Journal of Applied and Natural Science
Not a member yet
2928 research outputs found
Sort by
Effect of biovita granules and liquid on growth and yield of cotton (Gossypium hirsutum L.)
Get PDFA study was conducted on effect of biovita granules and liquid on growth and yield of cotton during Kharif 2014 and 2015 in deep black soil at ARS, Dhadesugr, University of Agricultural Sciences, Raichur, Karnataka. Pooled data revealed that, cotton yield and green biomass yield were significantly (p=0.05) higher in the treatment with the application of biovita granule at 12.5 kg per hectare at one month after sowing followed by first spray of biovita liquid at 500 ml per hectare at square formation followed by second spray of biovita liquid at 750 ml per hectare at flowering and followed by third spray of biovita liquid at 750 ml per hectare at boll formation (1450 kg/ha and 1463 g/plant, respectively) and which was on par with the application of biovita granule at 10.0 kg per hectare at one month after sowing followed by first spray of biovita liquid at 500 ml per hectare at square formation followed by second spray of biovita liquid at 750 ml per hectare at flowering and followed by third spray of biovita liquid at 750 ml per hectare at boll formation (1377 kg/ha and 1439 g/plant, respectively). Whereas, application of only recommend-ed dose of fertilizer recorded significantly less cotton and green biomass yield compared to other treatments. The average per cent of increase in yield in biovita applied treatments (T1 to T8) over the no application of biovita treat-ment (T9) was 7.13 %
Development of stripper harvester for paddy
Get PDFKonkan is the coastal part of Maharashtra between Western Ghat and Arabian seacoast. Rice is a major crop grown over 3.86 lakh hectares. Stripper harvesting technology, which strips only seeds and keeps straw erect-ed in the field present bright prospect for the development of small, light, efficient mechanism by reducing number of operation with increased capacity and lesser power compared to conventional cutter bar combine harvester. The big machines like combine harvester and high capacity threshers for harvesting and threshing have limitations. A proto-type of paddy stripper harvester was developed considering the limitation of Konkan like small, fragmented land, hilly, terrace farming and high rainfall. It consisted of stripping mechanism, grain tank, hydraulic system, steering system, gear box, engine, cage wheel and chassis. The arrangement of V-belt and set of pulleys were made to transmit power from gear box to stripper rotor. The effect of forward speed and peripheral speed on shattered and un-stripped grain loss was studied. The shattered grain loss was decreased with increase in forward speed whereas decreased initially and then increased with increase in peripheral speed. The un-stripped grain loss was decreased with increase in forward and peripheral speed. The performance of the developed prototype was found better at forward speed of 2.25 km/h and peripheral speed of 19.78 m/s. During final testing of prototype, shattered and un-stripped grain loss was found 5.95 and 1.89 %, respectively. The average field capacity and field efficiency of paddy stripper harvester machine was found 0.14 ha/h and 69.38 per cent respectively
State space modelling and forecasting of sugarcane yield in Haryana, India
Get PDFBox and Jenkins’ Autoregressive Integrated Moving Average (ARIMA) models are widely used for analyzing and forecasting the time-series data. In this approach, the underlying parameters are assumed to be constant however the data in agriculture are generally collected over time and thus have the time-dependency in parameters. Such data can be analyzed using state space (SS) procedures by the application of Kalman filtering technique. The purpose of this article is to illustrate the usefulness of state space models in sugarcane yield forecasting and to pro-vide some empirical evidence for its superiority over the classical time-series analysis. ARIMA and state space models individually could provide the suitable relationship(s) to reliably forecast the sugarcane yield in Karnal, Ambala, Kurukshetra, Yamunanagar and Panipat districts of Haryana (India). However, the state space models with lower error metrics showed the superiority over ARIMA models for this empirical study. The sugarcane yield forecasts based on SS models in the districts under consideration showed good agreement with State Department of Agriculture (DOA) yields by showing 3-6 percent average absolute deviations
Optimization of biogas production from water hyacinth (Eichhornia crassipes)
