Riga Technical University

Riga Technical University Repository
Not a member yet
    18420 research outputs found

    Zemes – ūdens siltumsūkņu projektu analīze

    No full text
    Rakstā apskatītas ģeotermālo siltumsūkņu uzstādīšanas projektu īpatnības, siltuma kolektoru izvietošanas īpatnības un konstrukcijas

    How is the Thermal Stratification of Solar Heating Systems Influenced by Thermal Stratification in the Tanks

    No full text
    Evaluation of thermal stratification in the tanks influence on thermal stratification of solar heating systems performance

    Passive house in Latvia

    No full text
    The paper considers the scope for building the so-called passive houses in Latvia. For modeling a passive house that could be adapted to the Latvian climate, the computer program TRNSYS has been created, which made it possible to obtain the thermally-technical parameters that are needed for designing private houses in Latvia and meet the passive building criteria

    The Research into the Self-Starting Mode of the Induction Motor

    No full text
    Mūsdienās pašpalaides teorijas izstrāde ir sasniegts līmenis, kas ļauj risināt praktiskus jautājumus. Īsslēguma strāvu praktiskie aprēķini un arī asinhrono dzinēju pašpalaišanas aprēķini ir jāveic elektroenerģētiskajos objektos. Šajā darbā tiek aplūkoti asinhronā dzinēja pašpalaides procesa matemātiskās modelēšanas jautājumi, kurus apraksta diferenciālvienādojumi d,q,0 koordinātu sistēmā. Pašpalaides režīma pētījuma rezultātā var secināt, ka īslaicīga elektroapgādes traucējuma gadījumā, ja to izraisījis dziļš barojošā sprieguma samazinājums, atjaunojot sprieguma padevi, pašpalaides strāvas nepārsniedz parastās palaišanas strāvas. Gadījumā, kad notiek īslaicīgs barošanas pārtraukums ar darba barošanas atslēgšanu un pāreju uz rezerves avotu vai sprieguma atjaunošanu barošanas kopnēs, pašpalaišanas process asinhronā dzinēja rotora lauka esamības gadījumā var būt bīstamāks, ja sprieguma padeve tiek atjaunota diezgan ātri

    Calcium Phosphates for Clinical Application with Variable Phase Composition: Synthesis and Characterization

    No full text
    Hydroxyapatite (HAp) and β-tricalcium phosphate (β-TCP) represent the main types of calcium phosphates use for bone and dental surgery. HAp is thermodynamically the most stable phase in physiological conditions and has the ability to form direct chemical bonding with living tissues while β-TCP is a resorbable material and stimulates new bone formation. Biphasic calcium phosphates (BCP) were developed to combine the high bioactivity of HAp and bioresorbability of β-TCP. These properties can be controlled by varying HAp/β-TCP ratio. Hydroxyapatite (HAp), β-tricalcium phosphate (β-TCP) and mixtures of HAp/β-TCP in different proportions were synthesized by wet chemical precipitation method in aqueous medium using calcium hydroxide suspension and orthophosphoric acid solution as starting materials. This method is characterized by simple process, low cost and easy application in industrial production. The aim of this study was to investigate the influence of wet chemical precipitation conditions on calcium phosphates to control not only the phase composition, but also chemical composition, particle morphology and sinterability. The phase identification, chemical composition, morphological characteristics and sintering behaviour were investigated by X-ray powder diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). The phase composition of calcium phosphates is found to be highly dependent on the changes in technological parameters such as temperature, pH of synthesis and thermal processing

    Bridge Management within Latvian Road Administration

    No full text

    Highway Composite Bridge: Rehabilitation and Strengthening

    No full text

    Simetriskas vanšu sistēmas ar vienu centrālo laidumu analītiska izpēte

    No full text
    Tiltu konstrukciju projektēšanas optimizācija prasa pilnveidot aprēķinu metodes, nesamazinot to drošību. Piepūļu regulēšana vantīs, izmantojot [1] piedāvāto idealizētā elastības moduļa izteiksmi, ir viens no veidiem, kā samazināt piepūles vanšu tilta laidumu konstrukcijās, līdz ar to vienkāršojot to konstruktīvos risinājumus un samazinot izmaksas. Pētījuma mērķis ir pārbaudīt [1] analītiski iegūtās likumsakarības un analizēt to funkcijas, respektīvi, noskaidrot apskatāmo vanšu tiltu nesošo elementu – stingrības sijas un vanšu īpašību ietekmi uz sistēmas deformācijām un piepūlēm tajā. Tas ļautu izstrādāt optimālus tilta brauktuves konstrukciju šķērsgriezuma parametrus

    Tiltu specifikācijas 2005

    No full text
    Grāmatā dotas specifikācijas tiltu būvniecība

    Biphasic Calcium Phosphate Bioceramics Prepared by Changing Ca/P Ratio of Hydroxyapatite

    No full text
    Šajā darbā iegūta divfāzu kalcija fofātu keramika (hidroksilapatīts/β-trikalcija fosfāts), kā izejvielas izmantojot hidroksilapatītu un kalcija metafosfāta stiklu vai kalcija dihidrigēnfosfātu. Hidroksilapatīta Ca/P attiecība tika pazemināta pievienojot kalcija metafosfāta stiklu ar Ca/P attiecību 0,5 vai kalcija dihidrogēnfosfātu ar Ca/P attiecību 0,5. Pēc apdedzināšanas tika iegūts hidroksilapatīta un β-trikalcija fosfāta keramika. Fāžu sastāvs tika noteikts izmantojot rentgendifrakciju. Analizētas iegūtās keramikas īpašības

    0

    full texts

    18,420

    metadata records
    Updated in last 30 days.
    Riga Technical University Repository
    Access Repository Dashboard
    Do you manage Open Research Online? Become a CORE Member to access insider analytics, issue reports and manage access to outputs from your repository in the CORE Repository Dashboard! 👇