4051 research outputs found
Sort by
An16-resilin: An advanced multi-stimuli-responsive resilin-mimetic protein polymer
No full textEngineered protein polymers that display responsiveness to multiple stimuli are emerging as a promising class of soft material with unprecedented functionality. The remarkable advancement in genetic engineering and biosynthesis has created the opportunity for precise control over the amino acid sequence, size, structure and resulting functions of such biomimetic proteins. Herein, we describe the multi-stimuli-responsive characteristics of a resilin-mimetic protein, An16-resilin (An16), derived from the consensus sequence of resilin gene in the mosquito Anopheles gambiae. We demonstrate that An16 is an intrinsically disordered protein that displays unusual dual-phase thermal transition behavior along with responsiveness to pH, ion, light and humidity. Identifying the molecular mechanisms that allow An16 to sense and switch in response to varying environments furthers the ability to design intelligent biomacromolecules. © 2014 Acta Materialia Inc
t-Na2(VO)P2O7: A 3.8 V Pyrophosphate Insertion Material
No full textPyrophosphate oxyanionic framework compounds offer a great platform to investigate new battery materials. In our continuing effort to explore pyrophosphate cathodes for sodium-ion batteries, we report, for the first time, the synthesis and use of tetragonal Na2(VO)P2O7 as a potential sodium-ion insertion material. This material can be easily prepared by using a conventional solid-state route at a relatively low temperature of 400 °C. Stabilizing as a tetragonal structure with an open framework, the material offers pathways for Na+ diffusion. The as-synthesized material, with no further cathode optimization, yields a reversible capacity (Q) approaching 80 mAh g−1 (QTheoretical=93.4 mAh g−1) involving a one electron V5+/V4+ redox potential located at 3.8 V (vs. Na/Na+). Furthermore, the material exhibits decent rate kinetics and reversibility. Combining green synthesis and moderate electrochemical properties, t-Na2(VO)P2O7 is reported as a new addition to the growing family of pyrophosphate cathodes for sodium-ion batteries.© 2014, WILEY-VCH Verlag GmbH & Co. KGaA, Weinhei
Study of gamma irradiation effect on commercial TiO2 photocatalyst
No full textThe aim of this work is to understand the effect of gamma irradiation on commercial TiO2 photocatalyst for water treatment applications. Previous studies concluded that gamma-irradiation is able to modify the electronic properties of TiO2 based photocatalysts and consequently their photocatalytic performance. However, there are some discrepancies in the literature where on one hand a significant enhancement of the material properties is reported and on the other hand only a weak effect is observed. In this study a surface effect on TiO2 is confirmed by using low and medium gamma irradiation doses.© 2014, Elsevier Ltd
Palaeohydrological evolution and implications for palaeoclimate since the Late Glacial at Laguna de Fuente de Piedra, southern Spain
No full textHere, we present a terrestrial multi-proxy record of Late Quaternary environmental changes in the southern Iberian Peninsula covering approximately 30 ka. This sedimentary record originates from a saline playa lake (Laguna de Fuente de Piedra) hosted within a complex geological setting dominated by Triassic claystones and evaporites, Jurassic carbonates and Miocene deposits leading to a complex hydrogeological setting. Dissolution of evaporites in the catchment and intense evaporation are responsible for saline waters fluctuating in the basin. Thus, salinity as palaeohydrological proxy, requires a decoupling of internal and external hydrogeochemical processes. The greatest accumulation of evaporites in the LFP late Pleistocene–Holocene record coincides with a more humid or, at least, less evaporative, period. Based on multi-proxy data we describe five lacustrine lithofacies (2–5), and fluvial deposits (1) from sediment cores. The proposed conceptual lake margin model contains three main lake water stages repeated within the sedimentary succession and building up the characteristic lithofacies. Lake water stages refer to a flooding stage (influx > outflux), high water stage (influx = outflux), and low water stage (influx < outflux). The lithostratigraphy reveals a palaeohydrological record suggesting climate changes and associated lake level fluctuations. Lake level oscillations of different amplitudes have been identified. Low amplitude changes have been revealed for the periods from 28 ka cal BP to 17.5 ka cal BP and from 8.2 ka cal BP to present, whereas in between (17.5 ka cal BP to 8.2 ka cal BP) the Late Pleistocene/Holocene transition shows high amplitude lake level changes. The latter coincides with an increased influence of saline subsurface waters, due to groundwater level rising (sulfate signature). In contrast, the Holocene, records the low amplitude oscillations and a drop of the groundwater levels, which creates a less saline or fresher footprint in the sediments (carbonate signature). Thus, the periods of low amplitude lake level oscillations, low inputs of clastics and low groundwater levels (drier) coincide with periods of minimal seasonal insolation difference. In contrast, the period of higher amplitude lake level oscillations, higher input of clastics and higher groundwater table (wetter) is correlative to periods of maximum difference between summer and winter insolation. © 2016, Elsevier Ltd and INQUA
