DIFFER: Publications
Not a member yet
3526 research outputs found
Sort by
Neural-network accelerated coupled core-pedestal simulations with self-consistent transport of impurities and compatible with ITER IMAS
Full text linkAn integrated modeling workflow capable of finding the steady-state plasma solution with self-consistent core transport, pedestal structure, current profile, and plasma equilibrium physics has been developed and tested against a DIII-D discharge. Key features of the achieved core-pedestal coupled workflow are its ability to account for the transport of impurities in the plasma self-consistently, as well as its use of machine learning accelerated models for the pedestal structure and for the turbulent transport physics. Notably, the coupled workflow is implemented within the One Modeling Framework for Integrated Tasks (OMFIT) framework, and makes use of the ITER integrated modeling and analysis suite data structure for exchanging data among the physics codes that are involved in the simulations. Such technical advance has been facilitated by the development of a new numerical library named ordered multidimensional arrays structure.</p
Device Performance of Emerging Photovoltaic Materials (Version 1)
No full textEmerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye-sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi-junction PVs. Nevertheless, it can be very time consuming to find or develop an up-to-date overview of the state-of-the-art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state-of-the-art emerging PVs
Kalman Filter density reconstruction in ICRH discharges on ASDEX Upgrade
No full textPlasma density is one of the key quantities that need to be controlled in real-time as it scales directly with fusion power and, if left uncontrolled, density limits can be reached leading to a disruption. On ASDEX Upgrade (AUG), the real-time measurements are the line-integrated density, measured by the interferometers, and the average density derived from the bremsstrahlung measured by spectroscopy. For control, these measurements are used to reconstruct the radial density profile using an extended Kalman filter (EKF). However, in discharges where ion cyclotron resonance heating (ICRH) is used, the measurements from the interferometers are corrupted and the reconstructed density is false. In this paper, the existing EKF implementation is improved, implemented and experimentally verified on AUG. The new EKF includes a new particle transport model in the prediction model RAPDENS as well as a new representation of ionization and recombination. Furthermore, an algorithm was introduced that is capable of detecting the corrupt diagnostics; this algorithm is based on the rate of change of the innovation residual. The changes to the RAPDENS observer resulted in better density reconstruction in ICRH discharges where corrupt measurement occur. The new version has been implemented on the real-time control system at AUG and functions properly in ICRH discharges
Power deposition behavior of high-density transient hydrogen plasma on tungsten in Magnum-PSI
No full textThe lifetime of plasma-facing components (PFCs) will have a strong influence on the efficiency and viability of future fusion power plants. However, the PFCs suffer from thermal stresses and physical sputtering induced by edge-localized modes (ELMs). ELMs in future fusion devices are expected to occur with a high plasma density compared to current day devices such that coupling of recycling neutrals and plasma ions will be strong. Because of the scale hierarchy of future fusion devices compared to the present ones, the influence of this coupling is difficult to predict. Here, we investigate the ELM-like hydrogen plasma induced heat loads on tungsten in the linear device Magnum-PSI, producing similar to 1 ms plasma pulses with electron densities up to 3.5 x 10(21) m(-3). A combination of time-resolved Thomson scattering and coherent Thomson scattering was used to acquire plasma parameters in front of the target. Moreover, a fast infrared camera coupled to finite element thermal analyses allowed to determine the deposited heat loads on the target. We found a significant inconsistency between the plasma power calculated with a conventional collisionless sheath model and the absorbed power by the target. Moreover, plasma stagnation upstream and plasma cooling downstream were observed during the pulses. The observations are explained based on ionization and elastic collisions between the recycling neutrals and plasma ions. The results highlight the impact of plasma-neutral interaction on the power deposition behavior of ELM-like hydrogen plasma on tungsten.</p
Conceptual design of a liquid-metal divertor for the European DEMO
