Journal of Lithic Studies
Not a member yet
375 research outputs found
Sort by
The earliest transverse grooved stones of Eurasia: Near Eastern distribution, types and chronology
Full text linkTransverse grooved stones (TGS) believed to be used as shaft straighteners, first made their appearance at Epipalaeolithic sites in the Near East from where they spread to the Mediterranean coasts of Africa and Europe, but mostly to Northern Eurasia (the steppe, forest-steppe, and semi-desert zones). It has been discovered that the spread of TGA has been carried out along different paths. Moreover, grooved stones along each of these transmission routes can be distinguished by their unique decorative and morphological characteristics.
The aim of this paper is to clarify the circumstances and the date of appearance of the first TGS, localization of their initial areas, and identification of their respective decorative and morphological features. This is a necessary condition for identifying the starting points of the subsequent transit carriers of TGS\u27 tradition and tracing the directions of interaction in Eurasia during the end of the Pleistocene – the first half of the Holocene period using TGS as markers.
The initial database was formed on the basis of the scientific publications on the Near East. The following is a presentation of the analytical review of at least 200 grooved stones and 80 sites in their starting area in south-western Asia. The analysis used a systematic approach with emphasis on chronology, environment, petrography, morphology, functional-typological data where such were available, and TGS’ decor. But first of all, the study pays attention to the distribution of TGS and their cultural and chronological boundaries in this region. For this purpose, it was performed the mapping of findings in two chronological levels – up to 8000 thousand BCE and after, with the marking of decorated products.
The results enabled us to detect that the geographical spread of grooved artefacts of this type is limited in the Near East to the area of central Anatolia and Fertile Crescent, with a boundary along the desert-steppes. At least three concentrations can be clearly distinguished: the Levant, Zagros Mountains, and Upper Mesopotamia - central Anatolia, where the products are characterized by specific features of decorative and morphological design and in one case (Levant) an additional observed petrographic specificity. Currently, the earliest cases are recorded in Early Natufian contexts in the Levant and in Epipalaeolithic contexts of the Anatolian plateau since the 13th millennium cal BCE. Thus, one can confidently state that the introduction of TGS in the Middle East is generally linked to the Epipalaeolithic sites (Natufian, Harifian, and Western Zarzian) and is definitely associated with hunter-gatherers. The heyday of TGS falls on the PPNA and lasts to the beginning of the early Bronze Age, when they finally disappear
Book review: Anthropomorphic images in rock art paintings and rock carvings
Full text linkAnthropomorphic Images in Rock Art Paintings and Rock Carvings
by Terence Meaden and Herman Bender
Archaeopress, 2020, pp. 322. ISBN 978-178-969-357-7
https://www.archaeopress.com/archaeopressshop/public/displayProductDetail.asp?id={19B19455-613A-41E7-968F-D99720CA62C2
The Guinardera quarry (Sant Martí de Tous, Barcelona): A new chert exploitation location during historical times
Full text linkIn 2014, an anthropic accumulation of chert material was discovered in La Guinardera area, at the southwest of the Sant Martí de Tous town (Barcelona, NE Iberian Peninsula). In 2018 a first archaeological intervention was carried out in two locations: La Guinardera and La Guinardera Nord. After the fieldworks, these two accumulations were interpreted as chert workshops. These workshops are in the St. Genís Formation, included within La Noguera lacustrine system and dated to the Priabonian age (upper Eocene). The St. Martí de Tous area presents shallow lacustrine conditions typical of sabkha environments, in which layers of gypsums and sandy lutites are interspersed with tabular red sandstone levels, yielding different varieties of chert.
The Guinardera chert is characterized by a fairly homogeneous matrix, presenting a fine texture, with a microcrystalline and spherulitic length-slow chalcedony matrix, and a combination of grey colours, in general of dark hues, with an opaque diaphaneity but translucent at the edges.
The archaeological assemblage from La Guinardera Nord site allows us to identify a chert workshop for the production of gunflints. The heterogeneity of the assemblage at La Guinardera site precludes assigning it to any single chrono-cultural period or function.
The technological characterization of La Guinardera Nord site reveals distinctive attributes of a gunflint workshop that can be differentiated from prehistoric workshops. The presence of square and thick preforms, oxide traces on butts and ventral faces, marked bulbs and thick platforms, together with fresh edges on flakes and blades and the near-absence of patinated materials, corroborate it.