Versatile and scalable synthesis of graphene nanoribbons
No full textThe inability to readily upscale nanofabrication of carbon nanomaterials often restricts their application, despite outstanding performances reported in both the research laboratory and prototype stages. Here we report the direct chemical synthesis of graphene nanoribbons by a bottom-up approach based on the common laboratory reagents sodium and propanol; these are solvothermally reacted to give an intermediate precursor that is then rapidly pyrolized yielding single- and few-layer graphene nanoribbons. Our results show that confinement of the lateral dimensions of graphene can be achieved simply by varying the alcohol feedstock. The ability to produce bulk quantities of graphene nanoribbons by a low cost and scalable approach is anticipated to enable a wider range of affordable real-world graphene applications. © 2014 Elsevier B.V
Complementary terahertz absorption and inelastic neutron study of the dynamic anisotropy contribution to zone-center spin waves in a canted antiferromagnet NdFeO3
No full textWe employ a combination of pulsed- and continuous-wave polarized terahertz spectroscopy techniques to probe temperature-dependent spin waves in the antiferromagnet NdFeO3. Our optical data span 1.6–467 K and reveal a conspicuous spin reorientation between 110 and 170 K, during which the lower-energy mode softens completely. Complementary inelastic neutron scattering reveals that the frequencies of the optically excited spin waves are consistent with a temperature-variable spin gap in the low-energy spin-wave dispersion of NdFeO3. The result links the temperature dependence of the spin waves to a dynamic in-plane anisotropy. The magnetic anisotropy is calculated based on the results of the optical measurements. The change observed in the anisotropy energy along the a and c crystal axes suggests that the spin reorientation evident in NdFeO3 is driven by temperature-dependent in-plane anisotropy.© 2014, American Physical Society
Challenges in understanding the sources of bioaccumulated metals in biota inhabiting turbid river systems
No full textBioaccumulation of As, Cd, Cu, Pb and Zn by Macrobrachium prawns was observed to occur in the Strickland River downstream of a gold mine at Porgera, Papua New Guinea. This was despite the total metal concentrations of waters and sediments indicating no difference from reference sites within tributaries. To provide information on potential sources and bioavailability of metals to prawns, an extensive range of analyses were made on waters, suspended solids, deposited sediments and plant materials within the river system. Dissolved metal concentrations were mostly sub-micrograms per liter and no major differences existed in concentrations or speciation between sites within the Strickland River or its tributaries. Similarly, no differences were detected between sites for total or dilute acid-extractable metal concentrations in bed sediments and plant materials, which may be ingested by the prawns. However, the rivers in this region are highly turbid and the dilute acid-extractable cadmium and zinc concentrations in suspended solids were greater at sites in the Strickland River than at sites in tributaries. The results indicated that mine-derived inputs increased the proportion of these forms of metals or metalloids in the Strickland River. These less strongly bound metals and metalloids would be more bioavailable to the prawns via the dietary pathway. The results highlighted many of the difficulties in using routine monitoring data without information on metal speciation to describe metal uptake and predict potential effects when concentrations are low and similar to background. The study indicated that the monitoring of contaminant concentrations in organisms that integrate the exposure from multiple exposure routes and durations may often be more effective for detecting impacts than intermittent monitoring of contaminants in waters and sediments
Microstructural Evolution of an Ion Irradiated Ni–Mo–Cr–Fe Alloy at Elevated Temperatures
