvium Sand, Gravel, Clay, Peat Swamp, Plant Remain in Quaternary age. There are two anticline in this area that is part Western and Southern and fault inferred direction Northwest-Southeast in the middle area of research so that the topography of the area of research a bit wavy and faulted that need observation on land-use planning such as drainage, airport, residential and availability of clean water.
Sea Surface Temperature and Wind Velocity in Batam Waters Its Relation to Indian Ocean Dipole (IOD)
Get PDFThis study aimed to observe the characteristics of sea surface temperature (SST) and wind velocity and its relation with the Indian Ocean Dipole (IOD) in the waters of Batam. The data used in this study were the SST datasets and the wind speed of 2016 in the waters of Batam. The method used in this research were the visual analysis using the data ocean view (ODV) to observe at the spatial and temporal distribution of the SST and the wind speed in Batam waters at different seasons. The next method is a fast Fourier transform (FFT). The earlier monsoon season that occurred in April has the highest wind speed with the value of 3.9 MS ** - 1 for components U. As for the V, the component has the highest value of -3.6 MS ** - 1. The SST Batam observed high in April occurred on 19-04-2016 with a value of 304.2 ° K (31.05 ° C). West monsoon winds that occurred in January has the highest wind speed with a value of 4.5 MS ** - 1 for components U. As for the V, the component has the highest value of 5.2 MS ** - 1 in the waters of Batam. The highest SST in Batam was occurred in January on 19-01-2016 with a value of 302.8 ° K (29.65 ° C). Based on the results of the FFT, wind speed and SST in the waters of the Island has a dominant 6-month period (semiannual)
Metamorphic rock-hosted orogenic gold deposit style at Bombana (Southeast Sulawesi) and Buru Island (Maluku): Their key features and significances for gold exploration in Eastern Indonesia
Get PDFIn Indonesia, gold is commonly mined from epithermal-, porphyry-, and skarn-type deposits that are commonly found in volcanic belts along island arcs or active continental margin settings. Numerous gold prospects, however, were recently discovered in association with metamorphic rocks. This paper focuses on metamorphic rock-hosted gold mineralization in Eastern Indonesia, in particular the Bombana (SE Sulawesi) and Buru Island (Maluku) prospects. At Bombana, gold-bearing quartz-veins are hosted by the Pompangeo metamorphic complex. Sheared, segmented veins vary in thickness from 2 cm to 2 m. Gold is mainly present in the form of ‘free gold’ among silicate minerals and closely related to cinnabar, stibnite, tripuhyite, and in places, minor arsenopyrite. The gold distribution is erratic, however, ranging from below detection limit up to 134 g/t. At least three generations of veins are identified. The first is parallel to the foliation, the second crosscuts the first generation of veins as well as the foliation, and the late-stage laminated deformed quartz-calcite vein represents the third mineralization stage. The early veins are mostly massive to crystalline, occasionally brecciated, and sigmoidal, whereas the second-stage veins are narrower than the first ones and less subjected to brecciation. Gold grades in the second- and third-stage veins are on average higher than that in the earlier veins. Microthermometric and Raman spectrometric studies of fluid inclusions indicate abundant H2O-NaCl and minor H2O-NaCl-CO2 fluids. Homogenization temperatures and salinities vary from 114 to 283 ºC and 0.35 to 9.08 wt.% NaCl eq., respectively. Crush-leach analysis of fluid inclusions suggests that the halogen fluid chemistry is not identical to sea water, magmatic or epithermal related fluids, but tends to be similar to fluids in mesothermal-type gold deposits. In Buru Island (Gunung Botak and Gogorea prospects), two distinct generations of quartz veins are identified. Early quartz veins are segmented, sigmoidal discontinuous and parallel to the foliation of the host rock. This generation of quartz veins is characterized by crystalline relatively clear quartz, and weakly mineralized with low sulfide and gold contents. The second type of quartz veins occurs within the ‘mineralized zone’ of about 100 m in width and ~1,000 m in length. Gold mineralization is intensely overprinted by argillic alteration. The mineralization-alteration zone is probably parallel to the mica schist foliation and strongly controlled by N-S or NE-SW-trending structures. Gold-bearing quartz veins are characterized by banded texture particularly following host rock foliation and sulphide banding, brecciated and rare bladed-like texture. Alteration types consist of propylitic (chlorite, calcite, sericite), argillic and carbonation represented by graphite banding and carbon flakes. Ore mineral comprises pyrite, native gold, pyrrhotite, and arsenopyrite. Cinnabar and stibnite are present in association with gold. Ore chemistry indicates that 11 out of 15 samples yielded more than 1 g/t Au, in which 6 of them graded in excess of 3 g/t Au. All high-grade samples are composed of limonite or partly contain limonitic material. This suggests the process of supergene enrichment. Interestingly, most of the high-grade samples contain also high concentrations of As (up to 991ppm), Sb (up to 885ppm), and Hg (up to 75ppm). Fluid inclusions in both quartz vein types consist of 4 phases including L-rich, V-rich, L-V-rich and L1-L2-V (CO2)-rich phases. The mineralizing hydrothermal fluid typically is CO2-rich, of moderate temperature (300-400 ºC), and low salinity (0.36 to 0.54 wt.% NaCl eq). Based on those key features, gold mineralization in Bombana and Buru Island tends to meet the characteristics of orogenic, mesothermal types of gold deposit. Metamorphic rock-hosted gold deposits could represent the new targets for gold exploration particularly in Eastern Indonesia