155155 research outputs found
Sort by
Ibuprofen delays ovulation by several hours: prospective controlled study in natural cycles with HCG-triggered ovulation.
Get PDFRESEARCH QUESTION
Does ibuprofen, a non-steroidal anti-inflammatory drug (NSAID), delay ovulation?
DESIGN
Two-stage, proof-of-concept, controlled study, assessing the percentage of non-ovulated follicles 42 h after HCG injection in patients taking ibuprofen. The intervention group consisted of women undergoing natural cycle IVF treatment taking ibuprofen 3 × 400 mg per day. The control group consisted of women undergoing timed sexual intercourse or intrauterine insemination. The proportion of patients with non-ovulated follicles in the ibuprofen group was first compared against a reference of 50% using a one-sample binomial test, and second against the proportion observed in the control group using an adjusted logistic regression.
RESULTS
A total of 26 women were recruited in the ibuprofen intervention group. Twenty-five patients were recruited in the control group. The proportion of patients with delayed ovulation observed (22/26 [84.6%]; 95% CI 65.1% to 95.6%) was significantly higher than the reference of 50% (P < 0.001). In the control group, the proportion of patients with delayed ovulation was 20.0% ([5/25], 95% CI 6.8% to 40.7%). Compared with the ibuprofen group, a significantly increased probability of a delayed ovulation was found in the ibuprofen intervention group (adjusted OR 22.72, 95% CI 5.77 to 115; P < 0.001). Of the 22 women with delayed ovulation, oocytes were retrieved in 20 women (90.9%) and all oocytes were mature (metaphase II).
CONCLUSIONS
Women trying to conceive should avoid non-selective NSAIDs around the time of ovulation. Ibuprofen or other NSAID can be used to delay ovulation for several hours in assisted reproductive technology and other infertility treatments if required
Wer zum Schwert greift. Über die vier kleinen Männer am Berner Gerechtigkeitsbrunnen
No full textDieser Beitrag präsentiert eine neue Perspektive auf den Berner Gerechtigkeitsbrunnen, indem er die Dynamik zwischen den dargestellten Figuren aufzeigt. Er beschreibt die visuelle Abgrenzung von Kaiser und König auf der einen Seite der Gerechtigkeit und ihrer Waagschalen zu Sultan und Papst auf der anderen. Diese Aufteilung wird mithilfe zeitgenössischer Schriften gegen den Papst und die sog. "Türkengefahr" im politischen Diskurs Berns im frühen 16. Jahrhundert verortet
Accuracy and time efficiency of conventional and digital outlining of extensions of denture foundation on preliminary casts.
Get PDFPURPOSE
The purpose of this diagnostic study was to assess the accuracy and time efficiency of a digital method to draw the denture foundation extension outline on preliminary casts compared with the conventional technique.
MATERIALS AND METHODS
A total of 28 preliminary edentulous casts with no anatomical landmarks were digitized using a laboratory scanner. The outlining of the entire basal seat of the denture was performed on preliminary casts and digitized. Casts with no extension outline were digitized and outlines were drawn using software (DWOS, Straumann). The accuracy of the extension outlined between both techniques was evaluated in the software (GOM Inspect; GOM GmbH) by file superimposition. Specificity and sensitivity tests were applied to measure accuracy. The paired t-test (95% CI) was used to compare the mean total area and the working time.
RESULTS
The accuracy ranged from 0.57 to 0.92. The buccal and labial frenulum showed a lower value in the maxilla (0.57); while the area between the retromolar pad and buccal frenulum (0.64) showed a lower score in the mandible. The maxillary denture foundation and the working time for both arches were significantly longer for the digital method (P < .001).
CONCLUSION
The denture foundation extension outline exhibited a sufficiently excellent accuracy for the digital method, except for the maxillary anterior region. However, the digital method required a longer working time
A roadmap for clinical trials in MASH-related compensated cirrhosis.