The presence of these two deposits within the above-mentioned formation shows us a repeated landscape exploitation pattern for raw material extraction, since references chert use range from the Middle Palaeolithic (e.g., Abric Romaní) to historical times (e.g., La Guinardera Nord)
Raw material provenance of silicite artefacts: Korobchyne-kurhan, Central Ukraine
No full textKorobchyne-kurhan stone age site in the Velyka Vys River basin, in Central Ukraine is investigated for raw material and contacts. The surrounding geography and the site are presented. The extensive search of outcrops around the monument resulted in nearer outcrops than was previously expected. Scientific investigations on 15 artefacts from Korobchyne-kurhan using non-destructive microfacies analysis allows us to have a first insight in the raw materials used by the prehistoric people and to give a detailed description from the encountered silicite varieties. Interestingly artefacts, composed of two different materials were found. That work confirms the use of the local materials as well as of some other material of yet unknown origin. The exogenous material is as well testified in younger sites in the Southern Buh River valley farther to the west
Lithic raw material in the Cantabrian region: Dialectical relationship between flint and quartzite in the Palaeolithic record
Full text linkThe increase, in quantitative and qualitative terms, of research attending to the geological nature of rocks found in archaeological contexts is changing our perspectives about social and economic territories articulated by Palaeolithic societies in the Cantabrian Region. Practically the only raw material researched in a solid geoarchaeological approach in this area is flint. This paper addresses how the near absence of in-depth geoarchaeological research into raw materials other than flint is modifying our perception of the procurement and management mechanism of raw material in the Cantabrian Region during the Palaeolithic.
To consider this matter in depth, we present the bibliographic and quantitative analysis of 30 representative archaeological sites from the Cantabrian Region whose assemblages were described lithologically using basic and primary categories. The state of play depicts a geographic distribution of raw material in the Cantabrian Region where quartzite is associated with the western sector and flint with the east. Interconnected with this axis, there is a chronological tendency that promotes standardisation in the use of flint by Palaeolithic societies following a chronological order, from the older to the more recent periods. This information, and its contextualisation with the new perspectives resulting from the application of the geoarchaeological proposal used to understand flint procurement, allows us to understand the general tendencies of raw material distribution of the region. Especially, we can detect how the absence of geoarchaeological methodologies of other raw materials than flint has modified the perception of the economic and social dynamics articulated around raw material by Palaeolithic people. This bias does not only affect the geographical and chronological axes, emphasising information from the regions and periods where flint is represented, but also promotes the over-interpretation of long-distance procurement, therefore, building up narratives exclusively based on human mobility.
This situation has generated an incomplete and unbalanced picture of the procurement and management strategies followed by Palaeolithic societies because quartzite, the second most-often used lithic raw material, and other raw materials have only been studied using geoarchaeological methods within the last few years. This research finally points to the continuation of in-depth research of quartzite and other raw materials as the next steps to re-interpret the current paradigms about procurement and management of raw material by Palaeolithic societies, and, therefore, modify our perspectives of social and economic territories
Functional use of large stone tool from the Upper Paleolithic site of Kamennaya Balka II (the Northern Azov Sea region, Russia)
Full text linkThe assemblages of many Paleolithic sites on the Russian Plain contain large pebbles of various types of stone, which, due to the natural and unmodified forms, rarely become objects of special study. Some of them retain their natural shape, others are slightly artificially modified. In the course of our research, artifacts from several Paleolithic sites in Russia and the Republic of Moldova were subjected to a comprehensive study. Technical-morphological and experimental-traceological studies made it possible to characterize the methods of their manufacture and use. Among the items studied, there is a trapezoidal slab retrieved in the lower layer of the Late Paleolithic stratified site Kamennaya Balka II (the Northern Azov Sea region, Russia). On its surface, use-wear traces were found, which are characteristic of wear traces on tools used to grind plant materials. To verify the results of the traceological analysis, a series of experiments was performed. The wear traces on the working part of the experimental tool turned out to be similar to those found on the original one. The functional identification of the slab from Kamennaya Balka II as a tool for processing plants was also confirmed by the discovery on the working surface of mineralized starch grains.
This comprehensive study of an unmodified stone artifact from the Kamennaya Balka II site and its identification as the lower grinding stone indicates the presence of complex foraging strategies among the economic activities of the inhabitants of the site and their successful adaptation to the natural environment in this region
Inefficient practice of flint heat treatment at Hasankeyf Höyük: An anti-functional view
Full text linkThis paper investigates the heat treatment of flint practiced at the Neolithic site of Hasankeyf Höyük in southeast Turkey. It does not involve petrographic or geochemical analysis to identify the physical and chemical evidence of heat treatment but aims to understand cultural aspects of the use of ancient lithic technology, using heat treatment as a case study. Heat treatment is a lithic production technique in which siliceous rocks are heated by controlled fire in order to improve their flaking quality. Archaeological evidence of heat treatment is seen all over the world, and numerous studies have contributed to the better understanding of this technique. However, what is particularly intriguing in the case of Hasankeyf Höyük is that there are many flint artefacts which were apparently overheated and unusable due to the frequent failure in achieving successful heat treatment. On the other hand, experimental studies using an electrical furnace and open fire show that once the appropriate heating time and temperature are learnt, the heat treatment of local flint at Hasankeyf Höyük is an easy process and does not require high technical skill. It is therefore suggested that heat treatment at this site was exercised along non-economic principles by people who were not very keen on improving technological efficiency, even when they could have easily done so