No full textThe irradiation behavior of a Ni–Mo–Cr–Fe alloy, of the type currently being considered for use in future molten salt cooled reactors, has been investigated in situ using 1 MeV Kr ions at temperatures of 723 and 973 K. When irradiated to 5 dpa, experimental observations reveal the instantaneous formation and annihilation of point defect clusters, with such processes attributed to the long range elastic interactions that occur between defects through multiple intra-cascade overlap. Corresponding differences in the defect cluster density and size distribution suggest that changes to the microstructure were dependent upon temperature and dose, affecting the growth, accumulation and mobility of irradiation-induced defect clusters under these conditions. © 2014,The Japan Institute of Metals and Materials
Dynamical mechanism of phase transitions in A-site ferroelectric relaxor (Na1/2Bi1/2)TiO3
No full textThe dynamical phase transition mechanism of (Na1/2Bi1/2)TiO3 (NBT) was studied using inelastic neutron scattering. Softening was observed of multiple phonon modes in the phase transition sequence of NBT. As usual, the softening of the zone center transverse optical modes Δ5 and Σ3 was observed in the (200) and (220) zones, showing the Ti vibration instabilities in TiO6 octahedra for both cubic-tetragonal (C-T) and tetragonal-rhombohedral (T-R) phase transitions. In these two phase transitions, however, Ti4+ has different preferential displacement directions. Surprisingly, the longitudinal optic mode also softens significantly toward the zone center in the range of the transition temperature, indicating the Na+/Bi3+ vibration instability against TiO6 octahedra during the T-R phase transition. Strong inelastic diffuse scattering shows up near M(1.5, 0.5, 0) and R(1.5, 1.5, 0.5) in the tetragonal and rhombohedral phases, respectively, indicating the condensations of the M3 and R25 optic modes for the corresponding transitions. This reveals the different rotation instabilities of TiO6 in the corresponding transition temperature range. Bottleneck or waterfall features were observed in the dispersion curves at certain temperatures but did not show close correlations to the formation of polar nanoregions. Additional instabilities could be the origin of the complexity of phase transitions and crystallographic structures in NBT.© 2014, American Physical Society
Identifying heavy metal levels in historical flood water deposits using sediment cores
No full textWhen designing mitigation and restoration strategies for aquatic systems affected by heavy metal contamination, we must first understand the sources of these pollutants. In this study, we introduce a methodology that identifies the heavy metal levels in floodplain lake sediments deposited by one source; fluvial floods. This is done by comparing sediment core heavy metal profiles (i.e., historical pollution trends) to physical and chemical properties of sediments in these cores (i.e., historical flooding trends). This methodology is applied to Willsmere and Bolin Billabongs, two urban floodplain lakes (billabongs) of the Yarra River (South-East Australia). Both billabongs are periodically inundated by flooding of the Yarra River and one billabong (Willsmere Billabong) is connected to an urban stormwater drainage network. 1–2-m long sediment cores (containing sediment deposits up to 500 years old) were taken from the billabongs and analysed for heavy metal concentrations (arsenic, chromium, copper, lead, nickel, zinc). In cores from both billabongs, arsenic concentrations are high in the flood-borne sediments. In Bolin Billabong, absolute metal levels are similar in flood and non-flood deposits. In Willsmere Billabong, absolute copper, lead and zinc levels were generally lower in fluvial flood-borne sediments in the core compared to non-fluvial sediments. This suggests that heavy metal concentrations in Bolin Billabong sediments are relatively similar regardless of whether or not fluvial flooding is occurring. However for Willsmere Billabong, heavy metal concentrations are high when overland runoff, direct urban stormwater discharges or atmospheric deposition is occurring. As such, reducing the heavy metal concentrations in these transport pathways will be of great importance when trying to reduce heavy metal concentrations in Willsmere Billabong sediments. This study presents a proof-of-concept that can be applied to other polluted aquatic systems, to understand the importance of river floods in the contamination of the bed sediments of aquatic systems. As a cost effective and less time consuming alternative to extensive field monitoring, our proposed method can be used to identify the key sources of pollution and therefore support the development of effective management strategies. © 2016, Elsevier Ltd