Get PDFThe present investigation reports the optimization of process parameters for biogas production from water hyacinth (Eichhornia crassipes). The different parameters like particle size, inoculum concentration, incubation temperature, metal ions and pH were optimized for biogas production. Maximum biogas was observed with water hyacinth of 1cm size, 40 % inoculum concentration. The temperature of 45°C along with neutral pH i.e. 7 was found to be most suitable for biogas production in the presence of manganese chloride (0.2 mM). Under optimized conditions, 44.9 l biogas/kg water hyacinth, 360.09 l/kg total solids and 397.95 l biogas/kg volatile solids were produced in a period of 40 days. The water hyacinth has proven to be a good source of biogas production and thus can be utilized as a potential feedstock for the biogas production
Biological relationship of Bean common mosaic virus (BCMV) infecting cowpea with leguminous plant species
Get PDFBean common mosaic virus (BCMV) associated with cowpea mechanically inoculated to different legumi-nous plants. Out of nineteen including cowpea Var.C-152, the virus was easily transferred to ten different legumi-nous hosts. All other hosts assessed for the presence of BCMV were found to be uninfected. The number of days taken for symptom expression and symptoms were varied within plant species. Pole bean expressed mosaic symp-tom after long incubation period (15-18 days) whereas, shorter incubation period was observed in common bean and rice bean (7- 10 days). BCMV produced chlorosis, mosaic, leaf distortion, puckering, vein banding, vein clearing and vein netting on cowpea(C-152). A typical virus symptom, mosaic was observed in green gram, common bean, lime bean, rice bean and yard long bean, whereas, leaf rolling and leaf distortion was observed in black gram, pole bean and snap bean. The virus-host relationship was confirmed by back inoculation test to C. amaranticolor. Further symptomatic plants were subjected for Reverse Transcriptase polymerase chain reaction (RT-PCR) for molecular confirmation using BCMV coat protein (CP) specific primer pair. A PCR fragment size of 439bp was amplified for the symptomatic plants. The results generated indicated the ability of a plant to support virus expression and host speci-ficity of BMCV within the leguminous plant species
The morphological and phenological performance of different cotton genotypes under different plant density
Get PDFThe field experiment conducted with different plant density and different Genotypes showed significant differences in their morphological characters and phenological characters. Among the genotypes, AKA-7 possessed higher plant height (116.4 cm), No. of sympodia (19.27 plant-1) and leaf area index (3.628) compared to other geno-types but leaf area (33.02 dm-2) and dry matter weight (103.21g/plant) were recorded higher with genotype Balwan. However, Normal plant density (100%) was registered higher plant height (102.6 cm), no of sympodia (17.33 plant-1), leaf area (27.02 dm2) and dry matter weight (58.13 g/plant) but higher leaf area index (3.430) was recorded with higher plant density (200%). Among the genotypes, AKH-081 was comparatively earlier in phenological characters i.e. first square (47.9 days), first flower (67.9 days), first boll burst (116.1 days), first picking (128.7 days) and final picking (178 days). However, Higher planting density (200%) was recorded earlier in first square (49.3 day), first flower (67.8 days), first boll burst (116.9 days), first picking (130.6 day) and final picking (179.7 days). On the basis of this experiment, genotype Balwan and normal planting density level (100%) recorded higher morphological development wherever phenological development recorded earlier with the each respective phenophase in the Gen-otype AKH-081 and highest planting density level (200%)
Growth, yield and nutrient uptake of hybrid rice as influenced by nutrient management modules and its impact on economic of the treatments