No full textAlthough metabolic dysfunction-associated steatohepatitis (MASH) is rapidly becoming a leading cause of cirrhosis worldwide, therapeutic options are limited and the number of clinical trials in MASH-related compensated cirrhosis is low as compared to those conducted in earlier disease stages. Moreover, designing clinical trials in MASH cirrhosis presents a series of challenges regarding the understanding and conceptualization of the natural history, regulatory considerations, inclusion criteria, recruitment, end points and trial duration, among others. The first international workshop on the state of the art and future direction of clinical trials in MASH-related compensated cirrhosis was held in April 2023 at Vall d'Hebron University Hospital in Barcelona (Spain) and was attended by a group of international experts on clinical trials from academia, regulatory agencies and industry, encompassing expertise in MASH, cirrhosis, portal hypertension, and regulatory affairs. The presented Roadmap summarizes important content of the workshop on current status, regulatory requirements and end points in MASH-related compensated cirrhosis clinical trials, exploring alternative study designs and highlighting the challenges that should be considered for upcoming studies on MASH cirrhosis
An anatomical study of the subarachnoid space surrounding the trigeminal ganglion in horses—in preparation for a controlled glycerol rhizotomy in equids
Get PDF
Trueness of the apical and middle root portion segments of 3D-printed removable die and alveolar cast designs manufactured using stereolithographic 3D printing.
Get PDFPURPOSE
The present study evaluated the effects of the root portion design, segment (middle vs. apical), and part (die vs. cast) on the trueness of three-dimensional (3D)-printed removable die-cast complex.
MATERIAL AND METHODS
The trueness of apical and middle segments of the root portion of 45 3D-printed removable dies and casts with three different root portion designs (n = 15) was assessed using a metrology-grade computer program. The three removable dies and cast designs (root form [RF], conical [CON], and cylindric [CYL]) were created using professional computer-aided manufacturing computer programs (DentalCAD 3.1 Rijeka, and InLab CAD 22.0), and manufactured using stereolithographic 3D printer (Form3; FormLabs, Somerville, MA). Subsequently, the 3D-printed removable dies and casts were scanned by a single operator with an intraoral scanner (PrimeScan; Dentsply Sirona, Charlotte, NC), and their respective standard tessellation language files were aligned and compared to master reference files in a metrology-grade computer program (Geomagic Control X; 3D systems, Rock Hill, NC). The root mean square (RMS) values of the middle and apical segments for each removable die and cast were calculated and analyzed using a mixed model including a repeated measure 3-way analysis of variance (ANOVA) and post-hoc stepdown Bonferroni-corrected pairwise comparisons (α = 0.05).
RESULTS
A statistically significant 3-way interaction between factors was detected, suggesting that the part (removable die or alveolar cast) and their design affected the RMS values of their apical and middle root portion segment. (p = 0.045). The post-hoc analysis identified significant differences between RMS values of the apical segments of the CON and CYL removable dies (p = 0.005). Significant differences were observed between the middle and apical segments of the CON (p 0.05). Significant differences were detected between the apical and middle segments of the same alveolar cast design (p < 0.05).
CONCLUSIONS
For the manufacturing trinomial and 3D printing strategy used in the present study, the interaction of the part, design, and segment affected the trueness of removable dies and alveolar casts. The trueness was higher on the middle segment on removable dies and alveolar casts in all designs used, except for CYL removable dies, where the trueness difference between segments was small. Higher trueness values may be achieved with designs with simple apical segment geometries
Trans‑anal minimally invasive surgery (TAMIS) versus rigid platforms for local excision of early rectal cancer: a systematic review and meta-analysis of the literature.
Get PDFBACKGROUND
Available platforms for local excision (LE) of early rectal cancer are rigid or flexible [trans‑anal minimally invasive surgery (TAMIS)]. We systematically searched the literature to compare outcomes between platforms.
METHODS
PRISMA-compliant search of PubMed and Scopus databases until September 2022 was undertaken in this random-effect meta-analysis. Statistical heterogeneity was assessed using I2 statistic. Studies comparing TAMIS versus rigid platforms for LE for early rectal cancer were included. Main outcome measures were intraoperative and short-term postoperative outcomes and specimen quality.
RESULTS
7 studies were published between 2015 and 2022, including 931 patients (423 females); 402 underwent TAMIS and 529 underwent LE with rigid platforms. Techniques were similar for operative time (WMD 11.1, 95%CI - 2.6 to 25, p = 0.11), percentage of defect closure (OR 0.7, 95%CI 0.06-8.22, p = 0.78), and peritoneal violation (OR 0.41, 95%CI 0.12-1.43, p = 0.16). Rigid platforms had higher rates of short-term complications (19.1% vs 14.2, OR 1.6, 95%CI 1.07-2.4, p = 0.02), although no significant differences were seen for major complications (OR 1.41, 95%CI 0.61-3.23, p = 0.41). Patients in the rigid platforms group were 3-times more likely to be re-admitted within 30 days compared to the TAMIS group (OR 3.1, 95%CI 1.07-9.4, p = 0.03). Rates of positive resection margins (rigid platforms: 7.6% vs TAMIS: 9.34%, OR 0.81, 95%CI 0.42-1.55, p = 0.53) and specimen fragmentation (rigid platforms: 3.3% vs TAMIS: 4.4%, OR 0.74, 95%CI 0.33-1.64, p = 0.46) were similar between the groups. Salvage surgery was required in 5.5% of rigid platform patients and 6.2% of TAMIS patients (OR 0.8, 95%CI 0.4-1.8, p = 0.7).
CONCLUSION
TAMIS or rigid platforms for LE seem to have similar operative outcomes and specimen quality. The TAMIS group demonstrated lower readmission and overall complication rates but did not significantly differ for major complications. The choice of platform should be based on availability, cost, and surgeon's preference
Polarization and health-related behaviours and outcomes during the COVID-19 pandemic: a systematic review protocol.
Get PDFINTRODUCTION
The COVID-19 pandemic affected people's health behaviours and health outcomes. Political or affective polarization could be associated with health behaviours such as mask-wearing or vaccine uptake and with health outcomes, e.g., infection or mortality rate. Political polarization relates to divergence or spread of ideological beliefs and affective polarization is about dislike between people of different political groups, such as ideologies or parties. The objectives of this study are to investigate and synthesize evidence about associations between both forms of polarization and COVID-19 health behaviours and outcomes.
METHODS
In this systematic review, we will include quantitative studies that assess the relationship between political or affective polarization and COVID-19-related behaviours and outcomes, including adherence to mask mandates, vaccine uptake, infection and mortality rate. We will use a predetermined strategy to search EMBASE, Medline (Ovid), Cochrane Library, Cochrane COVID-19 Study Register, Global Health (Ovid), PsycInfo (Ovid), Web of Science, CINAHL, EconLit (EBSCOhost), WHO COVID-19 Database, iSearch COVID-19 Portfolio (NIH) and Google Scholar from 2019 to September 8 2023. One reviewer will screen unique records according to eligibility criteria. A second reviewer will verify the selection. Data extraction, using pre-piloted electronic forms, will follow a similar process. The risk of bias of the included studies will be assessed using the JBI checklist for analytical cross sectional studies. We will summarise the included studies descriptively and examine the heterogeneity between studies. Quantitative data pooling might not be feasible due to variations in measurement methods used to evaluate exposure, affective and political polarization. If there are enough relevant studies for statistical data synthesis, we will conduct a meta-analysis.
DISCUSSION
This review will help to better understand the concept of polarization in the context of the COVID-19 pandemic and might inform decision making for future pandemics.
PROTOCOL REGISTRATION
PROSPERO ID: CRD42023475828
Data sources:
BORIS Portal Bern Open Repository and I...BAF-Online: Proceedings of the Berner Al...HASBonline – Hefte zur Archäologie des M...Informationswissenschaft: Theorie, Metho...Jahrbuch Diakonie SchweizJournal of Eye Movement ResearchJournal of Radiation Oncology Informatic...BOP SerialsVersants. Revista suiza de literaturas r...BORIS ThesesAccess Repository Dashboard
Do you manage Bern Open Repository and Information System (BORIS)? Access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard!