Journal of Lithic Studies
Not a member yet
375 research outputs found
Sort by
Early Middle Palaeolithic occupations at Ventalaperra cave (Cantabrian Region, Northern Iberian Peninsula)
Get PDFThe Middle Paleolithic assemblage from Ventalaperra level III, excavated in 1931 by Aranzadi and Barandiarán, was initially interpreted as being Aurignacian, and then as a Late Middle Paleolithic assemblage. Recent excavations at the site undertaken by Ruiz Idarraga and d\u27Errico have confirmed the Middle Paleolithic attribution, and have additionally produced data on subsistence strategies and environmental conditions. The results obtained from the technological analysis made on level III’s assemblage suggest that its characteristics fit with an Early Middle Paleolithic attribution. The extensive use of local raw materials, the absence of ramified productions, and the use of centripetal (Levallois and Discoid) and SSDA flaking systems, link this assemblage with sites like Arlanpe and Lezetxiki VI which have been dated to the end of the Middle Pleistocene, or nearby sites such as Abrigo Rojo, still under study. This reveals a behavioral pattern for Early Middle Paleolithic populations in the eastern Cantabrian Region characterized by an extensive use of the landscape, high mobility, short occupations and a high dependence on local resources to assure subsistence and technological provisioning
The Southern Divide: Testing morphological differences among bifacial points from southern and southeastern Brazil using geometric morphometrics
Get PDFBifacial points have been used to characterize the “Umbu” tradition in southern and southeastern Brazil. This archaeological tradition has been related to sites dated from the late Pleistocene-early Holocene boundary to near historical times. Such a huge temporal range and vast territory have suggested the existence of greater diversity within this tradition that has been ignored thus far due to the lack of systematic regional studies of such points. Through geometric morphometric analysis, this article aims to test the hypothesis that there are substantial differences in the Holocene bifacial points associated with the Umbu tradition in southeastern Brazil. Five landmarks were digitized in standardized photographs from 658 points from the states of São Paulo, Paraná, Santa Catarina, and Rio Grande do Sul. The results show that points made by groups from southeastern Brazil (São Paulo state) present a very distinct morphology (size and shape) in comparison to those made by the southern groups (Paraná, Santa Catarina and Rio Grande do Sul). This would indicate a regional identity shared only by some groups from São Paulo (at least regarding the projectile points). It is possible that Umbu tradition presents a more restricted range, both in chronological and spatial terms, than the one proposed so far
Bilingual Research Article Template (Primary = English)
No full textMS Word template file for articles with bilingual titles and captions, and an extended abstract in the second language.This template can be used for the following types of articles.Research articlesResearch articles should present original research on completed projects or significant discoveries and must present clear conclusions.Word limit: 6000 wordsShort reportsShort reports should present project descriptions. They may be either general reports on completed projects or significant updates for on-going projects. They do not necessarily need to present conclusions or conclusions could be preliminary.Word limit: 1000 wordsMethodology demonstrationsThese articles should explain a new or modified methodology tested by the authors. Authors are encouraged to use a variety of media types (e.g. video, screen shot images, 3D images) in addition to a short written text. Methodology demonstrations do not necessarily need to present conclusions but opinions on the method including its benefits as well as short-comings should be discussed.Word limit: 2000 words Summary, synthesis, and annotated bibliography articlesThese articles present an overview of a particular topic or sub-field with a connection to lithics research. This may be lithics research in a particular country or region. It may also be a historical overview of a topic (e.g. historical perspective of a prehistoric technology, or historical overview of a particular theory), or it may be a summary of knowledge about a lithic material itself or a scientific method. In general, these articles should include an overview of the history of the topic (e.g. history of lithics research in the region) as well as an overview of the current research being done on the topic. They should contain a large bibliography so that readers can use the articles as a starting point for finding references. The author should indicate recommended references.Recommended word limit: 4000 words. General description.The following are the general modifications for English articles with a secondary language. The main difference is that there is an extended abstract in the secondary language (in addition to the regular abstract in English) which is longer than normal. The main purpose of these articles is to help disseminate research in the area in which it was conducted. The extended abstracts help readers determine the content of the article if they have limited English reading skills. Bilingual articles:1. Articles have an extended abstract in the secondary language (see below).2. The title is translated into the secondary language.3. Keywords are in both languages.4. For articles using non-Latin alphabets (e.g. Cyrillic, Arabic, Chinese), Romanisations of the author’s names and contact information are used in the primary front page, but appear in their original alphabet along with the secondary language title and abstract.5. Figure and table captions appear in both English and the secondary language. Figures which contain English text which would be different in the secondary language (e.g. place names or object labels) will have either an explanation or translation in the translated caption, or will provide a glossary at the end of the article. Alternatively, text on the figure may be in both languages if it does not detract from the image.6. As in regular articles, bibliographic references which are not in English will include a translation of the title into English. They may also have a second translation of the title into the secondary language of the article. Additionally, references which are in English will include a translation of the title into the secondary language of this article. Extended abstracts:7. 500-1000 words.8. Follow the same format as the article but have no headings.9. Must mention methodology, overview of results, and conclusions.10. Appear at the end of the article (along with the secondary language title and keywords)
Before Lagoa Santa: Micro-remain and technological analysis in a lithic artifact from the Itaparica industry
Get PDFIn this article we present the results of a series of analysis performed on a lithic artifact from the Itaparica industry, a limace, found in Lapa Grande de Taquaraçu, an archaeological site bordering the Lagoa Santa area in Central Brazil. The site was occupied between 11.477 ± 133 cal. BP and 1.087 ±78 cal. BP, and the archaeological record for this occupation is related to the archaeological Lagoa Santa Tradition. However, the artifact was found in deeper and relative older archaeological levels, in a different stratigraphy context. The technological analysis confirms its exotic nature, not corresponding to the Lagoa Santa industry, but to another Paleoindian archaeological tradition instead. Its technological features are similar to the limaces related to Itaparica Tradition lithic industries. It’s important to notice that this is the only limace found at Lagoa Santa until now, and archaeological context did not allow us to associate it to the Lagoa Santa Tradition. In order to have an insight on the use of this artifact we performed some technological and micro-remain analysis. Various starch grains and other materials were recovered from the active parts of the artifact. The microbotanical analysis indicated the use of the artifact for processing starchy plants. As far as we know, this is the most ancient evidence of the processing of starchy plants in the Americas
Studies of indigenous lithic procurement in Uruguay and their implications for Southern Cone archaeology
Get PDFBeing a territory with several minerals and rocks suitable for knapping and grinding, Uruguay offered a lithic-rich environment for past indigenous cultures in the Southern Cone of South America. In this paper, a history of lithic procurement studies in Uruguay is presented. Three main periods are discriminated, paying attention to authors’ theoretical and methodological contributions to the field. Firstly, a period with general mention to raw materials utilised by indigenous groups, including those historically known, is recognised at least since the last decades of the nineteenth century. Secondly, a period involving description of lithic resources available at a national scale as well as the first detailed observations of lithic sources and possible means of procurement can be distinguished between the 1950s and the mid-1980s. Lastly, beginning with salvage archaeology in the eastern region, the current period of research (i.e. the last thirty years) is characterised by contextualising lithic procurement within issues of lithic technological organisation and settlement patterns of indigenous groups. The current period of studies has involved two different approaches: 1) technological analysis of lithic artefacts and comparison of raw material with previously-published geological data; 2) utilisation of field survey data that locate and map lithic resources, and characterisation of visual (macroscopic, microscopic, or both macroscopic and microscopic) and geochemical components of these resources. Within the latter, studies can be further arranged according to the main temporal framework used to contextualise research problems. On the one hand, questions involving lithic procurement of early hunter-gatherers (who arrived ca. 12,000 BP) since the end of the 1990s have included surveys of potential and utilised sources, the first thin-section-based petrographic studies and the distinction of different local, regional and long-distance procurement strategies. On the other hand, cultural changes since the Middle Holocene have framed lithic source survey studies to answer questions of resource accessibility for coastal groups during sea level changes, as well as for other now-diverse groups such as the lowland moundbuilders. Finally, considerations for future research are made by reconsidering recent developments alongside the history of lithic procurement studies in Uruguay.
Roman whetstone production in northern Gaul (Belgium and northern France)
Get PDFThis paper focuses on the latest research on the production of Roman whetstones in northern Gaul. To date, little has been written about this specialised industry. However, three workshops producing whetstones were discovered recently in the north of Gaul in Buizingen (Province of Flemish Brabant, Belgium), Nereth (Province of Liège, Belgium) and Le Châtelet-sur-Sormonne (Department of Ardennes, France). Production debris and rough-outs recovered at these sites allowed us to reconstruct the operational sequence of manufacture, from the choice of raw material to the finished product. Technological studies enabled us to determine the production stages and highlight the similarities and differences between the three study areas. Analyses of the materials reveal the use of fine-grained sedimentary and low-grade metamorphic rocks outcropping near the workshops. All these rocks are linked to the Caledonian inliers of Brabant-London, Stavelot-Venn, and Rocroi. The large amount of waste found at Le Châtelet-sur-Sormonne, far more than that recovered at Buizingen and Nereth, is indicative of the economic importance of this whetstone workshop. This importance is reflected in the fact that whetstones from Le Châtelet-sur-Sormonne are distributed over a large area throughout Belgium, France (Nord-Pas-de-Calais, Picardie and Champagne-Ardenne regions), Germany, and the Netherlands. This paper presents the waste and rough-outs from the three production sites. It also defines rock types and their origins and offers insights into whetstone manufacturing processes and techniques
Introduction. Leave no stone unturned: Perspectives on ground stone artefact research
Get PDFGround stone tools served in many physical and social contexts through millennia, reflecting a wide variety of functions. Although ground stone tool studies were neglected for much of early archaeology, the last few decades witnessed a notable international uptick in the way archaeologists confront this multifaceted topic. Today, with the advance of archaeology as a discipline, research into ground stone artefacts is moving into a new phase that integrates high resolution documentation with new methodological, analytical techniques, and technological approaches. These open new vistas for an array of studies and wide-ranging interpretive endeavours related to understanding ground stone tool production and use. Inspired by these diverse analytical approaches and interpretive challenges, we founded the international Association for Ground Stone Tools Research (AGSTR) in order to promote dialogue and create an optimal, inclusive arena for scholars studying various aspects of ground stone artefacts. Scholars from around the globe met for a five day conference at the University of Haifa, for the first meeting of the newly founded AGSTR. This included the presentation of 47 papers and 17 posters. The current paper serves as an introduction to this special issue of JLS, devoted to the proceedings of the founding conference of the Association for Ground Stone Tool Research, held at the University of Haifa during July 2015
Chert from the Vegamián Formation: A new raw-material supply source in the Cantabrian Mountains (NW Spain) during prehistory
Get PDFThis work provides the keys to the mineralogical and geochemical characterization of black chert from the Vegamián Fm. This formation crops out throughout the whole of the Cantabrian Zone (of Palaeozoic age), one of the geological zones of the Cantabrian Mountains (NW Spain). The geographical distribution of this formation is very wide, surfacing in the provinces of León, Asturias, Palencia and Cantabria.This variety of chert had been included within the group generically known as ‘black chert’, a macrogroup including different types of chert that appear in different Palaeozoic formations in the area and which share a characteristic black colour at the macroscopic level. The characterisation presented here has enabled us to distinguish it from other varieties. In this study, Vegamián chert has been divided into two different groups depending on their textural, mineralogical, geochemical and thermal propierties. Type 1, the most suitable for knapping, is characterized by high content in silica (>97%), laminated matrix and, occasionally, ghost of radiolarians. In addition, the characteristics specific to this chert make it suitable for lithic knapping processes. To confirm its use by prehistoric populations, this chert will be compared to that found in two Mesolithic sites, the caves of La Uña and El Espertín (León, south versant of the Cantabrian Mountains), the raw materials from which are currently under study
Knapping methods and techniques in the bracelets quarry of Cortijo Cevico (Loja, Granada)
Get PDFThe stone bracelets are one of the most outstanding elements of personal ornaments of the ancient Neolithic in Western Mediterranean and the South of the Iberian Peninsula (5500-4800 cal. BCE). These bracelets are considered an element of cultural identity and a chronological marker of the first Neolithic societies in these areas. The study of the production processes of this ornament has brought a new approach to social relations of the early Neolithic groups of this area. The existence of specialized workshops and the circulation of these objects show the shift towards more complex social organizations. The aim of this paper is to present knapping methods and techniques carried out in the Neolithic bracelets quarry of the Cortijo Cevico. This quarry has recently been discovered and excavated, and it is the first site of its kind in the Iberian Peninsula. It is a rocky outcrop in the geological formation of Trías de Antequera, formed by dolomitic marbles. On this site we carried out the extraction works, as well as the first transformation of the knapping performs that were going to be processed as bracelets. In addition, we have applied for the first time in this paper the methodology consists on using diacritical schemes in the knapping waste of the bracelets. This methodology, along with experimentation and technical stigmas, has allowed the recognition of the techniques and methods applied to knapping dolomitic marbles and these are presented for the first time in this paper.
A techno-typological analysis of fan (tabular) scrapers from Ein Zippori, Israel
Get PDFFan (or tabular) scrapers are a diagnostic tool type in Chalcolithic Ghassulian and Early Bronze Age lithic assemblages from the southern Levant. To date, only small numbers of fan scrapers have been reported from the Late Pottery Neolithic Wadi Rabah culture. In this paper we present a techno-typological analysis of a fair sample of fan scrapers and fan scrapers spalls from Wadi Rabah and Early Bronze Age layers at Ein Zippori, Lower Galilee, Israel. Techno-typological similarities and differences of Wadi Rabah, Chalcolithic Ghassulian and Early Bronze Age fan scrapers from Ein Zippori and other sites in the region are presented, trends of change along time are noted, and an updated definition is proposed. Our results indicate that fan scrapers are highly efficient tools for accurate and prolonged animal butchering and hide working. The main advantage of fan scrapers is their mostly flat, thin morphology and large size that permits the creation of several relatively long working edges, various retouched angles (from sharp to abrupt), extensive resharpening, and a comfortable grasp. While fan scrapers were products of a local trajectory in Late Pottery Neolithic Wadi Rabah lithic industries at Ein Zippori, a standardized, off-site manufacturing of fan scrapers is evident during the Early Bronze Age