155155 research outputs found
Sort by
Is electrical cardioversion independently associated with infarcts on brain magnetic resonance imaging or clinical outcomes in patients with atrial fibrillation?
No full textBACKGROUND
Electrical cardioversion (ECV) is frequently performed in symptomatic atrial fibrillation.
OBJECTIVE
This study aimed to assess the association of ECV with infarcts on brain magnetic resonance imaging (bMRI) and clinical outcomes.
METHODS
The Swiss Atrial Fibrillation Cohort Study included 2386 patients; 1731 patients were evaluated by bMRI. ECVs were recorded by questionnaire. Patients were assigned to categories by number of ECVs performed before enrollment (0, 1, ≥2). A bMRI study was conducted at baseline and after 2 years (n = 1227) and analyzed for large noncortical or cortical infarcts and small noncortical infarcts. Clinical outcomes were recorded during follow-up. Associations of ECV and outcome measures were assessed by multivariate analyses.
RESULTS
There was no independent association between the number of ECVs and infarct prevalence (large noncortical or cortical infarcts and small noncortical infarcts) on baseline bMRI (ECV 1 vs 0: odds ratio [OR], 0.95 [95% CI, 0.68-1.24]; ECV ≥2 vs 0: OR, 1.04 [0.72-1.44]) or between ECVs performed during follow-up and new infarcts on bMRI at 2 years (OR, 1.46 [0.54-3.31]). ECVs were not associated with overt stroke or transient ischemic attack (ECV 1 vs 0: hazard ratio [HR], 1.36 [0.88-2.10]; ECV ≥2 vs 0: HR, 1.53 [0.94-2.48]), hospitalization for heart failure (ECV 1 vs 0: HR, 1.06 [0.82-1.37]; ECV ≥2 vs 0: HR, 1.03 [0.77-1.38]), or death (ECV 1 vs 0: HR, 0.90 [0.70-1.15]; ECV ≥2 vs 0: HR, 0.91 [0.69-1.20]).
CONCLUSION
There was no association between ECV performed before enrollment and cerebral infarcts on baseline bMRI or between ECV performed during follow-up and new infarcts at 2 years. Moreover, ECV was not associated with clinical events
Survey based assessment of the quality of reporting guidelines of carotid artery stenosis.
No full textBACKGROUND
No evaluation of the quality of different carotid guidelines using validated scales has been performed to date. The present study aims to analyze three carotid stenosis guidelines, apprizing their quality and reporting using validated tools.
METHODS
A survey-based assessment of the quality of the European Society for Vascular Surgery (ESVS) 2023, European Stroke Organisation (ESO) 2021, and the Society for Vascular Surgery (SVS) 2021 carotid stenosis guidelines, was performed by 43 vascular surgeons, cardiologists, neurologist or interventional radiologists using two validated appraisal tools for quality and reporting guidelines, the AGREE II instrument and the RIGHT statement.
RESULTS
Using the AGREE II tool, the ESVS, SVS, and ESO guidelines had overall quality scores of 87.3%, 79.4%, and 82.9%, respectively (p=0.001) The ESVS and ESO had better scores in the scope and purpose domain, and the SVS in the clarity of presentation domain. In the RIGHT statement, the ESVS, SVS, and ESO guidelines had overall quality scores of 84.0.7%, 74.3%, and 79.0%, respectively (p=0.001). All three guidelines stood out for their methodology for search of evidence and formulating evidence-based recommendations. On the contrary, were negatively evaluated mostly in the cost and resource implications in formulating the recommendations.
CONCLUSION
The 2023 ESVS carotid stenosis guideline was the best evaluated among the three guidelines, with scores over 5% higher than the other two guidelines. Efforts should be made by guideline writing committees to take the AGREE II and RIGHT statements into account in the development of future guidelines to produce high-quality recommendations
Flexural strength, surface roughness, and biofilm formation of ceramic-reinforced PEEK: An in vitro comparative study.
No full textPURPOSE
This in vitro study aimed to compare flexural strength, surface roughness, and biofilm formation of ceramic-reinforced PEEK with conventionally heat-compressed and milled polymethylmethacrylate (PMMA) denture base materials.
METHODS
Thirty strips (6.4×10×3 mm) and 30 discs (10×1 mm) were fabricated from a heat-compressed PMMA, milled PMMA, and ceramic-reinforced PEEK, 10 each. One surface of each sample was polished to mimic the laboratory procedure for denture base materials. Strips were then subjected to a 3-point bend test using a universal testing machine at a crosshead speed of 5.0 mm/min. An optical profilometer was used to assess the Ra value (mm) of the discs on polished and unpolished sides. Biofilm formation behavior was analyzed by measuring the colony-forming unit (CFU)/ml of Candida albicans on the unpolished surface of the discs. One-way ANOVA followed by Tukey multiple comparison tests were used to compare the flexural strength, Ra value, and biofilm formation of the studied materials (a = 0.05).