Get PDFField experiment was conducted at Instructional Farm of Narendra Deva University of Agriculture and Technology, Kumarganj, Faizabad to develop nutrient management modules for efficient cultivation of hybrid rice. Results showed that growth and yield characters viz. plant height, number of tilers and panicles per hills were high-est under nutrient management module of 100% NPK + 5 t press mud (T3). Significantly higher grain and straw yield was recorded under treatment T3 over all the treatment except treatment T1, T2, T4, T5 and T6 which were recorded on par. Uptake of NPKS and Zn was significantly improved under treatments having organic manure along with inorganic levels (100%, 75% and 50% NPK) of fertilizer over alone levels of inorganic fertilizer. NPKS and Zn uptake was higher in treatment module T3 followed by treatment T2 (100% NPK + 10 t FYM ha-1). The net return Rs. 27373.70 ha-1 and 26087.0 ha-1 and benefit: cost ratio (1.53 and 1.45) was maximum in treatment T3 closely followed by T2. Findings of this study warranted that treatment module T3 resulted higher growth and yield of rice crop. Net return was also higher in this treatment
Herbicidal effect on the bio-indicators of soil health- A review
Get PDFSoil microbial population, earth worms in soil, soil enzyme activity and organ carbon content in soil are considered as the bio indicators of soil health. They are used as indicators of soil health because of their active role in soil organic matter production, decomposition of xenobiotics and cycling of nutrients, ease of measurement and rapid response to changes in management practices. The assessment of soil health can be used to develop more sustainable crop production system. A number of herbicides have been introduced as pre and post emergence weed killer. The impact of herbicides on soil health depends on the soil type, type and concentration of herbicide used, sensitivity to non-target organisms and environmental conditions. The review elaborates the impact of herbicidal application on the biological indicators of soil health
Development and sensory evaluation of gluten free bakery products using quinoa (Chenopodium Quinoa) flour
Get PDFQuinoa based gluten free bakery products were prepared by supplementing roasted quinoa flour in oats and rice flour at different substitution levels and were organoleptically evaluated using eight point hedonic rating scale for sensory attributes by a semi – trained (including Professors and Assistant Professors not a professionally sensory panel) panel of 10 judges. Substitution of roasted quinoa flour at 5, 10 and 15 percent levels showed significant difference (p? 0.05) at 10 percent levels for all the products namely cookies, cakes, muffins, pies and tarts for overall acceptability. The products with 10 percent level of supplementation of roasted quinoa flour (10%) with rice (45%) and oats flour (45%) were found to be highly acceptable and the scores for overall acceptability for cakes (7.54), cookies (7.46), muffins (7.32), pies (7.78) and tarts (7.56) were achieved. The pies with 10 percent level of supplementation of roasted quinoa flour were considered as best product by the judges in terms of all the sensory attributes such as appearance, colour, texture, flavour, taste and overall acceptability. It may be concluded that roasted quinoa flour can be utilized successfully up to 10 percent level to prepare gluten free bakery products with high nutritional value without imposing negative impact on sensory attributes which may prove a boon to celiac patients
Nitrogen management of wheat cultivars for higher productivity - A review
Get PDFThe increased population pressure has led to the maximum use of chemical fertilizers especially in the major crops such as rice, wheat and maize production. India has an ever growing population needing food and also the growing urban middle class with higher standards of living is on the lookout for better quality product. The introduction of improved seeds increases the utility of traditional inputs and their consumption as well. Because of genetic variation, BVC 223, Qingnong 8, IPA99, CT 01217, Luomai 8, Seher 06, Sistan, Punjab 2011, Rasco 2005, PBW 343, Halna, HP 1744, VL Gehun 892, WH 1022, PBW 621, and PBW 550 cultivars of wheat crop differ in growth and development behaviour and respond higher to different nitrogen management practices. However, ever increasing prices of Nitrogen (N) fertilizers and possibilities of environmental pollution and groundwater contamination warn for their judicious and efficient use. The application of essential plant nutrients particularly N nutrient in optimum quantity (120-150 kg/ha) and right proportion (3-4 splits) through correct methods and time of application (LCC and green seeker based) is the key to increased and sustained crop production. The increase in quality due to nitrogen fertilization (120-330 kg/ha) may be due to its role in activation of cells division, metabolic and photosynthesis process and nutritive status of wheat plant. Keeping in view above all facts in mind, performance of wheat cultivars as influenced by different nitrogen rates will be discussed in this review