No full textLiquid metal (LM) divertors are considered for the European DEMO reactor, because they may offer improved performance compared to the tungsten monoblock concept. The goal of this work is to provide a concept design, and explore the limitations of liquid metal divertors. To this end, a set of design requirements was formulated in close collaboration with the EUROfusion Power Plant Physics and Technology team (responsible for the design of the EU-DEMO). Tin was chosen as the preferred liquid metal, because unacceptable Tritium retention issues arise when lithium is used in DEMO. A concept design was then chosen that consists of water cooled pipes that are square on the outside and round on the inside, a corrosion barrier, and a 3D-printed porous tungsten armor layer filled with liquid tin. The porous armor layer acts as a Capillary Porous System (CPS). The design was analyzed using thermo-mechanical FEM simulations for various armor thicknesses and heat sink materials: Densimet, W/Cu composites, and CuCrZr. The highest heat loading capability achieved is 26.5 MW/m2 in steady state (18.9 MW/m2 when taking into account a safety margin of 1.4). This is achieved using a CuCrZr pipe, with a 1.9 mm thick armor. When increasing the armor layer to 3 mm thick, more than 80 MW/m2 can be withstood during slow transients thanks to vapor shielding, but at the same time the steady-state capability is reduced to 18 MW/m2. Resilience against disruptions cannot yet be proven, but is deemed within the realm of possibility based on estimates regarding the behavior of vapor shielding. This should be further investigated. Overall, the concept is considered a significant improvement compared to the original specifications (which are also the specifications to the tungsten monoblocks: 10 MW/m2 in steady state, and ~20 MW/m2 during slow transients). Moreover, the possibility of withstanding disruptions is regarded as a potentially major improvement
SOLPS-ITER validation with TCV L-mode discharges
Full text linkThis work presents a quantitative test of SOLPS-ITER simulations against tokamak à configuration variable (TCV) L-mode experiments. These simulations account for drifts, currents, kinetic neutrals, and carbon impurities providing the most complete edge transport simulations for TCV to date. The comparison is performed on nominally identical discharges carried out to assess the effectiveness of TCV\u27s divertor baffles in the framework of the European Plasma Exhaust program and employs numerous edge diagnostics providing a detailed code-experiment benchmark for TCV. The simulations show a qualitative consistency, but the quantitative differences remain, which are assessed herein. It is found that, for a given separatrix density, the simulations most notably yield a colder, and denser, divertor state with a higher divertor neutral pressure than measured.</p
Ultrafast photoinduced heat generation by plasmonic HfN nanoparticles
No full textThere is great interest in the development of alternatives to noble metals for plasmonic nanostructures. Transition metal nitrides are promising due to their robust refractory properties. However, the photophysics of these nanostructures, particularly the hot carrier dynamics and photothermal response on ultrafast timescales, are not well understood. This limits their implementation in applications such as photothermal catalysis or solar thermophotovoltaics. In this study, the light-induced relaxation processes in water-dispersed HfN nanoparticles are, for the first time, elucidated by fs transient absorption, Lumerical FDTD and COMSOL Multiphysics simulations, and temperature-dependent ellipsometry. It is unequivocally demonstrated that HfN nanoparticles convert absorbed photons into heat within <100 fs; no signature of hot charge carriers is observed. Interestingly, under high photon energy or intense irradiation stimulated Raman scattering characteristic of oxynitride surface termination is observed. These findings suggest that transition metal nitrides could offer benefits over noble metals in the field of plasmonic photothermal catalysis
Combined high fluence and high cycle number transient loading of ITER-like monoblocks in Magnum-PSI
Full text linkIt is highly desirable to understand the long term evolution of the divertor material under the extreme steady-state and transient heat and particle loads expected during ITER operation. Here the impact of ELM-like transient loading under combined high-flux plasma and transient ELM-like heat loading in Magnum-PSI was explored to determine how plasma affects the fatigue cracking threshold of tungsten due to ELMs. Mock-ups consisting of five ITER-like monoblocks in a chain were simultaneously exposed to high flux plasma and a high power pulsed laser which closely simulated the ELM impact in terms of heat flux and duration. Loading conditions were chosen to enable comparison to existing data from electron-beam loading, while the influence of surface base temperature (750 °C, 1150 °C or 1500 °C) and impurity seeding (addition of 6.5ion% He+ and/or 8ion% Ne+) were also investigated. The plasma loading leads to differences in surface morphology and indicates synergistic effects on the extent of the surface damage. Base temperatures at or above 1150 °C are found to lead to a significant reduction in the fatigue cracking threshold by a factor of two or more compared to at 750 °C. Cracked surfaces are found to be more than ten times rougher than the original microstructure, and additionally when seeding impurities are added surface roughness can be significantly increased by up closely factor of two compared to roughening using pure H plasma. Overall the results indicate that avoiding fatigue cracking in ITER will be very challenging, and that understanding the level to which this can therefore be tolerated is vital for anticipating divertor lifetime and reliability.</p