RESULTS
Ceramic-reinforced PEEK showed significantly higher flexural strength (178.2 ±3.2 MPa) than milled PMMA (89.6 ±0.8 MPa; P<0.001) and heat-compressed PMMA (67.3 ±5.3 MPa; P<0.001). Ceramic-reinforced PEEK exhibited a significantly higher Ra value than the other groups on unpolished sides; however, the polishing process significantly reduced the Ra values of all studied groups (P<0.05). There was no significant difference in Candida albicans adhesion among the groups (P<0.05).
CONCLUSION
The flexural strength of tested materials was within acceptable limits for clinical use as a denture base material. Ceramic-reinforced PEEK had the highest surface roughness; however, its similarity in biofilm formation to other groups indicates its clinical acceptability as denture base material. This article is protected by copyright. All rights reserved
Pseudomeningocele mimicking sciatica.
No full textWe report on an elderly woman with sciatica due to disc herniation, experiencing complete pain resolution following surgery. Four weeks later, she developed refractory, excruciating pain with foot palsy, prompting a lumbar MRI that revealed no recurrent disc herniation. Upon exploration, intermittent nerve entrapment through the dural tear and pseudomeningocele was identified. Following dural repair and nerve repositioning, the postoperative course and long-term outcome were uneventful. In contrast to recurrent disc herniation, sciatica resulting from nerve entrapment by a pseudomeningocele is exceedingly rare. Its differential diagnosis is crucial in cases with seemingly unspectacular MRI findings, as paralysis can occur in symptomatic patients. The radiological presence of a postoperative pseudomeningocele could be overlooked, and the cause of sciatica might become apparent solely during surgical exploration
Post hoc analysis of the SuperB and Zilverpass trials for treatment of long and complex superficial femoral artery lesions.
No full textOBJECTIVE
In two randomized controlled trials, the outcomes of endovascular treatment of complex femoropopliteal arterial lesions were compared with bypass surgery and considered a valid alternative treatment. The aim of this study was to compare both endovascular treatment options with the hypothesis that implantation of heparin-bonded self-expanding covered stents (Viabahn, SECS) or drug-eluting stents (ZilverPTX, DES) are related to similar clinical outcomes at one-year follow-up.
METHODS
In a post-hoc analysis, the SuperB trial and Zilverpass databases were merged. Patients in the endovascular treatment arms were included and data was analyzed in an intention-to-treat (ITT) and a per-protocol (PP) fashion. Data included baseline and lesion characteristics, procedural details, and follow-up data. The primary endpoint of this study was primary patency at one-year follow-up. The secondary endpoints were secondary patency, target lesion revascularization (TLR), limb loss, and all-cause mortality.
RESULTS
A total of 176 patients were included; 63 in the SECS arm and 113 in the DES arm. Through 1-year follow-up there were no significant differences in primary patency (ITT 63.4% vs 71.1%: p=0.183 and PP 60.8% vs 71.1%; p=0.100). Secondary patency rates were not significantly different in the ITT analysis (86.5% vs 95.1%; p=0.054), but in the PP analysis, there was a significant difference in favor of the DES group (SECS 85.6% versus DES 95.1%; p=0.038). There was no significant difference in freedom from TLR between groups (79.6% vs 77.0%, p=0.481). No major amputations were performed in the SECS group and two in the DES group (1.8%). Survival rate was 98.2% in the SECS group, and 91.3% in the DES group after one-year follow-up (p=0.106). Based on diagnosis (IC versus CLTI) no differences between IC and CLTI patients were observed in primary, secondary patency and freedom from TLR.
CONCLUSIONS
Treatment of complex femoropopliteal arterial disease with the heparin-bonded Viabahn endoprosthesis and the Zilver PTX drug-eluting stent are related to similar primary and secondary patency, and TLR rates at one-year, except for secondary patency in the PP analysis. This study further supports the endovascular treatment of long complex lesions in the femoropopliteal artery
The European Academy of Neurology NeuroCOVID-19 Task Force: A lesson for the future.
Full text linkBACKGROUND
The COVID-19 pandemic has made its mark on world history forever causing millions of deaths, and straining health systems, economies, and societies worldwide. The European Academy of Neurology (EAN) reacted promptly. A special NeuroCOVID-19 Task Force was set up at the beginning of the pandemic to promote knowledge, research, international collaborations, and raise awareness about the prevention and treatment of COVID-19-related neurological issues.
METHODS
Activities carried out during and after the pandemic by the EAN NeuroCOVID-19 Task Force are described. The main aim was to review all these initiatives in detail as an overarching lesson from the past to improve the present and be better prepared in case of future pandemics.