The T-shaped “axe” from Northeast Honduras: Observations on chronology and function of a pre Columbian stone tool
Full text linkThis paper provides a description and analysis of a distinctive type of pre-Columbian stone tool, usually termed a T-shaped axe, found almost exclusively in Northeast Honduras, Central America. There have been very few detailed or technical studies of lithics from Honduras. Early archaeological research and the current understanding of the regional prehistory are included, with Northeast Honduras viewed as a frontier zone located between the Mesoamerican and Isthmo-Columbian culture areas. Our study examines, in particular, a collection of these tools curated today at the Cambridge University Museum of Archaeology and Anthropology (CUMAA). The 39 (whole and fragmentary) specimens were collected between 1937 and 1939, from the Bay Islands, Northeast Honduras, but have never been published. This paper classifies the collection specimens into five varieties, based on morphology, with sample statistics, form dimensions, and illustrations provided for each. Manufacturing technology is primarily percussion flaking. The tool type is compared with similar specimens excavated and described from the Bay Islands and adjacent Honduran mainland, and with similar appearing implements from elsewhere in Central America. Insights about the possible age and function of these unusual, and distinctive, lithics are included. Based on preliminary macroscopic and microscopic analyses, it is concluded that the tools may have been employed as agricultural implements (hoes or spades), primarily for digging activities, rather than as axes or weapons used for cutting and slicing. It is most likely that these implements first appeared about 800 CE, and continued in use until at least 1400 CE. The tool type is most probably a local (not imported) product. More functional analysis is encouraged
Economy and status of Neolithic to Early Bronze age sites in the Southern Caucasus during the 6th‐3rd mill. BCE: The evidence from ground stone tools
Full text linkIn the Southern Caucasus, the evolution of the Neolithic to Bronze age (6th-3rd millenia BCE) economies is often investigated through the prism of adaptation to constrasted landscapes and environments (arid plain, high moutains, subtropical western coasts) and strategies of natural resource exploitation. This overview of the main technological and functional characteristics of ground stone tools from about 20 sites in the Kura Valley (Georgia, Azerbaijan) contributes to the discussion surrounding these questions. After an overview of the evolution of the grinding equipment and stone tool manufacture within a long term perspective, from the Late Neoliothic to the Early Bronze Age, several issues are adressed. The composition of the macrolithic toolkit is a key issue when discussing the importance of agriculture versus pastoralism in the economy of these populations, which evolved in different regional and environmental contexts. Its management also contributes to our understanding of the degree of sedentarity versus mobility of the populations. Finally, we discuss how the technical evolution of the macrolithic toolkit reflects the principal global changes occurring during this long period of time (neolithisation, emergence of metallurgy, and the mining phenomenon) and their cultural meaning. Our initial results underline the significance of some implements as cultural markers, and also contribute to defining the common cultural background and regional specificities within the South Caucasus region
A prehistoric jade axe from Galicia (Northwestern Iberia): Researching its origin
Full text linkThe Vilapedre axe (Lugo, Northwest Iberia) has been traditionally considered by archaeologists as evidence of prehistoric long-distance contacts along the Atlantic Coast of France and Spain. This artefact - as other “Tumiac type” axes (long polished blades, generally butt-perforated) - would have been produced in Brittany during the Neolithic (5th millennium BCE) using jadeitite as raw material, a green-coloured rock for which there are sources in the western Italian Alps. In this paper, we have traced the possible archaeological origin of this artefact back by examining the personal files of one of its first owners, Santiago de la Iglesia. Furthermore, we have conducted a mineralogical (X-Ray Diffraction, XRD) and an elemental analysis (Scanning Electron Microscopy with Energy Dispersive X-ray Detection, SEM-EDX) of both the Vilapedre axe and geological samples from several places at the Alps where prehistoric quarrying of greenstones has been reported. The aims were physicochemically characterizing the axe to provide information about its possible geological source. During our analyses, we have found significant compositional similarities between the Vilapedre axe and one of the geological samples coming from the Alps (Alp06). The results are therefore consistent with the alleged Alpine origin of this artefact. The presence of this axe in Northwest Spain, together with other evidence, such as the presence of objects of Iberian origin in Breton monuments, strongly suggests the existence of contacts between both regions of the Atlantic façade during the Neolithic onwards in which seafaring would undoubtedly have played an important role.El hacha de Vilapedre (Lugo, Noroeste de la Península Ibérica) ha sido tradicionalmente considerada por los arqueólogos como una evidencia de contactos a lo largo de la costa atlántica de Francia y España durante la Prehistoria Reciente. Esta pieza, al igual que otros ejemplares "tipo Tumiac" (láminas pulidas, generalmente perforadas en el talón), se habría producido en Bretaña durante el Neolítico (5º Milenio aC) utilizando jadeitita como materia prima, una roca de color verde cuyas fuentes se localizan en los Alpes italianos occidentales. En este trabajo, hemos realizado un análisis mineralógico (Difracción de rayos X, DRX) y otro elemental (Microscopía electrónica de barrido con detección de rayos X por dispersión de energía, SEM-EDX), tanto de la pieza mencionada como de muestras geológicas alpinas tomadas en lugares con indicios de extracción en época prehistórica. Los objetivos son caracterizar fisicoquímicamente el hacha a fin de obtener información sobre sus posibles fuentes geológicas. Los resultados son consistentes con un origen alpino de la materia prima empleada en la fabricación del hacha de Vilapedre