Institutional Repository of Institute of Modern Physics, CAS
Not a member yet
5769 research outputs found
Sort by
Modification of Fe/Cu multilayers under 400 keV Xe20+ irradiation
No full textTwo kinds of Fe/Cu multilayers with different modulation wavelength were deposited on cleaved Si(100) substrates and then irradiated at room temperature using 400 keV Xe20+ in a wide range of irradiation fluences. As a comparison, thermal annealing at 300-900 degrees C was also carried out in vacuum. Then the samples were analyzed by XRD and the evolution of crystallite structures induced by irradiation was investigated. The obtained XRD patterns showed that, with increase of the irradiation fluence, the peaks of Fe became weaker, the peaks related to Cu-based fcc solid solution and Fe-based bcc solid solution phase became visible and the former became strong gradually. This implied that the intermixing at the Fe/Cu interface induced by ion irradiation resulted in the formation of the new phases which could not be achieved by thermal annealing. The possible intermixing mechanism of Fe/Cu multilayers induced by energetic ion irradiation was briefly discussed.NSFC 10475102
10125522
Science Foundation of the Chinese Academy of Science
Rotating wheel filter design and optimization for a uniform depth dose distribution in heavy ion therapy
No full textTreatment planning of heavy-ion radiotherapy involves predictive calculation of not only the physical dose but also the biological dose in a patient body. The goal in designing beam-modulating devices for heavy ion therapy is to achieve uniform biological effects across the spread-out Bragg peak (SOBP). To achieve this, a mathematical model of Bragg peak movement is presented. The parameters of this model have been resolved with Monte Carlo method. And a rotating wheel filter is designed basing on the velocity of the Bragg peak movement
Influence of two different representations of the G-matrix to the in-medium nucleon-nucleon cross sections
No full textWe calculate the in-medium nucleon-nucleon scattering cross sections from the G-matrix using the Dirac-Brueckner-Hartree-Fock (DBHF) approach. And we investigate the influence of the different representations of the G-matrix to the cross sections, the difference of which is mainly from the different effective masses.National Natural Science Foundation of China 10575119
10775061
Asia-Link Project of the European Commission CN/ASIA-LINK/008(94791
Charge stripping accumulation of light heavy ions in HIRFL-CSR main ring
No full textThe charge stripping injection method has been adopted for the accumulation of light heavy ions in HIRFL-CSR. This method has some special requirements for the accelerating particles, and at the same time the structure of the injection orbit has to be changed. In this paper, the design of the orbit has been presented, as well as the calculation of the beam line matching. According to the result of commissioning, stripping injection can accumulate the beam to a higher current.National Scientific Project HIRFL-CS
Preparation and characterization of CdS nanotubes and nanowires by electrochemical synthesis in ion-track templates
No full textCdS nanotubes and nanowires have been synthesized with controlled dimensions by means of template-electrodeposition method in etched ion-track membranes. The diameters of nanotubes and nanowires are between 20 and I 10 nm, and the lengths are up to tens of micrometers. X-ray diffraction (XRD) and selected area electron diffraction (SAED) pattern investigations demonstrate that CdS nanotubes and nanowires are polycrystalline in nature. The UV-vis absorption spectra of CdS nanotubes and nanowires embedded in polycarbonate (PC) membranes show that the absorption edges of PC films shift towards the shorter wavelength, with decreasing diameters of the deposited nanostructures. The results indicate that nanowires are formed from nanotubes by nanotube-stuffing-growth mechanism
基于MSP430单片机和DS18B20的多分支多通道精密温度测量系统研究
No full text简要介绍了1-Wire总线协议的原理和数字温度传感器DS18B20以及超低功耗16位混合信号处理器MSP430F149的基本特性,结合上位机PC组成了一个多分支多通道精密温度测量系统。并给出实现多分支多通道温度测量的软件流程图以及测量结果的简要分析。整个系统结构简单,抗干扰能力强,性能稳定,测温精度达到0.0625℃,单处理器芯片可以实现40个测量点的数据采集
离子束生物技术及其在玉米育种中的应用
No full text离子束作为一种新兴诱变源,已广泛应用于各种农作物的诱变育种。离子束生物技术为玉米品种的改良和种质资源的创新开辟了一条新的途径,推动了玉米育种事业的长足发展。本文阐述了离子束的特点、诱变机理以及在玉米育种中的应用
碳离子辐照诱变产生的甜高粱M2代幼苗对高温胁迫的响应
No full text甜高粱(Sorghum bicolor(L)Moench)"凯勒"种子经不同剂量(0、10Gy、30Gy、50Gy、80Gy)80MeV/u碳离子注入后,其M2代幼苗对40℃高温胁迫作出了不同的响应:株高、叶绿素含量变化不大,相对低剂量(10Gy、30Gy)碳离子处理使M2代幼苗生物量高于对照CK(0Gy)和高剂量(50Gy、80Gy)处理,同时从丙二醛(Malondialdehyde,MDA)和可溶性糖含量的变化来看,30Gy碳离子辐射处理组MDA和可溶性糖含量降低,提高了M2代幼苗的高温抗性
电化学方法制备Si阵列微孔的工艺研究
No full text对用电化学方法制备Si大孔阵列管坑工艺进行了初步探索。通过对Si在KOH溶液中各向异性湿法蚀刻和在HF酸溶液中的电化学蚀刻过程中各种参数的摸索,确定在室温下制备大孔阵列的最佳配比浓度,蚀刻出符合要求的管坑阵列,为进一步制备结构化闪烁屏奠定了实验基础
~(12)C~(6+)离子辐射对细胞存活增殖及模拟失重和辐射对家蚕卵发育的影响
No full text目的:观察重离子辐射后人骨肉瘤细胞MG-63、人胚胎皮肤成纤维细胞ESF-1和人胚胎肝正常细胞HEL-1的生存和增殖情况,及重离子辐射和模拟失重环境处理后家蚕卵的孵化和发育情况,初步探讨重离子辐射对细胞及复合环境对家蚕卵的一些生物学效应.方法:利用超导磁体模拟失重环境,利用重离子加速器产生12C6+离子,用不同剂量辐射细胞和家蚕卵,检测在重离子辐射后细胞的存活和克隆形成能力及复合条件下家蚕卵的发育情况.结果:HEL-1细胞在0.1Gy时存活率已经开始降低,且随辐射剂量的增大这种影响也增加,到1.5Gy时存活率降低50%.ESF-1细胞在1.5Gy时存活率下降约20%,但辐射对骨肉瘤MG-63细胞的存活率影响不大.HEL-1和ESF-1细胞受到0.1Gy的辐射后克隆形成能力就明显降低90.2%和79.1%,而MG-63细胞一直保持较高的克隆形成率,直到1.5Gy时迅速降低75%.家蚕的出蚁率随辐射剂量的增大而降低,到30Gy时出蚁率降到2.22%.当辐射剂量为0～10Gy时,家蚕卵在两种不同重力条件下的孵化率没有明显差异.但当辐射剂量增加到15,20和30Gy时,失重环境明显促进了家蚕卵的孵化.另外,失重环境下家蚕卵的孵化时间比正常条件下缩短约3d左右.同时,高剂量的辐射处理会延迟家蚕幼虫的生长.结论:重离子辐射降低了细胞的存活和增殖能力,同时影响了家蚕从受精卵到幼虫的发育,降低了出蚁率.失重环境可以缩短家蚕卵的孵化时间