RESULTS
During the pandemic, the Task Force was engaged in several initiatives: the creation of the EAN NEuro-covid ReGistrY (ENERGY); the launch of several surveys (neurological manifestations of COVID-19 infection; the pandemic's impact on patients with chronic neurological diseases; the pandemic's impact of restrictions for clinical practice, curricular training, and health economics); the publication of position papers regarding the management of patients with neurological diseases during the pandemic, and vaccination hesitancy among people with chronic neurological disorders; and the creation of a dedicated "COVID-19 Breaking News" section in EANpages.
CONCLUSIONS
The EAN NeuroCOVID-19 Task Force was immediately engaged in various activities to participate in the fight against COVID-19. The Task Force's concerted strategy may serve as a foundation for upcoming global neurological emergencies
Positional trueness of three removable die designs with different root geometries manufactured using stereolithographic 3D printing.
Full text linkSTATEMENT OF PROBLEM
Three-dimensional (3D) printed casts are a suitable alternative to dental stone casts. Contemporary dental design computer programs permit designing definitive casts with removable dies with different root geometries and retention mechanisms. Studies on the positional trueness of 3D-printed removable dies with different root geometries are lacking.
PURPOSE
The purpose of this in vitro study was to investigate the 3D displacements of three 3D-printed removable die designs with different root geometries.
MATERIAL AND METHODS
The digital file of a dental stone alveolar cast with root-form removable dies (MOD UJ IV Fixed Prosthetics; Ivoclar AG) was used as a reference to create 3 removable die and alveolar cast designs (Root Form, RF; Conical, CON; Cylindric, CYL) with different root geometries in 2 dental design computer programs (DentalCAD 3.1 Rijeka; exocad; GmbH; InLab CAD 22.0; Dentsply Sirona). 3 equidistant Ø1-mm spheres (C, Cervical; M, Middle; O, Occlusal) were designed on the buccal surface of the coronal portion of the removable die to evaluate their displacement. A total of 45 alveolar casts with 45 removable dies were fabricated using a stereolithographic 3D printer (Form 3; Formlabs); each die group consisted of 15 specimens. After fabrication and postprocessing, the specimens were scanned, and their digital files were analyzed in a metrology-grade computer program to evaluate the displacement of the removable dies with respect to the position of the die in the master reference file. Subsequently, the data were analyzed using a 3-way analysis of variance (ANOVA) followed by step-down Bonferroni-corrected pairwise comparisons (α=.05).
RESULTS
Two statistically significant 2-way interactions were detected between the independent variables, die design and direction (P<.001), and location and direction (P<.001). The post hoc analysis identified significant differences between the displacement values of RF and CYL (P<.001) and RF and the CON (P<.001) designs on the Y axis. The measured displacements were statistically different between the C and O locations on the Y axis (P=.001) and the M and O locations on the Z axis (P=.006).
CONCLUSIONS
The root geometry of a 3D-printed removable die and alveolar cast can affect seating, and variable degrees of tipping of the removable die can be seen. The seating and congruence of the removable die with the interocclusal space and relationships observed intraorally should be confirmed before adjusting indirect restorations
Quality of life from the patient perspective at the end of the first rehabilitation after the onset of spinal cord injury/disorder - A qualitative interview-based study.
No full textCONTEXT
At present, there is a lack of information concerning patients' perspectives on their quality of life (QoL) after a recently acquired spinal cord injury/disorder (SCI/D).
OBJECTIVE
To explore patients' perspectives on their QoL during their first inpatient rehabilitation after the onset of SCI/D.
METHODS
Qualitative study. Semi-structured face-to-face interviews were conducted with 20 participants aged 18 years or older at least three months after the onset of SCI/D and two weeks before they were discharged from their first rehabilitation. Audio-recorded interviews were transcribed and analyzed according to the thematic content analysis. Interviewees rated their QoL with the SCI QoL data set.
RESULTS
The interviewees judged their satisfaction with life as a whole, their physical and mental health, as relatively high with values between six and eight (with 10 meaning complete satisfaction). They highlighted social aspects, health topics, and the experience of autonomy as relevant to their concept of QoL. The aspects that positively influenced QoL included the level of well-being in the current social and institutional environment, the increased level of energy, strength, and autonomy in daily life, and an improved mental state derived from general positive personal attitudes. In contrast, the social restrictions during the COVID-19 pandemic, physical issues including pain, a lack of progress associated with psychological dissatisfaction, and limitations in personal independence decreased patients' QoL.
CONCLUSION
Since the interviewees described different aspects from the areas of social, health and autonomy as important for their QoL, exploring and addressing these areas should be used to achieve an individualized first rehabilitation
Data sources:
BORIS Portal Bern Open Repository and I...BAF-Online: Proceedings of the Berner Al...HASBonline – Hefte zur Archäologie des M...Informationswissenschaft: Theorie, Metho...Jahrbuch Diakonie SchweizJournal of Eye Movement ResearchJournal of Radiation Oncology Informatic...BOP SerialsVersants. Revista suiza de literaturas r...BORIS ThesesAccess Repository Dashboard
Do you manage Bern Open Repository and Information System (BORIS)? Access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard!